Parts & Accessories

To avoid chafe marks on the handlebars, you can simply re-order these foam pads as a set of 5. CONTENT: - 5x distance pads, grey

Whether you're traveling by bike or foot, with the lightweight Carrying System your pannier can accompany you on both. When worn, the Carrying System ergonomically adjusts to your back, allowing air to circulate comfortably and keep sweat at bay. When not in use, the Carrying System can simply be rolled up lengthways and stowed inside your pannier without taking up much space. To attach the Carrying System to your pannier, hook the top loops into the pannier's Quick-Lock hooks, and snap the buckles into the base edge protectors of your bag. Additional load control belts even make bags with auxiliary fasteners easy to carry. - Compatible with all panniers with QL1, QL2 and QL2.1 and lower edge protection. - Handle - Small pack size - Minimal weight - Chest strap - Reflective thread on the straps

Mounting set with cable fixing for ORTLIEB handlebar bags and baskets with wide block. - Ideal for use with e-bike displays - Universal cord attachment - Reflective tape on front - Holder compatible with bags and baskets of other brands - Attention: not suitable for carbon handlebars

Multifunctional two part mounting support for light, speedometer, or e-bike display. They can be fixed individually or in pairs with the Ultimate 6 mounting system. They are height adjustable and alignment can be adjusted up or down to create additional space on the bar.

If you have unconventional handlebars (sold separately) but still want a bag with easy access when riding then pick up Ortlieb's Extension Mounting Set for the Ultimate5 handlebar bag (sold separately). It pushes the bag out front further than normal so you can still use your fun hand positions and enjoy the convenience of a handlebar bag.

Additional pivot bearing for flexible use of the Quick-Rack on a number of bikes. Do you wish to use a second bike with your Quick-Rack? That’s no problem at all because the additional pivot bearings allow you to swap quickly between your bikes.

Mounting set with cable fixing for ORTLIEB handlebar bags and baskets. - Ideal for use with second bike - Reflective tape on front - Universal cord mounting - Holder compatible with bags and baskets of other brands - Attention: not suitable for carbon handlebars

The Handlebar Mounting-Set QR gives you ONE single Mounting-Set to use flexibly on several bikes and is compatible with all of our handlebar bags. Mounting and removal takes no time at all, needs no tools or screws yet still withstands the conditions over bumpy and rough terrain. If you want to know which version of the ORTLIEB handlebar bag fits on which version of the mounting set, please see our chart. FURTHER PRACTICAL FEATURES - For handlebars with a diameter of up to 35 mm - Reflective tape on the front

For all models with the QL2.1 system. Inserts are available for the two upper 16-mm mounting hooks that come with the proven QL2.1 mounting system. The inserts allow you to securely attach your ORTLIEB pannier to virtually any bike rack with smaller tube sizes (16 mm). DETAILS (PER PANNIER): - 1 pair of 8-mm inserts - 1 pair of 10-mm inserts - 1 pair of 12-mm inserts

Ortlieb's Ultimate6 Mounting Set uses an integrated lock to secure your Ultimate6 bag (sold separately) to your bars. Additionally, the lid of the Classic, Plus and Pro models can also be locked. Whether you need one to mount the bag on a different bike or simply want spare parts for a long tour, the mounting set is an indispensable part of the Ultimate6 system.

The Mounting Set Toptube-Bag is not only included as standard with the Toptube-Bag but is also suitable for retrofitting the Fuel-Pack and other bags. One of the two rails is mounted directly on the bicycle, and the other on the bag you want to attach. By simply clicking in and out, you can use the bag flexibly. If there are no threaded eyelets available or you want to position the Mounting Set in a frame location where threaded eyelets are generally not present, there's no problem either - screwless mounting of the Mounting Set is also possible with the rubberized straps.

The Protective Cap Handlebar-Pack QR protects your handlebars from pressure or abrasion damage and also makes it possible to securely mount the pack on carbon handlebars. Simple press the caps onto the two contact surfaces of the mounting set and you can fasten the mounting set or the Handlebar-Pack QR as usual.

Models with the QL1 system from 2005; Models with the QL2 system. The right hook inserts allow you to securely attach your ORTLIEB pannier with its proven QL1 or QL2 mounting system (16 mm) to virtually any bike rack. - 2 inserts measuring 8 mm - 2 inserts measuring 11 mm

For all models with the QL2.1 system. If your mounting system-s lower anchoring hook is lost or worn, you can easily replace it with a new anchoring hook. DETAILS: - 1 anchoring hook and mounting screw

For all models with the QL2.1 system, except for: Office-Bag, Commuter-Bag, Commuter-Bag Two and Downtown Two Worn, broken or lost mounting hooks? Replace your QL2.1 hooks with a new set of QL2.1 hooks and plastic handle. If the new hooks are too loose on your bike rack, use the appropriate hook inserts for a snug fit. - 2 QL2.1 hooks (16 mm) with plastic handle - 1 pair each of hook inserts in sizes 8 mm, 10 mm and 12 mm

You want a bicycle pannier with a simple QL3.1 system, but your bike rack isn't outfitted with QL3.1 studs? No problem! The Mounting-Set allows you to conveniently attach your QL3.1 pannier to virtually any commercially available bike rack with a tube diameter of up to 10 mm. Simply attach the QL3.1 Mounting-Set to your bike rack, and you-re off to your next destination! - 1 QL3.1 Mounting-Set, including mounting screws and inserts for bike-rack tube diameters of up to 10 mm

For all models, including the Back-Roller and Sport-Roller, with Stealth buckles Need to replace a pair of broken buckle? - 2 plastic buckles (male and female ends, 25 mm, black)

Replacement wire cord for your Handlebar Mounting Set. If the mounting wire for your handlebar adapter is defective, you can find the right spare part here. Contents - 1x wire cord with a length of 105 cm in black

This mounting set allows you to attach your Saddle-Bags to other bicycles. For all Saddle-Bag, MudRacer and Micro models. - 1 mounting set for Saddle-Bags, including screws

The shoulder strap for your Ultimate Compact, Bike-Box, E-Glow, E-Mate, Velo-Shopper, Trunk-Bag RC or Bike-Tourer is just what you need to carry on once you reach your destination. CONTENT: - 1 shoulder strap with plastic pad

Universal shoulder strap for ORTLIEB bags. Includes D-rings, plastic shoulder pad and carabiners. For Bike-Packer and Sport-Packer models from 2009 and for all Back-Roller City, Sport-Roller City and Gravel-Pack models. DETAILS: - 1 shoulder strap with carabiners

For all models from 1999 Need to replace a defective buckle? DETAILS: - 1 plastic, side-release buckle

What should you do with all those small, but important extras on your bikepacking tour? The best place to put your snacks, smartphone, rain slicker, and other items is in your ORTLIEB Accessory-Pack. This convenient volume expander for your Handlebar-Pack keeps your things secure, absolutely waterproof, and quickly accessible at all times. Use the metal hooks to securely attach the Accessory-Pack to the four points of attachment on the Handlebar-Pack. And if you don't plan on spending the night outdoors and don't need your Handlebar-Pack, you can still use your Accessory-Pack as a handlebar bag thanks to its pre-mounted Velcro straps. You can even use the carrying strap to transform the lightweight bag into a shoulder or hip bag.

If you use an ORTLIEB Back-Roller, Bike-Packer, or Velo-Shopper for your ride to work, you may want to consider the advantages of the Commuter Insert. You pack the Commuter Insert at home – with your laptop, lunchbox, documents, water bottle, pens, smartphone, change of shoes, etc. – and then simply insert it into your pannier. The advantage is that everything stays well-organized, nothing goes mysteriously missing and nothing hides in the depths of your bag. And so you save time and avoid those nervous moments of uncertainty. While the Commuter Insert is ideal for commuters, it can also be a faithful companion to anyone who transports gear from any point A to any point B. The Commuter Insert is made of lightweight, durable nylon fabric. A padded compartment for your laptop or tablet is located directly under the handle. There is a separate pen compartment and two compartments for your smartphone and money, including an integrated key chain. The large inside compartment offers plenty of space for provisions and a change of clothes. FEATURES: - Stable and tip-resistant even when empty - Two side mounts for water bottles, etc. - Flat mesh pocket (ideal for a bike lock) - Foam padding on the sides and bottom - Ideal for use with all ORTLIEB Back-Rollers, Bike-Packers and Velo-Shoppers - Permits access to the inside pocket of your bike pannier

Many e-bike owners are well-acquainted with this problem: bags and baskets that can't be attached to the handlebar because the e-bike display is in the middle of the handlebar. The ORTLIEB E-Bike Mounting Set comes to your assistance without forcing you to relocate the display. The lockable adapter is mounted to the handlebars with the proven cable fastener. This gives you a theft-proof way of attaching your ORTLIEB handlebar bags and baskets despite the display. The fastener is made for attachments of up to 5 kg. - suitable for all handlebar diameters up to 35 mm - duplicate set of keys - mount compatible with products by Rixen&Kaul (KLICKfix System) - bags can be locked to the handlebar with the integrated lock - additional safety in traffic thanks to the reflective material on the mount block

The integrable mesh inner pocket with zipper for the Handlebar-Pack QR. For all small items, such as wallet, snacks, cell phone or keys.

The name of the game is finding instead of searching. The Packing Cubes save you a lot of time and frustration when it comes to packing for your bike tour. The Cubes offer an ideally organized space for your clothing, tools, toiletries, and other gear. The system was specially designed for those mission-critical little things that often slip down into the depths of your panniers or otherwise defy your earnest search efforts. The inserts also help you to keep clean and soiled things separate. The three inserts (two 6-liter units and one 5-liter unit) can be perfectly stacked in ORTLIEB Back-Rollers, Velo-Shoppers, and Bike-Packers. The durable, lightweight nylon material was specially developed to ensure a long service life. All of the Cubes are outfitted with a practical 2-way zipper to ensure easy access to their contents. Outfitted with top handles, the inserts are easy to remove from your panniers. Each Cube has additional inside and outside mesh pockets for stowing those very small objects you would like to have within reach. Given their modular design, the bags can also be used individually when you're out on short trips. FEATURES: - Each unit in the modular system can also be used individually - Volume of organizers: top and middle bag: each 6 L, lower bag: 5 L - Suitable as an insert for all ORTLIEB Back-Rollers, Bike-Packers and Velo-Shoppers

For all models with the QL1 system from 1993. Worn, broken or lost QL1 mounting hooks? No problem! Simply replace the hooks with a new set of QL1 hooks and adjustable handle. If the new hooks are too loose on your bike rack, use the appropriate hook inserts for a snug fit. - 2 QL1 hooks (16 mm) and adjustable handle - 1 pair each of hook inserts in sizes 8 mm and 11 mm

For all models with the QL2 or QL2.1 system. If the standard mounting hooks are too small to fit on the tubes of your bike rack, simply replace the standard hooks with a set of 18-mm ORTLIEB hooks (cannot be used with inserts). - 2 QL2.1 mounting hooks (18 mm) and adjustable handle

For all models with the QL2 or QL2.1 system. If the standard mounting hooks are too small to fit on the tubes of your bike rack, simply replace the standard hooks with a set of 20-mm ORTLIEB hooks (cannot be used with inserts). DETAILS: - 2 QL2.1 snap hooks (20 mm) with adjustable handle