Lubes/Cleaners

Need to give your bike some quick attention before you head out the door? Give it a quick shot of Finish Line's 1-Step Cleaner And Lubricant. It loosens and removes grime, while at the same time laying down a thin layer of low-friction lube that reduces drivetrain noise and premature component wear. Keeping your bike running smooth has never been easier!

For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime - Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.

Specially formulated low-friction lubricant for the seals and bushings of the air chamber for front and rear Fox Racing Shox. Float Fluid is the recommended lube for use with Fox forks and shocks. - Use when rebuilding Fox suspension to lubricate foam rings and seals - Corrosion inhibitor

Bandanas are always good to have in the pack for clean-up, roll-up, wrap-up and cover-up! We made this bandana to share our all around bike pride with you. 100% Cotton printed with waterbased ink for a softer touch.

Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.

Keep your brakes performing at their best with Avid's Assembly Grease. They're compatible with all Avid disc brake seals. You'll get a 1-ounce jar of grease.

**Same great formula as the 2oz, but only in a 1oz bottle!** Our standard ORIGINAL chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces. “Riding in” forms an extremely low-friction plating. Plating bonds to chain; can’t be washed off! Components stay cleaner, last longer, run quieter. Extremely durable, outlasts all other chain lubes! Environmentally sensitive and saves money. To be applied sparingly unlike many other other lubes. Lite and Original Bicycle Chain Lube (BCL) differ only in their concentration. Original BCL is more concentrated for exceptional durability under the most challenging conditions. The two formulas are compatible and may be used interchangeably. We recommend the Original Bicycle Chain Lube for mountain bike, cyclo-cross and more extreme conditions. You can confidently use Dumonde Tech’s Bicycle Chain Lube on all cables, pivots points, seals. Safe on plastic, rubber, all seal materials. The product is designed to not harm your components. Eco-friendly and environmentally sensitive, our products are engineered to perform with minimal “carbon footprint” by not washing off in water, to use sparingly, lasts longer between applications, your drive train lasts longer. Very good performer in the extreme cold conditions.. Preparation and Application of Dumonde Tech Original Chain Lube: To prepare for maximum performance from Dumonde Tech Original Chain Lube, use a high quality solvent, for example Dumonde Tech Citrus Solvent, to thoroughly clean and dry the chain before the first application. You will only need to clean the chain once, prior to the first application of Original. For optimum performance, 2-3 applications is required for the bonding process to occur through polymerization. Apply sparingly and wipe off excess lubricant with a clean cloth to the point where the chain’s outer surface appears dry. One ounce of Dumonde Tech should give you at least 10 applications. Refer to FAQ if you experience a wet and/or dirty chain after riding. Re-apply Dumonde Tech Original only when you begin to hear your chain; sound, not appearance or time, is the best indicator of when the chain needs a reapplication of Original. Use mild soap and water to clean between applications. NOTE: Not available for Export. Cannot be shipped via air.

- Light viscosity oil for deep penetration with teflon for durability - Law prohibits orm-D materials from shipping by air

- Incredibly effective cleaning formula containing Nano Technology that also cares for your bike's delicate finishes - Contains no harmful acids, CFC's or solvents and is fully biodegradable - Cuts through dirt, oil and grime quickly and safely leaving your whole bike sparkling clean

- Developed by the Boeing company for lubrication and protection of aircraft components - Dries to a thin waxy film that clings to metal for months - Law prohibits ORM-D materials from shipping by air

Our Standard Freehub Oil is a great addition for the bicycle market and another superior product from Dumonde Tech. Freehub Oil is the original lubricant on the market specifically designed for Pawl style freehubs which require a lightweight lubricant. Freehub Oil performs consistently throughout a wide temperature range. “Flow Point” is -40 degrees, is extremely low friction, providing the greatest protection. Simply follow the manufacture’s specification for the volume of oil required in your freehub body to experience the superior performance of Dumonde Tech’s Freehub Oil. With Freehub Oil being lightweight, growing reports for other applications have been reported. It can be used as cable lube and brake lever lubricant for the small moving parts and the lightweight spring action they have. Time and cold temperatures do not affect the performance of Freehub Oil like with heavier viscosity, time and temperature aged greases. They become thicker and stickier as they age slowing down the parts action. PRO X Freehub Oil is Used, Sold, Endorsed and highly Recommended by Industry 9 “Torch” hubs, Project321 and Kappius Components. Note: Stan’s NoTube preference is our Freehub Grease which they are very pleased with. Used, Endorsed and Recommended: Pacenti Cycle Design, Profile Racing, Crank Brothers, Ritchey Design, Loaded and e*thirteen. Crossover applications: Cable lubricant.

Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.

DOT Disc Brake Assembly Grease is specially formulated for DOT-fluid brake systems. - Recommended for lever pistons, hose compression nuts, threaded barbs, and olives

Fox High Performance Synthetic Suspension Fluid keeps any fork or shock operating at its best. - High performance suspension fluid formulated to provide fade-free performance - Proprietary additive eliminates stiction, friction and wear, and protects against foaming, seal-swell, oxidation and corrosion - 10-weight Red formula

- Highly versatile dry weather chain lubricant - Deep penetrating, durable P.T.F.E. chain lubricant - Hold up to extreme conditions which can destroy ordinary lubes - Comfort bottle with pipette system for ease of use and application

Finish Line's Super Bike Wash quickly cleans dirt, clay, road grime and chain gunk off your bike. Five different cleaning agents work together to create a high-speed cleaning system. Three different rust and oxidation inhibitors protect metal surfaces to prevent rusting. It's safe for all bike surfaces.

**Same great formula as the 2oz, but only in a 1oz bottle!** Our standard LITE chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces. “Riding in” forms an extremely low-friction plating. Plating bonds to chain; can’t be washed off! Components stay cleaner, last longer, run quieter. Extremely durable, outlasts all other chain lubes! Environmentally sensitive and saves money. To be applied sparingly unlike many other other lubes. Lite and Original Bicycle Chain Lube (BCL) differ only in their concentration. Lite BCL is less concentrated for easier application and optimum performance. We recommend the Lite Bicycle Chain Lube for road bikes. You can confidently use Dumonde Tech’s Bicycle Chain Lubes on all cables, pivots points and seals. Safe on plastic, rubber and all seal materials. The product is designed to not harm your components. Eco-friendly and environmentally sensitive, our products are engineered to perform with minimal “carbon footprint” by not washing off in water, to use sparingly, lasts longer between applications, your drive train lasts longer. Very good performer in the extreme cold conditions. Preparation and Application of Dumonde Tech Lite Chain Lube: To prepare for maximum performance from Dumonde Tech Lite Chain Lube, use a high quality solvent, for example Dumonde Tech Citrus Solvent, to thoroughly clean and dry the chain before the first application. You will only need to clean the chain once, prior to the first application of Lite. For optimum performance, 2-3 applications is required for the bonding process to occur through polymerization. Apply sparingly and wipe off excess lubricant with a clean cloth to the point where the chain’s outer surface appears dry. One ounce of Dumonde Tech should give you at least 10 applications. Refer to FAQ if you experience a wet and/or dirty chain after riding. Re-apply Dumonde Tech Lite only when you begin to hear your chain; sound, not appearance or time, is the best indicator of when the chain needs a reapplication of Lite. Use mild soap and water to clean between applications. NOTE: Not available for Export. Cannot be shipped via air.

RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.

Finish Line's E-Shift Groupset Cleaner is specially formulated to keep your sensitive and expensive electronic drivetrain clean and safe. It quickly and safely removes grit, grime and moisture from electric shifting drivetrain components, including the front and rear derailleur, derailleur pulleys, chain, cassette and even the crankset. E-Shift is safe and will not harm the wires or electronics. Plus, it dries in minutes leaving the drivetrain parts clean, and with no rinsing required.

E-Bike Chain Lube is designed to handle the unique requirements of electronic assist bicycles. E-Bike chains are exposed to higher torque and wattage loads. With this in mind, Finish Line engineered a light wet lube with unique extreme pressure additives to ensure that the lube stays within the premature wear and protecting against rust and corrosion. Finish Line’s E-Bike Chain Lube is an ideal complement to any dealer specializing in e-Bike sales and service.

Maxima Serene Seat Post Fluid, for use in servicing Reverb Seat Post. - Not for use in Remote

E-Bike Cleaner is formulated to remove grit and grime from frames, wheels and components of e-Bikes. To ensure a clean e-Bike while not damaging expensive electronic components, Finish Line engineered a clinging foam cleaner that is gentle, noncaustic, leaves no streaks, and requires no water rinsing. Finish Line’s e-Bike Cleaner is an ideal complement to any dealer specializing in e-bike sales and service.

10 Weight Green Damper Fluid For rebuild and repair of Fox suspension. - 10 weight, 32oz bottle

Problem Solvers Frame Saver aerosol can with spout, 4.75oz. - Tried and true internal rust protection for steel frames - Protect your investment—each application lasts for years - One 4.75-ounch can treats 3 – 5 frames

Titanium is a super-light, exceptionally strong material that's great for bicycle frames and components, yet it requires a little special care for the best results. To stop cold-welding, galling or seizing of titanium components and fasteners, Finish Line offers Anti-Seize Assembly Lubricant. It's a premium blend of synthetic oils, graphite, bronze, copper and aluminum complex and works great as a conventional anti-seize for aluminum, stainless steel, and other specialty metals, too. - Works on all metals, but highly recommended when attaching reactive metals like titanium, aluminum, stainless steel and specialty alloys and magnesium - Prevents cold-welding, galling, and seizing of metal to metal contact parts, especially those subject to high torque and moist conditions such as bolt threads, seat posts, pedals and bottom brackets - 3-Pack of 6.5cc Sachets

DOT 5.1 brake fluid is compatible with all SRAM and Avid hydraulic disc brakes - Brake Fluid Type: DOT 5.1 - Bottle Size (Brake Fluid): 4 oz - Application (Brake Fluid): Disc Brakes

Maxima Racing oils was created for world class racers and has been on a 30 year journey to change the game in lubrication technologies to enhance user experience. They are a race-inspired, product driven company that formulates, develops, manufactures and distributes high performance oils, lubes and ancillary products. The Maxima Waterproof Grease is a lithium complex multi-purpose grease with the added benefits high density polymer. It has great mechanical stability, which means it won't thin out through normal usage, and also has excellent resistance to water wash out. The rust and corrosion inhibitors provide even more performance and protection under a vast array of working conditions. MAXIMA WATERPROOF GREASE FEATURES Salt Water Resistant Low-Friction Protects against rust & corrosion Resists heat & shock loads MAXIMA WATERPROOF GREASE USAGE Anywhere metal will come into contact will metal For use from -29°C (-20°F) to 293°C (560°F)

- Ultra durable, long distance chain lubricant - Excel in long distance wet or muddy conditions - It penetrates deep into the chain links core to provide long lasting lubrication and total protection - Extreme pressure additives coat every part of the link to provide silky smooth gear change and ultra efficient drivetrain

- A super duty cleaner that strips the toughest residues, Including brake rotor surface grime - Dries fast with no oily residue left behind - Exceeds all federal v.O.C. And california carb regulations - Law prohibits orm-D materials from shipping by air

WHY A.T.B. LUBRICANT? Most commercial chain lubricants are too thick and too sticky to function properly as a bicycle chain lubricant. Dust and dirt collect on the sticky lubricants and create an abrasive condition which quickly wears out the chain, the chain rings, and sprockets. A.T.B. Chain lubricant was blended with the least oily, least sticky extreme pressure and friction reducing compound available. A very special blended petroleum distillate carrier (which has lubricating qualities as well) was used as the carrier for the extreme pressure compound. In addition to the two proprietary compounds, a premium grade lubricating oil with very high load carrying capability was added to extend the service life and create a light rust preventative film. A special wicking agent has been blended in to allow the deep penetrating action required.