Parts & Accessories

$8.00
-Mounts easily to front racks with threaded M5 mounts
-Allows for unobstructed light positioning
-22.2mm clamping diameter

$5.00
The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
- TL 5.0 SL

$40.00
The Bar Fly 4 MTB is our mountain bike inspired mount made specifically for MTB, CX, and riders looking for a ‘top of the stem’ mounting solution. BF4 MTB mounts on right side of the stem and faces back over the stem. #BF4MTB-182
Modular system mounts a computer or GoPro base on top only. Compatible with 31.8mm and 35.0mm handlebars.
Included in Box:
BF4 MTB mount with hardware
7 Computer heads:
Garmin, Polar, Wahoo, Mio, Joule, Cateye, Bryton
GoPro base
Light mount
Shim for 31.8 handlebars
Computer compatibility:
Garmin Edge Series 200, 500, 510, 520, 800, 810, 820, 1000, 1030, Touring
Watches 910XT, 920XT
Polar M450, M460, V650
Wahoo ELEMNT and BOLT
Mio 500, 505, 505HC
Cyclo 200, 205HC, 210, 315HC, 400, 405, 405HC, 505HC, 605HC
Magellan 315, 505
Powertap Joule
Cateye Wireless models Padrone, Strada, Micro, Velo
Bryton 100, 300, 310, 330, 530, 10, One, 410
Lezyne Micro, Mirco C, Mini, Macro, Super and SuperSE (Lezyne computer head is not included with BF4 mounts but is available for purchase)

$10.00
The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory.

$10.00
Replacement bar mount for Urban lights with thumb screw for quick removal. Has a quick release design allowing the mount to quickly separate from the light. Compatible with all model year Urban lights.
- Includes mount, strap, allen key, and bolt

$10.00
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for their flagship tail light, the Sentinel. It allows you to fine tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It’s an easy-on and easy-off non-slip tail light mount that also features a grooved contact pad that makes this the ‘go-to’ mount for riders using aero seatposts.
- Fits standard and aero seatposts
System Compatibility:
- Sentinel
- Solas
- Sabre
- CherryBomb

$10.00
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended.
System Compatibility:
- Lumina Series
- Mako Series
- MiNewt Cordless Series

$20.00
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura.
- Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.)
- Lightweight and rustproof alloy construction
- New LW-Clamp reduces weight 25 grams compared to previous models
- Aluminum bar is position adjustable and uses Hex Bolt to install and remove
- 22mm-29mm diameter

$5.00
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works.
- Compatible with all PDW rear lights except the Asteroid and Fenderbot
- Horizontal holes are 50mm apart to fit European rack standards
- Vertical holes are 18mm apart to fit most reflector mounts
$15.00
The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light!
System Compatibility
- Lumina Series
- MiNewt Mini Series
- Mako Series

$13.00
This mount is designed to securely attach your Light and Motion Seca, Vega, or Stella headlight (sold separately) to your helmet. With a helmet mount, the light is always pointing where you're looking.

$10.00
This mount securely attaches your Light and Motion Vis 180 Micro taillight to a standard rear bicycle rack (taillights and racks sold separately).

$2.20
Need to replace a strap on the compact Vis 180 Pro taillight or the front mount of the Vis 360 Pro? This is a durable direct replacement that installs in seconds and can be cut to the preferred length.

$10.00
Setup a light wherever you can connect a GoPro mount. Use this adapter to connect your Taz to any GoPro mounting option.

$5.00
- Attaches to rear racks
- Compatible with: Blinky 3,5,7 and Superflash
- 25mm between each of the top horizontal holes (center to center)
- Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

$10.00
All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm.
SYSTEM COMPATIBILITY
- Lumina Series
- MiNewt Cordless Series
- Mako Series
WARRANTY
- This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)

$6.00
Replacement Part – Aero Tail Light Bracket
- Works For Both Headlight & Tail Lights
- Great For Helmet Application
- 3 Strap Sizes Allows Fitting From 20mm To Over 100mm
- Adjusts To Fit Aero & Round Seat Posts & Handlebars
Compatible With:
TST-70
TST-100
TST-150
TBT-50R
TBT-120F

$15.00
Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns.
System Compatibility:
- Lumina Series
- MiNewt Mini Series
- Mako Series

$4.00
The NiteRider Sentry Aero 260 Oversized XXL Aero Seat Post Strap provides a mounting option for a proper and correct fitment onto larger aero seat posts, commonly seen with popular TT Aero Road Bikes. Installation is easy with the loop around and hook design.
- Includes: (1) Oversized XXL Aero Seat Post Strap
- Compatibility Sentry Aero 260 Daylight Visible Tail Light only
- Oversized Aero Strap Length, 7.25" length with comfortable stretch to 9" length
- Fits 30.9 or 31.6mm diameter seat posts

$30.00
- The Gino Light Mount is a small perch that allows lights to be mounted to any M5 threaded eyelet, rack mount or braze-on
- Made in USA

$6.00
The NiteRider Sentry Aero 260 Standard and Aero Seat Post Straps provide options for a proper and correct fitment onto standard and aero seat posts. Installation is easy with the loop around and hook design.
- System compatibility: Sentry Aero 260 Daylight Visible Tail Light only
- Includes: (1) Standard Seat Post Strap, (1) Aero Seat Post Strap
- Standard Strap: 3.625" length with comfortable stretch to 5.5" length, fits 27.2mm seat post
- Aero Strap: 5.5" length with comfortable stretch to 9" length, fits 30.9 or 31.6mm seat post

$4.00
Click USB Mounting Strap
Compatible with:
- Click USB Front Light
- Click USB Rear Light
- Click USB Front & Rear Light Set

$65.00
Optimize your comfort and riding position on the Turbo Vado with this sleek stem. It's made from lightweight and durable 6061 aluminum, and it features both an integrated display and light mount. This way, you're able to dial in your fit without losing any of the readily accessible functionality or illumination that you love from the Vado.

$6.00
Replacement Part – Multi Sport Headlight & Tail Light Bracket
- Works for both headlights & tail lights
- Great for helmet application
- 3 strap sizes allows fitting from 20mm to over 100mm
- Adjusts to fit aero & round seat posts & handlebars
- For lights up to 120 grams in weight
- Cannot be used with: TST-70, TST-100, TST-150, TBT-50R, TBT-120F, USL-200, USL-250, USL-450, USL-500

$10.00
This mount is designed to securely attach your Light and Motion Vis 180 Micro taillight to your bicycle.

$20.00
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura.
- Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.)
- Lightweight and rustproof alloy construction
- New LW-Clamp reduces weight 25 grams compared to previous models
- Aluminum bar is position adjustable and uses Hex Bolt to install and remove
- 27mm-35mm diameter

$8.00
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seatposts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it’s time for a recharge.
Page 1 of 2
Next page