Bottles/Cages

Lightweight and integrated, our iS (Integrated Storage) Cache Cage is designed to keep you moving in the event of a trail side mishap. An inflation device, multitool (with chain tool) and bottle cage all integrated into one unit, there for when you unfortunately need it. The Cage features a neat flippable wing so it can be set for left or right hand users (or reversed for Seat tube mounting). The design is side entry so it will fit in tight spaces on full suspension frames and it's lightweight so you can use it on your cross country race bike. It's also designed to work perfectly with the new Scott Spark which features a recessed section on the downtube. The multi-tool features 8 forged and machined bits and we've added a corrosion resistant coating for longevity and protection. The slim chain tool mounts to the multitool for maximum weight savings and ease of use. The CO2 unit is our Boundary CO2 delivery system which offers a fast and efficient method to reinflate your tire in an emergency. The valve is protected to avoid accidental engagement and our design allows you to easily control the rate and flow of CO2. The pack contains a 16g cartridge, but is also compatible with 20g cartridges. - Our lightest & slimmest integrated MTB solution yet - Easy-to-use chain tool for trailside repair - Side-entry bottle cage - Flippable wing for left- or right-handed use - Optimized fit for recessed frame down tubes - High bottle retention - CO2 nozzle with air flow adjustment and 16g CO2 cartridge - Glass Fiber reinforced Nylon - steel tool plate / Hardened steel bits - T30/T25/Hex8/Hex5/Hex4/PH2/Chain tool/Chain link holder - 230g

Lightweight and integrated, out iS (Integrated Storage) Cache Cage is designed to keep you moving in the event of a trail side mishap. An inflation device, multitool (with chain tool) and bottle cage all integrated into one unit, there for when you unfortunately need it. The Cage features a neat flippable wing so it can be set for left or right hand users (or reversed for Seat tube mounting). The design is side entry so it will fit in tight spaces on full suspension frames and it's lightweight so you can use it on your cross country race bike. It's also designed to work perfectly with the new Scott Spark which features a recessed section on the downtube. The multi-tool features 8 forged and machined bits and we've added a corrosion resistant coating for longevity and protection. The slim chain tool mounts to the multitool for maximum weight savings and ease of use. The pump is MTB optimized for large volume delivery to get your tire back up to pressure fast. - Our lightest & slimmest integrated MTB solution yet - Easy-to-use chain tool for trailside repair - Side-entry bottle cage - Flippable wing for left- or right-handed use - Optimized fit for recessed frame down tubes - High bottle retention - Functional, high-volume MTB pump - Glass Fiber reinforced Nylon - steel tool plate / Hardened steel bits - T30/T25/Hex8/Hex5/Hex4/PH2/Chain tool/Chain link holder - 245g - MAXIMUM PRESSURE: 70PSI / 4.8 bar - AIR VOLUME PER STROKE: 67cc

Our Trail focused integrated storage bottle-cage has been designed to produce a flexible solution for riders. By rotating the cage 45 degrees we allow for a super low profile design to fit narrow frame spaces and with a side entry bottle. The cage can quickly and easily be mounted for left or right handed riders. The 19 function multi-tool includes an integrated chain tool. It fits snuggly and securely into the cage body and is easily and quickly removed. This model features our Boundary 2.0 HV (High Volume) mountain bike pump and the cage is also compatible with our Boundary CO2 nozzle (shims required) and our iS accessory tube mount. It's the choice for trail riders looking for a lightweight solution to on the bike storage. - Integrated Storage side entry bottle cage mountable either left or right handed - Multi-tool storage in the cage with fast access - Upgraded corrosion-resistant bit finish - 19 tools, including chain tool - Spoke keys and chain link holder - Functional high volume MTB pump

Our iS (Integrated Storage) solution for road and gravel riders, the iS Coupe cage is a top-entry cage that can be mounted anywhere on the bike. The 10-function multi-tool is securely housed behind the bottle and features a special finish for higher resistance to corrosion. The tool itself has 10 functions to help you get over basic trailside disasters. The CO2 unit is our Boundary CO2 delivery system, which offers a fast and efficient method to reinflate your tire in an emergency. The valve is protected to avoid accidental engagement, and our design allows you to easily control the rate and flow of CO2. The package includes a 16g cartridge. - Integrated Storage top entry cage - Upgraded bit finish for higher resistance to corrosion - 10 function multi-tool - Low profile design mounts seamlessly to the downtube or seat tube - New Boundary CO2 nozzle with 16g threaded cartridge

Blackburn's Cinch Carbon Cage embodies an elegant and sleek design that has a firm grip to keep your bottles cinched down. - UD Carbon Fiber - Uni-Directional carbon fiber material allows for maximum strength, and minimal material for ultimate weight savings - Bottle Retention - There is nothing worse than looking down at your bike and realizing that you have one less water bottle than you started with. Our cages are vigorously lab AND field tested at each stage of the development process to ensure that your water is safely held to the bike. Details: - Black Matte is the lightest color/finish combination. Weight may vary up to 3 grams between other colors/finishes. - Two mounting bolts included Dimensions: - Length 140mm/5.51in - Width 78mm/3.07in - Height 78mm/3.07in - Weight-16g/0.04lbs

The new S-Works Carbon Rib Cage III keeps the 100% FACT carbon fiber construction of yesteryear, but it ups bottle retention for super rough roads. The split design also provides pre-load to hold bottles securely, while making bottle entry as easy as possible. - FACT carbon construction creates a splendid fusion of strength, optimal bottle retention, and light overall weight. - Super-low bottle position improves the aerodynamic profile. - Tuned compression design provides secure bottle retention with easy in-and-out accessibility. - Weight: 24g

Our iS (Integrated Storage) solution for road and gravel riders, the iS Coupe cage is a top entry cage which can be mounted anywhere on the bike. The 10 function multi-tool is securely housed behind the bottle and features a special finish for higher resistance to corrosion. The tool itself has 10 function to help you get over basic trail side disasters. The HP pump stands for High Pressure. Road pumps need high pressure capabilities at a low volume to enable you to pump to the higher pressures of road tires. - Integrated storage top entry cage - Upgraded bit finish for higher resistance to corrosion - 10-function multi-tool - Low profile design mounts seamlessly to the downtube or seatube - High pressure road pump - Glass Fiber reinforced Nylon - Hardened steel bits - Hex2/2.5/3/4/5/PH2/FLAT/T10/20/25 - 2 bit adaptors : Hex 8mm / T30 - 120PSI / 8.3 bar - 194g approximate weight

28 grams 3-2.5 Titanium tubing Doesn't mark up your bottles Made in the USA Also perfect for: Under downtube location Tri-Athlete - behind seat

This is the rebirth of Blackburn's successful Camber Cage. Built tough to withstand MTB abuse, yet elegant enough to pop on your road bike, the Camber Cage pulls double duty, and looks good doing it. - Different color and finish options lets you pick a cage to match your bike - UD Carbon layup provides a smooth finish that reflects current carbon frame designs - “Rib cage” retention design hugs your bottles securely - Flared top opening assists with aligning your bottle to the cage while on the fly - 30 grams

Easy to use while riding, an absolute featherweight, and subtle Santa Cruz carbon bling for your bike. • Right or left hand sideload. • Designed and tested in our carbon lab in Santa Cruz, CA. • Secure hold, but still easy to remove and replace the bottle • Low-profile, 3mm hex bolt attachment • Lifetime warranty • Matte Carbon • Weight: 27 grams

Lightweight and integrated, our iS (Integrated Storage) Cache Cage is designed to keep you moving in the event of a trailside mishap. A multitool (with chain tool) and bottle cage all integrated into one unit, there for when you unfortunately need it. The Cage features a neat, flippable wing, so it can be set for left- or right-hand users (or reversed for seat tube mounting). The design is side entry so it will fit in tight spaces on full suspension frames, and it's lightweight, so you can use it on your cross country race bike. It's also designed to work perfectly with the new Scott Spark, which features a recessed section on the downtube. The multi-tool features 8 forged and machined bits, and we've added a corrosion-resistant coating for longevity and protection. The slim chain tool mounts to the multitool for maximum weight savings and ease of use.

Our iS (Integrated Storage) solution for road and gravel riders, the iS Coupe cage is a top entry cage which can be mounted anywhere on the bike. The 10 function multi-tool is securely housed behind the bottle and features a special finish for higher resistance to corrosion. The tool itself has 10 function to help you get over basic trail side disasters. - Integrated storage top-entry cage - Upgraded bit finish for higher resistance to corrosion - 10 function multi-tool - Low-profile design mounts seamlessly to the downtube or seat tube - Glass Fiber reinforced Nylon - Hardened steel bits - Hex2/2.5/3/4/5/PH2/FLAT/T10/20/25 - 2 bit adaptors : Hex 8mm / T30 - 98g approximate weight

This Zee Cage II was designed with an integrated EMT Cage Mount MTB Tool that has all of the trailside necessities required to get you out of a jam on your ride. For the cage itself, you'll find it to be respectably lightweight, and to have incredible holding power for when the trails get rough. For easy bottle access, we also gave it a unique side-loading design that allows you take pulls from the right or left-hand side depending on placement. - SWAT design allows for storage and tool integration. - Reinforced composite material improves durability without adding weight. - Includes EMT Cage Mount MTB Tool with 3, 4, 5, 6, 8mm, T25 Torx, and #1 flathead screwdriver. - Right-hand loading on the down tube—left-hand loading on the seat tube. - Sleek, minimalist design with razor-sharp graphics.

Integration has always been part of our thoughts when it comes to designing a new product. To be sure you leave home with all the essentials to fix any mechanical issue you might find along the way, we designed a range of bottle cages including an integrated room to house an 8-bit multi-tool and chain tool making sure you get back on the bike in no time. This cage is optimized for left-handed bottle entry. - Integrated Storage side entry bottle cage - Multitool storage in water and dirt resistant drawer - 14 tools, including chain tool, spoke keys and chain holder - Multiple mounting options to fit most frames

The path to reliably clean drinking water begins with Eddy + filtered by LifeStraw. Whether you are a couple days into a backcountry trip or looking for an everyday water bottle, you need a trustworthy source for safe water wherever you roam. Water passes through two separate stages of filtration-the Hollow Fiber Filter removes bacteria, parasites, and microplastics and the Ion Exchange Filter reduces lead, bad taste, chlorine and other unwanted chemicals. Leak-proof when closed and spill-proof when open, the universal Eddy + straw cap and bite-valve interface delivers a high flow for steady hydration when you need it most. The main vessel is made with Tritan Renew, a highly durable and lightweight plastic made with 50% recycled material. A more sustainable solution, Tritan Renew is made using a recycling process that's more efficient than standard mechanical recycling, producing a superior material with less demand on finite resources. It's odor and stain resistant and free of BPA, BPS, and BPF.

The Roaster™ bottle has TempLock™ double-wall vacuum insulation that keeps chai hot up to 8 hours, coffee on ice for 30 hours, and a bottle of your favorite brew cold for 12 hours. The patented Roaster™ Cap is insulated and designed for sipping, drinking or chugging. - TempLock™ Double Wall Vacuum Insulation keeps drinks up to 8 hours hot, 30 hours iced and 12 hours cold - EarthGrip™ Powder Coat finish is tactile, easy to grip and extremely durable - 18/8 Kitchen-Grade Electropolished Stainless Steel doesn't transfer flavor, no metal aftertaste - Roaster™ cap is made with multiple layers of ThermaGrid™ waffle insulation to prolong thermal protection - BPA-free and phthalate-free - Does not sweat - Dishwasher safe (hand wash recommended) - Leak-free design - Patented design - Lifetime warranty

It grips the hand and won't let go. Shaped for comfort and finished with our EarthGrip™ textured powder coat paint, this vacuum insulated pint is unabashedly sublime. At the core, our TempLock™ double wall vacuum insulation and electropolished steel preserves taste and keeps favorite brews cold for hours on end, drinks on ice for 24 hrs, and coffee hot for 8 hrs. Includes an insulated lid and silicone cork to keep your drink at optimal temperature. Lid compatible with straws up to 8mm in diameter. TempLock™ double wall vacuum insulation EarthGrip™ powder coat finish is tactile, easy to grip and extremely durable 18/8 kitchen-grade electropolished stainless steel doesn't transfer flavor, no metal aftertaste Silicone cork is an effective splash guard when on the go Accommodates reusable straws up to 8mm in diameter BPA-free and phthalate-free Does not sweat Dishwasher safe (hand wash recommended) ??Patent pending Lifetime warranty

From the city to the trail, each piece of Timber to Town gear is thoughtfully designed to enrich a life lived by bike. Made in Japan from 5mm stainless steel tubing, the ZigZag Bottle Cage has a simple, elegant design that is both subtle and eye-catching. - 5mm stainless steel tubing - Simple, elegant design - Comes with stash bag for snacks, loose change, etc - Made in Japan - 80 grams (2.8 ounces)

A harmonious marriage of two classic Blackburn products: a cargo rack and bottle cage in one. Blackburn's Outpost Cargo Cage provides a solution to carrying your oddly-shaped gear along for the ride. - Securely strap down odd size bottles and other gear, such as bags and clothing - Mounts to 2 standard bottle cage bosses - Three sets of mounting holes to fit different size frames - Included silicone-backed webbing straps prevents your cargo from jostling free - 6mm alloy tube construction - 4kgs/8.8lbs carrying capacity - Weight: 164 grams w/ straps

Carry the strange Designed to carry bulky items, like sleeping pads, on the sides of your fork legs to free up valuable space in your bags. The perfect marriage of two classic Blackburn products … a cargo rack and bottle cage in one. The Outpost comes with two compression straps to help you carry even more on your adventures. - CARRY BULKY ITEMS - Mounting these cages to your downtube or fork legs will allow you to carry bulky items like coats, tents and sleeping bags outside of your seat post or handlebar bags. - INCLUDES STRAPS - Outpost cages include rubberized straps to keep your cargo securely attached where you want it. - LIFETIME WARRANTY

TempLock™ Double Wall Vacuum Insulation keeps drinks up to 8 hours hot, 30 hours iced and 12 hours cold EarthGrip™ Powder Coat finish is tactile, easy to grip and extremely durable 18/8 Kitchen-Grade Electropolished Stainless Steel doesn't transfer flavor, no metal aftertaste Roaster™ cap is made with multiple layers of ThermaGrid™ waffle insulation to prolong thermal protection BPA-free and phthalate-free Does not sweat Dishwasher safe (hand wash recommended) Leak free design Compatible with Roaster™, Kewler™, and Kewler™ Opener Cap US Patents D626,414 and D814,236 Lifetime warranty

304 Stainless steel tubing Doesn't mark up your bottles Made in Durango, Colorado U.S.A. 48 grams Also perfect for: Klean Kanteen™ 27oz or 16oz insulated waterbottles

304 Stainless steel tubing water bottle cage Doesn't mark up your bottles Made in Durango, Colorado U.S.A. 48 grams Also perfect for: Under downtube location Tri-Athlete - behind seat

The Lucky Cat Cage is made from a single sheet of lightweight 5052 alloy. Cut in the shape of a Maneki-neko (Japanese for "beckoning cat"), this Portland Design Works bottle cage will undoubtedly bring good luck to its owner. Its side loading design makes it a great fit on small bike frames.

The shape of the white VGD Cage was inspired by the legendary brandy toting St. Bernard rescue dogs of the Swiss Alps. The black VGD was designed to represent another type of rescue dog: the everyday Black Lab mix who's waiting to steal your heart and be adopted at the local shelter. - PDW donates 10% of profits from the Very Good Dog (VGD) Cage to animal advocacy organizations that help very good dogs in need.

The Looney Bin is the place for those that just can't get along with the rest. Not every bottle is 73mm and not everyone wants to use a "regular" bottle while on their bike. The Looney Bin will hold anything from a convenience store bottle of H2O to a nice bottle of Pinot Noir. This is the perfect cage for a commuter rig or the Mixte for that spring picnic. Drink and ride responsibly… - Fits bottles 65-95mm

The Happy Can from BiKASE is a convenient handlebar/stem mounted drink holder or general purpose stash sack. Using a few hook and loop straps, the Happy Can mounts between your handlebar and stem so you have easy access to your beverage or other items. - easily connects to handlebars and stem using 2 Velcro straps - securely fits cycling water bottle or other bottle sizes - perfect to use as a small storage bag for snacks or phone - mesh side pocket - rain fly with draw string to secure water bottle on bumpy rides

Modern mountain bikes' fancy suspension and lower standover height have put water bottle cage real estate at a premium, but Blackburn's Wayside Side Entry MTB Cage buys back some space! - Left or Right Handed - This 2 piece system can be installed so that the bottle is able to exit from either the right or left side. No extra hardware is required and the cage installs easily and quickly. - Bottle Retention - There is nothing worse than looking down at your bike and realizing that you have one less water bottle than you started with. Our cages are vigorously lab AND field tested at each stage of the development process to ensure that your water is safely held to the bike. Details: - Standard 65mm center-to-center hole spacing - Two mounting bolts included Dimensions: - Length 140mm/5.51in - Width 87mm/3.43in - Height 87mm/3.43 - Weight 45 Grams

The PDW Hot Take cup holder is adjustable to hold most any size of travel thermos. Its soft design will keep hot or cold liquids at arm's length, secure and rattle-free.

The Otter Cage is made from a single sheet of lightweight 5052 alloy. The arms of the otter cradle your water bottle nice and tight like a mama otter floating on her back with her pup. We donate 10% of the profits from the Otter Cage to organizations that protect wildlands & wildlife, organizations like Oregon Wild. - 10% of profits from the sale of this cage will be donated to organizations that protect wildlands & wildlife - Constructed of 5052 alloy - Includes two stainless bolts for installation - Weight: 57 g (2 oz) - Lifetime PDWarranty