Skip to main content

Our Showrooms Are Now Open: SEE HOW WE ARE OPERATING
Online Orders: CHECK ORDER STATUS ONLINE

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Lubes/Cleaners

Finish Line DOT 5.1 Brake Fluid (4-Ounce Bottle)
$9.00
Finish Line's DOT 5.1 Brake Fluid is a high-quality fluid for maximum life and braking power. It exceeds the most stringent 5.1 specs and is compatible/mixable with all DOT 3, 4 or 5.1 spec'd systems. It also features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.
Finish Line E-Bike Cleaner
$8.00
E-Bike Cleaner is formulated to remove grit and grime from frames, wheels and components of e-Bikes. To ensure a clean e-Bike while not damaging expensive electronic components, Finish Line engineered a clinging foam cleaner that is gentle, noncaustic, leaves no streaks, and requires no water rinsing. Finish Line’s e-Bike Cleaner is an ideal complement to any dealer specializing in e-bike sales and service.
Finish Line E-Bike Lube
$12.00
E-Bike Chain Lube is designed to handle the unique requirements of electronic assist bicycles. E-Bike chains are exposed to higher torque and wattage loads. With this in mind, Finish Line engineered a light wet lube with unique extreme pressure additives to ensure that the lube stays within the premature wear and protecting against rust and corrosion. Finish Line’s E-Bike Chain Lube is an ideal complement to any dealer specializing in e-Bike sales and service.
Finish Line E-Shift Groupset Cleaner (16-Ounce Spray)
$15.00
Finish Line's E-Shift Groupset Cleaner is specially formulated to keep your sensitive and expensive electronic drivetrain clean and safe. It quickly and safely removes grit, grime and moisture from electric shifting drivetrain components, including the front and rear derailleur, derailleur pulleys, chain, cassette and even the crankset. E-Shift is safe and will not harm the wires or electronics. Plus, it dries in minutes leaving the drivetrain parts clean, and with no rinsing required.
Finish Line Ecotech Degreaser
$15.00
- A biodegradable degreaser that cuts through the toughest grime - Strong enough for the metal parts, Yet safe enough to clean parts with rubber o-rings and seals, urethane elastomers, and painted surfaces - Exceeds all federal V.O.C. and California carbon regulations - Law prohibits ORM-D materials from shipping by air
Finish Line Fiber Grip Assembly Gel
$8.00
Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.
Finish Line Speed Degreaser
$12.00
- A super duty cleaner that strips the toughest residues, Including brake rotor surface grime - Dries fast with no oily residue left behind - Exceeds all federal v.O.C. And california carb regulations - Law prohibits orm-D materials from shipping by air
Finish Line Super Bike Wash (1-Liter Bottle w/Sprayer)
$13.00
Finish Line's Super Bike Wash quickly cleans dirt, clay, road grime and chain gunk off your bike. Five different cleaning agents work together to create a high-speed cleaning system. Three different rust and oxidation inhibitors protect metal surfaces to prevent rusting. It's safe for all bike surfaces.
Finish Line Wet Lubricant
$10.00
For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime - Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.
Dumonde Tech Dumonde Lite BCL Lube 2oz
$12.00
Our standard LITE chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces. “Riding in” forms an extremely low-friction plating. Plating bonds to chain; can’t be washed off! Components stay cleaner, last longer, run quieter. Extremely durable, outlasts all other chain lubes! Environmentally sensitive and saves money. To be applied sparingly unlike many other other lubes. Lite and Original Bicycle Chain Lube (BCL) differ only in their concentration. Lite BCL is less concentrated for easier application and optimum performance. We recommend the Lite Bicycle Chain Lube for road bikes. You can confidently use Dumonde Tech’s Bicycle Chain Lubes on all cables, pivots points and seals. Safe on plastic, rubber and all seal materials. The product is designed to not harm your components. Eco-friendly and environmentally sensitive, our products are engineered to perform with minimal “carbon footprint” by not washing off in water, to use sparingly, lasts longer between applications, your drive train lasts longer. Very good performer in the extreme cold conditions. Preparation and Application of Dumonde Tech Lite Chain Lube: To prepare for maximum performance from Dumonde Tech Lite Chain Lube, use a high quality solvent, for example Dumonde Tech Citrus Solvent, to thoroughly clean and dry the chain before the first application. You will only need to clean the chain once, prior to the first application of Lite. For optimum performance, 2-3 applications is required for the bonding process to occur through polymerization. Apply sparingly and wipe off excess lubricant with a clean cloth to the point where the chain’s outer surface appears dry. One ounce of Dumonde Tech should give you at least 10 applications. Refer to FAQ if you experience a wet and/or dirty chain after riding. Re-apply Dumonde Tech Lite only when you begin to hear your chain; sound, not appearance or time, is the best indicator of when the chain needs a reapplication of Lite. Use mild soap and water to clean between applications. NOTE: Not available for Export. Cannot be shipped via air.
Dumonde Tech Dumonde Original BCL Lube 1oz
$8.00
**Same great formula as the 2oz, but only in a 1oz bottle!** Our standard ORIGINAL chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces. “Riding in” forms an extremely low-friction plating. Plating bonds to chain; can’t be washed off! Components stay cleaner, last longer, run quieter. Extremely durable, outlasts all other chain lubes! Environmentally sensitive and saves money. To be applied sparingly unlike many other other lubes. Lite and Original Bicycle Chain Lube (BCL) differ only in their concentration. Original BCL is more concentrated for exceptional durability under the most challenging conditions. The two formulas are compatible and may be used interchangeably. We recommend the Original Bicycle Chain Lube for mountain bike, cyclo-cross and more extreme conditions. You can confidently use Dumonde Tech’s Bicycle Chain Lube on all cables, pivots points, seals. Safe on plastic, rubber, all seal materials. The product is designed to not harm your components. Eco-friendly and environmentally sensitive, our products are engineered to perform with minimal “carbon footprint” by not washing off in water, to use sparingly, lasts longer between applications, your drive train lasts longer. Very good performer in the extreme cold conditions.. Preparation and Application of Dumonde Tech Original Chain Lube: To prepare for maximum performance from Dumonde Tech Original Chain Lube, use a high quality solvent, for example Dumonde Tech Citrus Solvent, to thoroughly clean and dry the chain before the first application. You will only need to clean the chain once, prior to the first application of Original. For optimum performance, 2-3 applications is required for the bonding process to occur through polymerization. Apply sparingly and wipe off excess lubricant with a clean cloth to the point where the chain’s outer surface appears dry. One ounce of Dumonde Tech should give you at least 10 applications. Refer to FAQ if you experience a wet and/or dirty chain after riding. Re-apply Dumonde Tech Original only when you begin to hear your chain; sound, not appearance or time, is the best indicator of when the chain needs a reapplication of Original. Use mild soap and water to clean between applications. NOTE: Not available for Export. Cannot be shipped via air.
Dumonde Tech Dumonde Original BCL Lube 2oz
$12.00
Our standard ORIGINAL chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces. “Riding in” forms an extremely low-friction plating. Plating bonds to chain; can’t be washed off! Components stay cleaner, last longer, run quieter. Extremely durable, outlasts all other chain lubes! Environmentally sensitive and saves money. To be applied sparingly unlike many other other lubes. Lite and Original Bicycle Chain Lube (BCL) differ only in their concentration. Original BCL is more concentrated for exceptional durability under the most challenging conditions. The two formulas are compatible and may be used interchangeably. We recommend the Original Bicycle Chain Lube for mountain bike, cyclo-cross and more extreme conditions. You can confidently use Dumonde Tech’s Bicycle Chain Lube on all cables, pivots points, seals. Safe on plastic, rubber, all seal materials. The product is designed to not harm your components. Eco-friendly and environmentally sensitive, our products are engineered to perform with minimal “carbon footprint” by not washing off in water, to use sparingly, lasts longer between applications, your drive train lasts longer. Very good performer in the extreme cold conditions.. Preparation and Application of Dumonde Tech Original Chain Lube: To prepare for maximum performance from Dumonde Tech Original Chain Lube, use a high quality solvent, for example Dumonde Tech Citrus Solvent, to thoroughly clean and dry the chain before the first application. You will only need to clean the chain once, prior to the first application of Original. For optimum performance, 2-3 applications is required for the bonding process to occur through polymerization. Apply sparingly and wipe off excess lubricant with a clean cloth to the point where the chain’s outer surface appears dry. One ounce of Dumonde Tech should give you at least 10 applications. Refer to FAQ if you experience a wet and/or dirty chain after riding. Re-apply Dumonde Tech Original only when you begin to hear your chain; sound, not appearance or time, is the best indicator of when the chain needs a reapplication of Original. Use mild soap and water to clean between applications. NOTE: Not available for Export. Cannot be shipped via air.
Dumonde Tech Freehub Oil, 1oz
$12.00
Our Standard Freehub Oil is a great addition for the bicycle market and another superior product from Dumonde Tech. Freehub Oil is the original lubricant on the market specifically designed for Pawl style freehubs which require a lightweight lubricant. Freehub Oil performs consistently throughout a wide temperature range. “Flow Point” is -40 degrees, is extremely low friction, providing the greatest protection. Simply follow the manufacture’s specification for the volume of oil required in your freehub body to experience the superior performance of Dumonde Tech’s Freehub Oil. With Freehub Oil being lightweight, growing reports for other applications have been reported. It can be used as cable lube and brake lever lubricant for the small moving parts and the lightweight spring action they have. Time and cold temperatures do not affect the performance of Freehub Oil like with heavier viscosity, time and temperature aged greases. They become thicker and stickier as they age slowing down the parts action. PRO X Freehub Oil is Used, Sold, Endorsed and highly Recommended by Industry 9 “Torch” hubs, Project321 and Kappius Components. Note: Stan’s NoTube preference is our Freehub Grease which they are very pleased with. Used, Endorsed and Recommended: Pacenti Cycle Design, Profile Racing, Crank Brothers, Ritchey Design, Loaded and e*thirteen. Crossover applications: Cable lubricant.
Dumonde Tech HG Lube Needle Applicator
$8.00
Dumonde Tech Needle Lubricant Applicator Now you have a simple solution for all those hard to reach places! Derailleur and brake pivot points are now easy to lube....Simply screw on the applicator to you choice of Dumonde Tech Lube and your ready to go.
Dumonde Tech Lite BCL Lube 1oz
$8.00
**Same great formula as the 2oz, but only in a 1oz bottle!** Our standard LITE chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces. “Riding in” forms an extremely low-friction plating. Plating bonds to chain; can’t be washed off! Components stay cleaner, last longer, run quieter. Extremely durable, outlasts all other chain lubes! Environmentally sensitive and saves money. To be applied sparingly unlike many other other lubes. Lite and Original Bicycle Chain Lube (BCL) differ only in their concentration. Lite BCL is less concentrated for easier application and optimum performance. We recommend the Lite Bicycle Chain Lube for road bikes. You can confidently use Dumonde Tech’s Bicycle Chain Lubes on all cables, pivots points and seals. Safe on plastic, rubber and all seal materials. The product is designed to not harm your components. Eco-friendly and environmentally sensitive, our products are engineered to perform with minimal “carbon footprint” by not washing off in water, to use sparingly, lasts longer between applications, your drive train lasts longer. Very good performer in the extreme cold conditions. Preparation and Application of Dumonde Tech Lite Chain Lube: To prepare for maximum performance from Dumonde Tech Lite Chain Lube, use a high quality solvent, for example Dumonde Tech Citrus Solvent, to thoroughly clean and dry the chain before the first application. You will only need to clean the chain once, prior to the first application of Lite. For optimum performance, 2-3 applications is required for the bonding process to occur through polymerization. Apply sparingly and wipe off excess lubricant with a clean cloth to the point where the chain’s outer surface appears dry. One ounce of Dumonde Tech should give you at least 10 applications. Refer to FAQ if you experience a wet and/or dirty chain after riding. Re-apply Dumonde Tech Lite only when you begin to hear your chain; sound, not appearance or time, is the best indicator of when the chain needs a reapplication of Lite. Use mild soap and water to clean between applications. NOTE: Not available for Export. Cannot be shipped via air.
Boeshield T-9 Lubricant
$19.00
- Developed by the Boeing company for lubrication and protection of aircraft components - Dries to a thin waxy film that clings to metal for months - Law prohibits ORM-D materials from shipping by air
Avid DOT 5.1 Brake Fluid
$15.00
Keep your brakes performing at their best with Avid's DOT 5.1 Brake Fluid. They're compatible with all Avid disc brake seals. You'll get a 4-ounce bottle of fluid.
Avid DOT Assembly Grease
$11.00
Keep your brakes performing at their best with Avid's Assembly Grease. They're compatible with all Avid disc brake seals. You'll get a 1-ounce jar of grease.
A.T.B. Absolutely The Best (ATB) Chain Lube
$10.00
WHY A.T.B. LUBRICANT? Most commercial chain lubricants are too thick and too sticky to function properly as a bicycle chain lubricant. Dust and dirt collect on the sticky lubricants and create an abrasive condition which quickly wears out the chain, the chain rings, and sprockets. A.T.B. Chain lubricant was blended with the least oily, least sticky extreme pressure and friction reducing compound available. A very special blended petroleum distillate carrier (which has lubricating qualities as well) was used as the carrier for the extreme pressure compound. In addition to the two proprietary compounds, a premium grade lubricating oil with very high load carrying capability was added to extend the service life and create a light rust preventative film. A special wicking agent has been blended in to allow the deep penetrating action required.
Previous page Page 2 of 2