Skip to main content

FREE STANDARD SHIPPING on orders over $49*

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

All Drivetrain & Brake Parts

$14.00
- Prevents chain derailment when shifting to inner ring - Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes
$25.00
All Mountain Style Crank Guard A simple solution to eliminate shoe rub and other crank arm catastrophes Fits all carbon and aluminum cranks Made from the same honeycomb PVC as frame protectors Includes 4 pieces to extend protection up crank arm. Parts are 140mm/5.5" long and 54mm/2" wide
$8.00
- Premium 31-strand stainless-slick low-friction rust-resistant cable - X-long 3000mm cables for non-traditional uses
$16.00
Slip Avid's Shorty Brake Pad Inserts into your Shorty cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.
$19.00 - $23.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$27.00
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.
$27.00 - $33.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$30.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$37.00
Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.
$38.00
Cost effective stopping power from the leader in cable-actuated disc brakes. - All calipers have 74mm mounting bolt spacing - For use with with long cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Includes steel-backed organic pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 215 g
$49.00
Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.
$49.00
Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.
$50.00
Smooth, controlled braking is yours with Avid's HS1 Rotor. It utilizes cross-drilled technology to dissipate heat, save weight, and give you a consistent feel at the lever and predictable speed control in all conditions.
$65.00
The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with long cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No
$65.00
The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with short cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No - Weight: 204 g
$13.00
- Includes: (5) 8.5mm outer bolts, (5) 6mm outer bolts, (5) 5mm inner nuts
$39.00
- For use with Shimano XTR M980 crankset - CNC-machined 7075-T6 aluminum - Anodized grey with laser-etched graphics - Modified shift gates and profiles improve shift performance
$27.00
Campagnolo's Record Bottom Bracket Cups are perfect for your Campy Ultra-Torque crankset (sold separately). They are constructed from anodized aluminum for light weight and excellent durability. They are available in English and Italian thread. • Italian: 70mm • English: 68mm
$27.00 - $45.00
- Adapters press directly into specific PF30, BB30, BB86 or BBright frames and allow the use of standard Ultra-Torque (UT) crank sets and EPS components - Updated design increases surface area contact with the frame's bottom bracket, reducing the possibility of noise from frames with slight imperfections - Ultra-Torque OS Fit BB-cup tool is required for adapter installation
$40.00
Price point 11 Speed chain has a wider link design for increased shifting performance and reduced noise, and slotted links for reduced weight. - Designed specifically for use with Campagnolo 11 speed drivetrains only
$47.00
Ultra-Link Chains designed to maximize performance with Campagnolo drivetrains, while increasing durability and power transmission. - Delivers extremely high performance levels and durability over time - Design is optimized to perform with teeth on sprockets and crowns of Chorus drivetrain components - Solid pins are aligned with the external surface for smoothness and precision - 5.15mm width is designed to produce faster and lighter shifting Specifications: - Links: 110 - Chain Connection Type: Pressed Pin - Half Link Chain: No - Drivetrain Speeds: 12 - Weight: 241g
$50.00
Record chains represent Campagnolo's highest quality and performance chains and are available in 9, 10 and 11 speed versions. - Chrome-Nickel-PTFE finish - Designed specifically for use with Campagnolo 8 and 9 speed drivetrains only - Links (links): 114 - Color: Silver - Width: 6.8 mm - Drivetrain Speeds: 9 - Chain Connection Type: Pressed Pin - Half Link Chain: No - Weight: 300 grams
$50.00
Campagnolo's Veloce 10-Speed chain boasts an anti-friction coating for a smooth, quiet drivetrain and outstanding durability. It's the perfect match for your Campy-endowed road machine.
$60.00
For smooth shifting and a quiet drivetrain, pick up Campagnolo's Chorus 11-speed chain. It's unidirectional for unparalleled function and features lightweight hollow pins as well as an anti-friction treatment for shifting perfection. It also boasts excellent wear and flex resistance.
$64.00
New Super Record 12 Speed chain: slim, robust, smooth and precise. The chain, in all its apparent simplicity, plays a critical role in the cyclist's safety and in optimizing the entire transmission mechanism. The new Super Record 12 Speed chain also had to be redesigned from scratch to work with all the other new transmission components. Therefore, the first and most important objective was reducing its overall dimensions. Its width is now 5.15 millimeters, thanks to the new pins which are perfectly aligned with the links’ outer surfaces. The second objective was safeguarding its performance. This was achieved thanks to the Ultra-link system that makes the chain safe and durable, and a special treatment that guarantees extreme smoothness and precision shifting.
$65.00
Campagnolo Ultra-Torque Bottom Bracket Cups PF30-46: External cupset only. Spindle and bearings installed on crankarms. Compatible with Campagnolo Ultra-Torque and Fulcrum Racing Torq cranksets. EPS compatible.
$74.00
Campagnolo's Record 11-Speed Chain is the right choice for Campagnolo 11-speed drivetrains. This fine chain is engineered for excellent strength, long wear and brilliant shifting thanks to a unidirectional design and an anti-friction treatment that lets it glide across your cassette. It also boasts hollow pins to keep your bicycle as light as possible.
$100.00
Compatible only with Record or Chorus square taper cranks. Features three cartridge bearings and a chromoly steel spindle. - 3 sealed cartridge bearings, 2 on the drive side, 1 on the non-drive side - Removable cups are machined from 7000 series aluminum - Unique taper is not compatible with Shimano - Weight: 220 grams
$103.00
The Campagnolo Chorus front derailleur provides immediate, responsive upshifting with extreme precision. - Upper semi-rod not connected to the lower one for more effective, precise movement and no contact with travel limit - The derailleur stops transmission contact and friction to improve maximum cross-chaining situations - Designed to accommodate tires up to 32mm without the risk of contact with the derailleur - Double-position fixing of the cable allows for maximum compatibility with frames and tires - An optimized position for every engaged sprocket means limited risk of contact with the chain Specifications: - Derailleur Capacity: 16 - Front Der/Shifter Compatibility: Campy Centaur/Potenza/Chorus/Record/Super Record 2015+ - Max Ring (teeth): 52 - Front Derailleur Style: Traditional - Front Derailleur Cable Pull: Bottom Pull - Front Derailleur Clamp: Braze-on - Drivetrain Speeds: 12
$125.00
- 50-34 tooth 11 speed Campagnolo chainrings - X.P.S.S. technology for faster and more efficient shifting than previous generation chainrings - Compatible with all 4-arm cranksets (2015+) - 112/145mm BCD
$129.00
- 52-36 tooth 11 speed Campagnolo chainrings - X.P.S.S. technology for faster and more efficient shifting than previous generation chainrings - Compatible with all 4-arm cranksets (2015+) - 112/145mm BCD
$170.00 - $209.00
Campagnolo's Chorus Cassette offers precise, fluid shifting for your 11-speed drivetrain. The teeth have been exquisitely engineered and machined from steel, then coated with a nickel-chrome surface treatment and mounted on an aluminum carrier for flawless shifts and excellent durability.
$180.00
The Campagnolo Chorus 12-speed rear derailleur features 3D Embrace technology and 12-tooth pulley wheels making it suitable for all cassettes as the distance stays optimum on each individual sprocket, regardless of the cassette selected. - Embrace technology not only keeps the rear derailleur vertically aligned in the perfect position for each sprocket, it now makes the upper pulley wheel advance perfectly in the direction the bike is advancing - On rough roads, the spring positioned between the upper body and the pivot absorbs the vibrations, ensuring the chain always rests properly on the sprockets - The pulley wheels on the 12-tooth derailleur cage allow the chain to move more smoothly - The initial position of the rear derailleur can be adjusted to suit any cassette. - The rear derailleur is positioned further back, making it easier to slide the wheel out and replace it - Upper and lower body crafted from technopolymer that is reinforced with long carbon fiber for exceptional durability Specifications: - Largest Cog: 34 - Rear Derailleur Mount Type: 10x1 Standard - Chain Wrap Capacity (teeth): 37 - Cage Length: Medium - Rear Der/Shifter Compatibility: Campy 12-Speed Chorus/Record/Super Record 2019+ - Drivetrain Speeds: 12 - Weight: 240g
$205.00
Steel sprockets with nickel-chromed finish. Built with one triplet and 8 single sprockets. - Includes lockring - 11-32t compatible only with medium-cage rear derailleur - Cassette Body Type: Campagnolo 10/11 Speed - Weight: 249g
$239.00
The Campagnolo Chorus cassette offers cyclists even more versatility and greater choice and autonomy in terms of available gears. - Designed as the same width as 11-speed cassettes to maximize compatibility with wheels and frames - The two bigger sets of three in a single-block piece eliminate energy dispersion - Surface treatment increases durability and smoothness - Cassette Body Type: Campagnolo 10/11/12 Speed - Drivetrain Speeds: 12 - Color: Silver - Defined Color: Silver
$11.00
• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown
$379.00
The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design, while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed Bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The BSA for SRAM DUB Road comes in two versions. The first is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: BSA - Opening diameter: Threaded - Shell width: 68mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet - Spacertube
$379.00
BSA is another way of stating English threading. The initialization comes from Birmingham Small Arms, which made bicycles. English threading on road bikes mean a 68mm wide, 34mm inside diameter shell with reverse threading on the drive side. It's the most common threaded standard employed today. This kit works with 24mm diameter cranks, found on cranks from Shimano, FSA, Rotor, and others. Choose between two bearings for the cups. Standard Bearings have low drag thanks to hardened-steel races and our Ceramic balls. Coated Bearings have those same balls installed on coated, hardened-steel races for longer life and less bearing drag. 24mm spindles easily fit through the shell and allow for large bearings to be employed in the outside cups. Put more of your energy into forward motion by reducing frictional drag wherever you can. CeramicSpeed Standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. CeramicSpeed balls are 100% smoother and 15% harder than ceramic competition. The bearings last at least 3x longer than other bearings. In The Box: - 2 threaded cups with bearings - 2 dust covers with built-in spacers - Spacer tube - 10mm syringe of All Round Grease - Sticker sheet
$379.00
The EVO386 standard is designed for oversized spindles. CeramicSpeed's kit for Shimano allows you to install Shimano or FSA cranks with 24mm spindles. The cups come with CeramicSpeed Bearings installed. Both CeramicSpeed Standard and Coated Bearings are available. Both utilize super smooth CeramicSpeed Balls and hardened-steel races. The latter has an additional metallic coating on the races to further smooth and harden the steel, further increasing life and lowering drag. The design of overlapping cups extending through the shell for EVO386 reduce the likelihood of creaking and increase the reliability of the system. The CeramicSpeed Standard Bearings feature an average drag reduction of 75% compared to stock bottom brackets. That translates into frictional drag of 0.3-0.4 watts per set, which is the result of great design, hardened-steel races, and ceramic balls that are 100% smoother and 15% harder than the ceramic competition. The CeramicSpeed Coated Bearings are a step up as they reduce drag by 50% compared to our Standard Bearings and an improvement in bearing life by 60%. All Round Grease comes standard in the bearings, but can be replaced for lower drag TT and Track Grease or higher durability LongLife Grease, which adds a bit of drag but stays in the bearing when riding through messy conditions. In The Box: - 1 bottom bracket with bearings installed - 2 dust covers - 10ml syringe of All Round Grease - Sticker Sheet
$21.00 - $28.00
Chris King's Bottom Bracket Conversion Kits make sure that you can match up your frame with your cranks, all while enjoying the super smooth performance of King's in-house stainless steel bearings. These adapters are compatible with frames that feature a Press Fit 30 bottom bracket.
$176.00
Chris King has been making stainless-steel sealed bearings for 34 years, and never has there been a component that benefited more from their quality than the press-fit bottom bracket. The Chris King bottom bracket is specifically designed for frames that utilize pressed in bearing cups and is available in the full assortment of colors that only King can do. It all starts with the bearings. King makes their own bearings in-house and the process allows them to place more balls per bearing—24 to be exact. More rolling elements per bearing creates a stronger overall bearing system. This bottom bracket works seamlessly with King's precision injector tool (sold separately), so that flushing new grease into your bottom bracket is a quick and easy operation.
$212.00
Why We Make It We build bearings, so we build bottom brackets. The humble threaded bottom bracket is often the first part installed on a new frame, and the last one the rider thinks about during the life of the bike, but the bottom bracket has a direct effect on pedaling efficiency (read: speed). This is where you put your power into the bike. Having the absolute best interface between your effort and your bike’s forward momentum makes your ride better. The Threadfit™ 24 is how we make bikes that take 24mm cranks the best they can be. Why You Want It ThreadFit™ 24 fits 24mm cranks in BSA bottom bracket shells. Our ThreadFit™ 24 bottom bracket is designed and built to be durable, serviceable, and silent. Manufactured to create the most precise interface between your frame’s bottom bracket shell and your cranks, it makes your cranks spin lightly and easily, without interference, for the lifetime of your bike (with a little regular service). King’s legendary, angular-contact bearings, both steel and ceramic, are the best in the industry, and actually get faster over time, as their contact surfaces wear. You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket. Our Threadfit™ 24 bottom brackets come in an array of beautifully anodized colors and each one includes a Fit Kits that allow our ThreadFit™ 24 to be used with a wide selection of road and mountain bike cranks. - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - Available in 8 beautifully anodized colors - A Fit Kit is required for use - Ceramic bearing upgrade available
$212.00
Chris King ThreadFit 24 bottom brackets are designed and built to be durable, serviceable, and silent. Bearings can be serviced with the Chris King Grease injector tool. - King made-in-house bearings - 5-year warranty - Included Fit Kit #4 is designed to mate the ThreadFit 24 bottom bracket with a 24mm spindle - Spindle Interface Type: Shimano Hollowtech II - BB Shell Width (mm): 68 , 73 - Bottom Bracket Shell I.D.: 1.37 - BB/Frame Interface: English
$212.00
Chris King ThreadFit 24 bottom brackets are designed and built to be durable, serviceable, and silent. Bearings can be serviced with the Chris King Grease injector tool. - King made-in-house bearings - 5-year warranty - Included Fit Kit #6 is designed to mate the ThreadFit 24 bottom bracket with a GXP spindle - Spindle Interface Type: SRAM/Truvativ GXP - BB Shell Width (mm): 68 , 73 - Bottom Bracket Shell I.D.: 1.37 - BB/Frame Interface: English
$212.00
Our ThreadFit 24 bottom bracket is designed and built to be durable, serviceable, and silent. Manufactured to create a precise and functional interface between your frame’s bottom bracket shell and your cranks to ensure that your cranks will spin lightly and without interference. We have developed a range of conversion kits that allow our ThreadFit 24 to be used with a wide selection of road and mountain bike cranks. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Legendary made-in-house bearings - Responsibly lightweight - Easily serviceable with our integrated grease injection system - Find your fit with our required conversion kits - Ceramic bearing upgrade available
$212.00
Chris King ThreadFit 30 bottom brackets are designed and built to be durable, serviceable, and silent. Bearings can be serviced with the Chris King Grease injector tool. - King made-in-house bearings - 5-year warranty - Included Fit Kit #1 is designed to mate the ThreadFit 30 bottom bracket with a DUB MTB 28.99mm spindle - Spindle Interface Type: SRAM DUB - BB Shell Width (mm): 68 , 73 - Bottom Bracket Shell I.D.: 1.37 - BB/Frame Interface: English
$212.00
The Chris King ThreadFit T47 24i Bottom Bracket provides the security and reliability of a threaded bottom bracket with the stiffness and power transfer gains of a PressFit 30 bottom bracket shell. - ThreadFit T47 24i fits 86mm and 92mm shell widths with 24mm spindles - Legendary made-in-house bearings - Easily serviceable with a grease injection tool - King Lifetime Warranty - Included Fit Kit #6 is designed to mate the ThreadFit T47 24i bottom bracket with a GXP spindle - Spindle Interface Type: SRAM/Truvativ GXP - BB Shell Width (mm): 86 , 92 - Bottom Bracket Shell I.D.: 47 - BB/Frame Interface: T47
$212.00
The Chris King ThreadFit T47 24x Bottom Bracket provides the security and reliability of a threaded bottom bracket with the stiffness and power transfer gains of a PressFit 30 bottom bracket shell. - ThreadFit T47 24x will fit 68mm and 73mm shell widths with 24mm spindles - Legendary made-in-house bearings - Easily serviceable with a grease injection tool - King Lifetime Warranty - Included Fit Kit #6 is designed to mate the ThreadFit T47 24x bottom bracket with a GXP spindle - Spindle Interface Type: SRAM/Truvativ GXP - BB Shell Width (mm): 68 , 73 - Bottom Bracket Shell I.D.: 47 - BB/Frame Interface: T47
$100.00
This freehub body allows you to run 11/12 speed Sram XD cassettes on DT Swiss 180/240/350/440 hubs as well as hubs that use DT Swiss internals. Please reference your wheel's manufacturer to ensure that this freehub body will work with your wheels Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.
$2.00
- Aluminum straddle cable carrier for cantilever brake
$48.00
Dimension Multi Speed Chainrings. - CNC-machined AL-7075 - Has ramps and pins to aid in shifting (not on 74mm BCD inner chainring) - Same BCD as Surly Long Haul Trucker, Cross-Check, and Troll complete bikes (74mm & 110mm)
$479.00
A lightweight chassis, EVOL air spring, and dual-piston damper with a 3-position switch create a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency. “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat.
$14.00
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles
$27.00
Full Speed Ahead chainrings have powered multiple World, Tour de France, and Olympic champions, and will exceed your expectations. - Chainring can be used with FSA SL-K direct mount outer chainrings - Precision CNC machined AL7075/T6 - Shifting ramps and stainless steel pins on outer rings - Compatible with Modular crankset (Gossamer/Energy / SL-K / K-FORCE) - Laser-etched logo - Material: Aluminum - Ring Position/Type: Inner - Drivetrain Speeds: 11 - Chainring BCD: 90mm
$32.00 - $50.00
FSA Pro Road Chainrings deliver flawless shifting for any road drivetrain. - Precision CNC machined AL7075/T6 alloy
$33.00
FSA CK-220 eBike Crankarms compatible with Bosch Gen 4 engines. - Diecast alloy crank arms - ISIS drive
$33.00
FSA’s quiet, efficient, and durable chain. Team Issue chains are nickel plated and chamfered to enhance shifting performance. - Tool-free connector link included - 6.4mm width - Weight: 275g
$34.00
Running a conventional threaded bottom bracket on your BB30 or PF30 frame doesn't have to be complicated. This press-fit adapter from FSA goes in snug and opens up a lot of crankset possibilities for your BB30/PF30 frame. - Aluminum - Allows conventional threaded bottom brackets to be installed in a BB30 or PF30 frame - Install with headset press (not included) and green Loctite (included)
Page 1 of 21 Next page