Tools/Maintenance

- Incredibly compact torque wrench with adjustable range from 2-10Nm - Reversible ratcheting head - Includes a 5 bit storage compartment that attaches to the wrench for storage - Also includes the following hex bits 3 4 5 and T20 and T25 Torx bits - P

Torq Stick Torque Wrech - Pull & rotate to select your target torque value - Audible signal: Torque wrench clicks when preset torque is reached - Storage pen integrated with tool holder snaps to hold the Ratchet Stick together for riding or storage - Turn the ratchet wheel to tighten or loosen mounting bolt - 3, 4, 5 Allen bits, T20, T25 Torx bits included - Material: aluminum and engineering grade polymer body, hardened steel ratchet, S2 hardened steel bits

The BKD-1.2 Hydraulic Brake Bleed Kit will bleed most models of DOT fluid-based hydraulic disc brakes, including models made by SRAM®, Formula®, Hayes®, and Hope®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance. The BKD-1.2 is built for the rigors of daily commercial use and includes two syringes, hoses with shutoff clips, multi-size bleed blocks, and a set of our unique mountable syringe holders, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case. Includes: - Two 20 mL syringes Two hose assemblies with shutoff clips - Two 10 mm/12 mm universal bleed blocks - Two 11 mm bleed blocks for Hayes® systems -  Two adjustable syringe holders -  M5 x 0.8 adapters— SRAM® (x2) -  M6 x 1.0 adapter— universal (x2) - Bleeding Edge-specific fitting — SRAM® -  Hose compression sleeve — universal -  Set of spare O-rings and hose -  Replacement parts available -  Brake fluid not included NOTE: The BKD-1.2 is for DOT fluid-based hydraulic bicycle brake systems only. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure. For mineral oil brake systems use the Park Tool BKM-1.2 Hydraulic Brake Bleed Kit — Mineral Oil.

Designed and built specifically for a wide variety of bicycle Torx compatible work, the THT-1 is a set of eight common sizes of professional quality T-Handle star-shaped wrenches built for speed, efficiency, leverage and a perfect fit. Soon to become your favorite Torx compatible set, the THT-1 includes a handy tool holder that mounts to any vertical surface, including pegboard and solid surfaces (fasteners not included). - Carefully selected combination of Chrome Vanadium and S-2 tool steels - T6, T8, T10, T15, T20, T25, T30 and T40 Torx compatible wrenches included - Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless - Sliding T-handle creates increased leverage and multiple access positions - Tool holder is included with the set and mounts to any wall, bench or tool box, perfectly positioning each wrench for easy access and storage

With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The TW-6.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). Designed for higher torque settings for repairs and installation in the bottom bracket, cassette lockring and other areas that use a higher torque settings. For lower torque setting, see the TW-5. Comes with its own protective case. - 10–60 Newton meter range (88–530 Inch Pounds) - Adjustable in 0.25 Nm increments - Ratcheting 3/8" drive - Reads and registers for both left hand and right hand threading - Dial-adjust system allows desired torque setting to be preset - Calibrated to be accurate to +/- 4% - Length: 36.2cm (14.25")

No more need to hold wheels between your knees, balance on a bench top or ask for help. The WH-1 Wheel Holder firmly holds thru axle and quick release wheels at three convenient positions. It’s like having a strong helper to hold wheels during cleaning, tire and tube work, hub work, cassette work, and tubeless installation. The WH-1 can be bolted or clamped directly to a bench or installed in a bench vise. Uses and Features: - Quick and easy access to hold virtually any wheel to perfectly position your work for a variety of tasks including but not limited to: - Wheel building -Cassette removal and installation - Tire and tube removal and installation - Tubeless tire work - General cleaning - Hub work - Holds wheel at vertical, 35 degrees from vertical, and horizontal positions - Accepts 12, 15, and 20mm thru axles and 5mm skewers - E-Nickel finish for durability

An alignment gauge is essential for diagnosing and repairing bent or misaligned derailleur hangers, often the source of shifting problems. The DAG-3 features an all-new design, engineered and built to be light, accurate, and versatile. The sliding indicator can measure derailleur hanger alignment against bicycle rims of any size and rotates out of the way to clear seat stays, racks, and other obstacles, allowing 360-degree measurement. The long, precision-extruded aluminum body is built to exacting tolerances and provides ample leverage for making adjustments. - Compatible with 16" to 29"+ wheels (ISO/ETRTO rim sizes from 317 to 630+) - Replaceable M10 threaded tip - Low-profile head fits low clearance thru-axle derailleur hangers and Shimano Direct Mount hangers - Length: 16.5" (420mm) - Weight: 22.75 oz. (645g)

- Pro bleed kit for mineral oil brakes - Includes 2 syringes/2 M4 fittings, bleed block, Torx tool, crowfoot

The CRS-15.2 uses two different insert rings to install bearing races on the 1.5-inch and 1-1/4-inch forks. The bearing surface is spared a direct hit by using aluminum inserts. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. Included extension allows work on fork steering tubes up to 425mm. - SHIS terminology: The CRS-15 services crown races in SHIS 33 and 40.

• High quality precision tool; A must for the serious dealer / cyclist! • Adjustability from 3 to 15 Nm; for all stems / handlebars / seatposts etc • Incl. M3, M4, M5, M6, T25 & T30 Chrome Vanadium sockets and extension • Small and easy to use incl. storage-box

Roughly 70% of damage to high-end carbon components like seat posts, handlebars, and stems happen when making adjustments without using torque measurement. This problem is accentuated by the majority of adjustments occurring on the roadside or trail-side. T-Ratchet + Ti-Torque solves these problems by delivering a highly ergonomic tool with a torque measuring extender that provides real-time feedback as you are tightening the fastener. The Ti-Torque beam has three separate scales on it, 2-6, 3-5, and 4-8, which allow you to easily see when you've reached your desired torque setting. Ti-Torque weighs in at a mere 30 grams meaning you'll hardly notice it's there until you need it. The T-Ratchet uses interchangeable magnetic components to convert from a screwdriver to a ratchet, to a ratcheting T-Handle in seconds, which gives the user the ability to have several tools at once in an extremely small package. - Ti-Torque beam with three separate scales for measuring 2-8Nm - Precision ratchet with convertible magnetic extension - Steel bit extender - S2 steel Hex bits: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm - S2 steel Torx bits: T10, T20, T25 - S2 steel 2mm Phillips head bit - Duck-waxed canvas carrying case measuring 120mm x 70mm x 30mm - Kit weight: 220 grams

- Incredibly compact torque wrench with adjustable range from 2-10Nm - Reversible ratcheting head - Includes a 5 bit storage compartment that attaches to the wrench for storage - Also includes the following hex bits 3 4 5 and T20 and T25 Torx bits - P

Improperly aligned frame or fork dropouts can cause bent axles and quick-release skewers, as well as tracking and shifting problems. The Frame and Fork End Alignment Gauge Set quickly determines whether the frame or fork dropouts are aligned and parallel. If an error is detected, long handles and comfortable molded grips afford plenty of leverage for straightening. These Park gauges adjust to compensate for various hub widths from 100mm to 160mm, too.

Includes a new tray/motor shroud, USB ports and oversized buttons to upgrade a Park Tool PRS-33 or PRS-33 AOK into the PRS-33.2 version controls and electronics.

A versatile and convenient way to keep tools, supplies and technology at arms length on a PRS-33 Power Lift Repair Stand. The PRS-33TT solidly mounts directly to either side of the stand’s upright at any height. - 19 tool holding holes, slots and small trays in a variety of shapes and sizes - 14-inch (35cm) magnetic tool bar - Integrated mounting holes for PTH-1 Paper Towel Holder - Phone/tablet/clipboard holder - Pen and pencil holders - Adjustable utility hook to hang wheels, parts and scales - Height adjustable - Can be installed on a fully assembled stand

A complete tool set to work on both Campagnolo and Fulcrum Ultra-Torque and Power Torque crank and bottom bracket systems (each sold separately). The CBP-8 includes a beefed-up bearing and crank puller and all the fittings necessary to remove and install both systems. - Bearing Puller That Fits Both Power Torque And Ultra-Torque - Crank Puller For Power Torque - Bearing Setter For Both Power Torque And Ultra-Torque - Removal Adaptor For Power Torque Crank Bearings - Removal Protection Pads For Use With Carbon Cranks - Removal Protection Adaptor For Use With Aluminum Crank Arms - Crank Removal Extension Plug For Power Torque

The key to wheels that are strong and reliable is having spokes that are properly and uniformly tensioned. Park's Spoke Tension Meter accurately and reliably measures the absolute tension of each of the spokes in a wheel, as well as the relative tension between all the spokes in a wheel. It's easy to use, affordable and it works on nearly any bicycle spoke, no matter its diameter, material or shape.

Park Shop Cone Wrenches are made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on hubs and other bearing assemblies. Their special Y-heads put more material where it's needed for greater strength. Most applications require several cone wrenches, so Park gives you a whole set, featuring 13mm - 24mm, 26mm and 28mm wrenches to suit your repair needs.

Designed and built with the specific needs of the bike mechanic in mind. The RP-SET.2 includes five professional quality pliers for internal snap rings and one for external snap rings. Pliers are made from forged, heat treated cro-moly steel with a return spring and vinyl dipped grips. RP-1: .9mm straight internal. Opens from 22mm down to 0 (tips touching) RP-2: 1.3mm bent internal. Opens from 22mm down to 2mm (center to center) RP-3: 1.3mm bent external. Opens from 2mm (center to center) up to 18mm RP-4: 1.7mm bent internal. Opens from 21mm down to 2mm (center to center) RP-5: 1.7mm straight internal; Opens from 25mm down to 0 (tips touching)

The all-new Range Torque Wrench + Ratchet Wrench Combo simplifies proper bike maintenance by combining the precision of a bar-style torque wrench and speed of 2-way ratchet wrench in a compact, lightweight and portable package. There’s no need to set a specific indexed torque, or go searching for missing bits – select your bit from the case’s labeled inserts, ratchet for quick thread engagement and use the torque head to match manufacturer specifications for torque. - Ratchet wrench for speed; torque wrench for precision - Portable and light – fits in a ride pack or travel-transport - Infinite torque capabilities within the 2-10Nm range - 2-way ratchet wrench protects the integrity of torque wrench function - 6-degree ratchet engagement maneuvers in tight spaces - Torque validation for “bolt-checks” on any bicycle components - Compact head and bit design allows clearance and full function in tight spaces - 14 labeled S2 Steel* allen key, torx bit, and Phillips head bits covering the most common bicycle applications - #2 Philips; Torx: T10 , T20, T25, T30; Hex: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm; - Extended length: 5mm Hex & T25 Torx - User ‘zero’ ensures accuracy of the torque bar for every use - 3rd-party tested and validated for accuracy and longevity (exceeds ISO standard) *S2 Steel is industry-leading tool steel for precision edges and durability

One of the first things you notice in the toolboxes of top-level motorsport or Pro-Tour mechanics is extremely high-quality hex keys. The reasoning is simple; better tool fit leads to better feel and confidence for the mechanic as well as a significant reduction in the likelihood of damaging exotic fasteners made from titanium or aluminum. For the HX-ONE, we use the finest S2 tool steel; shock-resistant steel which has been refined by toolmakers for the optimal balance of strength, hardness, shock resistance, and dimensional control. The keys are then coated with thin-dense chrome and a high-grip, high-visibility textured polymer finish for maximum grip and control. Included with the HX-One Home Essential Kit is the proprietary SILCA 17-4 Stainless Magnetic Adapter. The adapter turns the 6mm hex key into a 1/4" bit driver. - Fully CNC-machined beechwood box with magnetic closure - S2 steel hex keys: 2, 2.5, 3, 4, 5, 6, 8 and 10mm - Red polymer coating for superior grip on hex keys - Custom S2 stainless steel bit adaptor: 6mm to standard 1/4" bit - S2 steel Torx bits: T8, T10, T15, T20, T25, and T30 - S2 steel Screw bits: PH1, PH2, SL4, and SL5

Quickly, safely and easily set your crown race with Park's CRS-1 Crown Race Setting System. It includes 6 different inserts (3 for 1-inch and 3 for 1-1/8-inch steerer tubes) that ensure full contact with the crown race for precision installation.

Never be left looking for an errant wrench when you have Park's Metric Wrench Set. It includes 12 high quality Park metric wrenches from 6 to 17mm in diameter, featuring both box and open ends. They are all forged from chrome vanadium steel, then chrome plated for durability and dipped in Park Tool blue vinyl for outstanding comfort and ease of use.

SRAM Bleed Kit for maintaining SRAM disc brakes. Includes 2 syringes/fittings, bleed blocks, Torx tool, Crow's foot, and Bleeding Edge Fitting. - For SRAM X0/ XX/ Guide/Level/Code/HydroR brakes - Improved sealing and durability - New rotating metal hose fittings - High volume hose with clamp - Longer lasting - Must-have for all mechanics - NOT compatible with RockShox fork bleed kit - Brake fluid sold separately

The Topeak Ratchet Rocket Lite NTX+ has everything you need to fix and make precise adjustments to your bike while on the road. Featuring a fine-tooth ratchet mechanism with reverse lever and thumb wheel with adjustable torque TorqBit for ease and accuracy in tight spots. Includes magnetic bit holder, hardened steel tools in 2, 2.5, 3, 4, 5, 6 and 8mm hex, T10, T15, T25 Torx, #2 Phillips bits and CrMo steel chain tool. The protective case keeps things organized and secure, and even has a pocket to carry glueless patches. - Functions: 19 - Ratchet tool material: Chrome vanadium steel - Bag: Nylon - Added features: Screwdriver, Secondary chain link fence, Chain pin breaker, Leverage added, Patch pocket, Magnetic bit holder - Size: 13 x 6.5 x 3.3cm - Weight: 240 g / 8.46-oz Tools: - Adjustable torque TorqBit : 2 - 6Nm - Allen bits - 2 / 2.5 / 3 / 4 / 5 / 6 / 8mm - Torx bits - T10 / T15 / T25 - #2 Phillips screw driver, CrMo steel chain tool*, Ratchet tool * The chain tool is compatible with single and multi-speed chains up to 12 speed, NOT including Campagnolo hollow pin chains.

Simple and economical, Park's Home Mechanic Bearing Cup Press is the perfect addition to your toolbox. With a few quick twists it easily installs all sizes of headset cups and one-piece bottom bracket cups.

Engineered for fit, function, and leverage, these L-shaped shop-quality hex wrenches are a must have for every workshop. - High-torque, industrial steel wrenches - Straight hex shaft on the short side, ball end on the long side - Includes 2, 2.5, 3, 4, 5, 6, 8, and 10mm - Comfortable, ergonomically designed nylon handles fit perfectly in your hand - Durable wall/pegboard mount tool holder allows easy access and organization

With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The Park Tool TW-5.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). With a range of 2-14Nm, the TW-5.2 is designed for the lower torque settings that a shop or consumer would use for proper seat post, seat clamp and handlebar / stem applications. Comes with its own protective case.

Park Tool's Frame and Fork Straightener is a versatile and productive tool. Its open hook design enables it to straighten not only frames and forks, but also cranks and handlebars and it features vinyl coating on the hook and fulcrum pad to protect painted surfaces. The FFS-2's hook offers 8 inches of fore-aft adjustment and can fit a frame or fork tube of up to 1-3/4 inches in diameter.

This handy tool will save time and frustration! Quickly and accurately cuts hydraulic brake line then precisely installs hose barbs into the tubing when the brake line is either on or off the bike. - Cuts hydraulic brake hose (does not cut steel braided hydraulic hose) - Installs press-in style barbed hose inserts - Replaceable parts including push pin tip and stainless steel blade - Hard anodized body for improved tool wear - Lightweight, CNC machined aluminum body Replacement parts: - 2494K Cutting Blade (set of 2) - 2497 Push Pin Tip