-Mounts easily to front racks with threaded M5 mounts -Allows for unobstructed light positioning -22.2mm clamping diameter
Mid Cobber produces an incredible 330º of light, so you'll be clearly seen from all angles. In an increasingly busy world, this bike light is brilliantly effective at attracting attention and helping keep you safe on the road. Packing 320 lumens this Mid Cobber is seriously bright. The Cobber has integrated USB recharging, is 100% waterproof and you can program the settings using the Modemaker app. It mounts with tool-less removable silicone straps for bars/seat posts 22 – 32mm+ diameter with magnetic mount (aero Mount also included). If you are looking for the best commuter bike light around, look no further. - Light modes: Max, Mid, Steady Pulse, Flash, Rolling Flash, Side Flash, Disco Flash, Eco Flash come pre-programmed - LEDs: Efficient Chip on Board (COB) LEDs designed to provide maximum brightness level for up to 90% of the battery burn time for each mode - Charge time: 4 hours (LED will turn off when fully charged) - Battery: USB Rechargeable Lithium Polymer - Accessories included: Standard Mount, Aero Mount, 3x interchangeable straps for bars/seat posts 22-27mm / 28-32mm+, and USB extension - Dimensions: 62 x 33mm - Weight: 44g
The 2'Fer-XL is the big brother of Blackburn's popular 2'Fer light. This light works hard, pulling double duty as either a 200 lumens front or a 40 lumens rear light, depending on your needs. The clever mount design lets you easily pop it onto your bike's handlebar or seat post, or use the clip to mount it on your backpack or belt. Features: - Meets ANSI FL-1 standard - Front or rear capable - Excellent side visibility - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-67 standard - Optimized Lenses - LED Fuel Gauge/Charge Indicator - Aluminum construction - 3 hour recharge time - 78g / 0.17lb each Front: - 200 Lumens - Runtime: High 2hrs, Flashing 6hrs Rear: - 40 Lumens - Runtime: High 4hrs, Flashing 12hrs
The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory.
Charge, Click, Go Click Power Free yourself from the hassle of batteries! This small but essential accessory makes you visible to traffic. Bright side beams throw off additional light, and the silicone mount fits almost any handlebar. A Micro-USB cable makes it easy—just charge, click and go! - Charging cable included, no tools required - Lithium polymer battery - Waterproof to IP-65 standard - 3-hour recharge time
Not too long ago, a 400 lumen headlight for this price would have been a pipe dream, but now the Blackburn DayBlazer 400 is a dream come true! Featuring eye-popping BLITZ daytime running mode to grab the attention of cars, IP-67 submersibility, and ample side visibility, the DAYBLAZER 400 puts light where riders need it most. - No tools required - Lithium-ion battery - Waterproof to IP-67 standard - 3 hour recharge time - LED Charge Indicator - Runtime: High 1hr (400 lumen), Low 5 hrs (200 lumen) - Runtime Pulse/Strobe: 6hrs (200 lumen)/10 hrs (200 lumen) - 59g
The Plus front bike light is a super-bright, 100% waterproof and versatile USB rechargeable bicycle light. Mount the light to your handlebars or forks, or use the integrated wearable clip to attach the light to your shirt pocket or panniers. More of a runner than a cyclist? No worries. The Plus light also doubles up as a wearable night running light. Just attach the light to your t-shirt, shorts, socks or headband using the smart integrated clip. With an output of 40 lumens and a run time of up to 20 hours in eco flash, the Plus ensures you are well seen to all other cyclists, road users, and trail runners all night long.
Heads Up. Hands Free. Whether you are making coffee in camp before dawn, or fixing a flat late at night, its helpful to have your hands free with a light focused on your work. We developed the Outpost Bike & Camp headlamp with that specific need in mind. Additionally, we installed a silicone lampshade over the light source that can allow you to bring the light down to a soft ambient glow, should the mood strike you. On or off the bike, in or out of camp, this light is meant to provide you with the extra versatility you need to focus on the task at hand, by getting up to 400 lumens of light out of your hands, and onto your forehead. - 72 grams - 1 Lithium polymer battery included - IP-65 submersible - ingress protection rating or "IP rating," is a techy way to describe the level of water- and dust-proofness of a product. This light meets the IP-65 standard, which means it is totally protected against dust/grit and protected against low-pressure water jets from any direction. - Charges via any standard USB port (charging cable included) - Silicone HB strap, bag/rack clip, retractable head mount - Bike Mode: Blitz 400 lumen, 1 hr runtime; Low 200 lumen, 2 hr runtime; Strobe 200 lumen, 8 hr runtime - Camp Mode: High 100 lumen, 3.5 hr runtime; Long Burn 40 lumen, 8 hr runtime
Replacement bar mount for Urban lights with thumb screw for quick removal. Has a quick release design allowing the mount to quickly separate from the light. Compatible with all model year Urban lights. - Includes mount, strap, allen key, and bolt
This mount is designed to securely attach your Light and Motion Seca, Vega, or Stella headlight (sold separately) to your helmet. With a helmet mount, the light is always pointing where you're looking.
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for their flagship tail light, the Sentinel. It allows you to fine tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It’s an easy-on and easy-off non-slip tail light mount that also features a grooved contact pad that makes this the ‘go-to’ mount for riders using aero seatposts. - Fits standard and aero seatposts System Compatibility: - Sentinel - Solas - Sabre - CherryBomb
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series
The Bar Fly 4 MTB is our mountain bike inspired mount made specifically for MTB, CX, and riders looking for a ‘top of the stem’ mounting solution. BF4 MTB mounts on right side of the stem and faces back over the stem. #BF4MTB-182 Modular system mounts a computer or GoPro base on top only. Compatible with 31.8mm and 35.0mm handlebars. Included in Box: BF4 MTB mount with hardware 7 Computer heads: Garmin, Polar, Wahoo, Mio, Joule, Cateye, Bryton GoPro base Light mount Shim for 31.8 handlebars Computer compatibility: Garmin Edge Series 200, 500, 510, 520, 800, 810, 820, 1000, 1030, Touring Watches 910XT, 920XT Polar M450, M460, V650 Wahoo ELEMNT and BOLT Mio 500, 505, 505HC Cyclo 200, 205HC, 210, 315HC, 400, 405, 405HC, 505HC, 605HC Magellan 315, 505 Powertap Joule Cateye Wireless models Padrone, Strada, Micro, Velo Bryton 100, 300, 310, 330, 530, 10, One, 410 Lezyne Micro, Mirco C, Mini, Macro, Super and SuperSE (Lezyne computer head is not included with BF4 mounts but is available for purchase)
The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter
The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light! System Compatibility - Lumina Series - MiNewt Mini Series - Mako Series
$249.00 - $255.00
The E3 Pro 2 accompanies bike travellers to the most remote regions of the globe as reliably as it lights the way of commuters on their daily way to work. Glare-free Terraflux2 lens provides large, near-field illumination with a far-reaching beam Side-illumination greatly increases the safety in traffic Wiring included, powered by standard dynamos (dynamo not included) Features a 305 lumen output with 5 minute stand time High-quality Multi-mount with its CNC-machined safety lock can be adjusted vertically with its dual pivot points Rugged wiring ensures a safe power transfer Water (fresh and salt) resistant housing AL-6061 anodized case Dimensions: 65 x 40mm Weight: 130g Item Specifications Bulb: LED
With the push of a button, the 2’Fer can switch between a white 60 lumen front light and a red 20 lumen rear light. Holding the button for 2 seconds turns the light on and off, and pushing the button once changes modes between white solid, red solid, white flashing and red flashing. The light also remembers which mode you were last using and turns on in that mode. - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-65 standard - 3 hour recharge time - 18g / 0.04lb each As Front: - 60 Lumens - Runtime: High 1.5hrs, Flashing 5hrs As Rear: - 20 Lumens - Runtime: High 1.5hrs, Flashing 5hrs
Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.
Spare mount for Blackburn's 2'Fer XL front or rear light
With powerful output and premium safety features, the cost-effective Vis 700 is the perfect match for road and urban cyclists. High visibility is paramount and the platform has dedicated amber sidelights that are distinct and easily recognizable by drivers, especially through intersections. City riders will appreciate the exclusive SafePulse beam, scientifically designed to provide the highest level of rider awareness without the risks associated with flashing lights. Easily mount on standard or oversize handlebars with a mount that provides enhanced grip and features quick release technology to remove in seconds. Reliable construction is unmatched in the market and exceeds the needs of daily riders. This is the only waterproof lighting platform with a certified IP67 rating—meaning the light is certified to withstand water immersion up to a depth of 1 meter. Commute with the added assurance knowing rain or shine the light will keep performing. Recharging is fast and efficient with the included Micro USB cable. Revolutionary safety innovations and power to out-shine standard rechargeable lights—Urban 700 is a great solution for riders that want premium quality at a lower price point. Key features - 700 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Visibility is enhanced with bright amber side lighting providing maximum safety through intersections and high-traffic areas - Daylight visible pulse mode keeps cyclist safe without the inherent dangers of flashing lights - Micro-peened reflector optimizes the beam pattern for road riders providing a smooth, even spot beam void of distracting hard edges - Multiple power settings include a one-touch High/Medium toggle to efficiently decrease intensity when full power is not needed - Multi-color battery indicator is driven by custom firmware to provide accurate battery status throughout entire runtime - Mounting is simple and effective with ultra-grippy rubber ensuring light doesn't slip on regular or oversize handlebars - Quick release allows the removal of the light in seconds while leaving the base mount on the handlebar - Waterproof design eliminates the leading cause of bike light failure - water immersion - Charging is reliable and simple with included Micro USB cable Tech Specs - Lumens: 700 (high), 350 (medium), 175 (low), 175 (pulse) - Runtime (minutes): 90 (high), 180 (medium), 360 (low), 720 (pulse) - Beam Angle: 20° (Spot) - Charge Time: 300 min - Fast Charge: No - IP Rating (FL-1): 67 - Depth Rating (FL-1): 1 meter(s) - Impact Resistance (FL-1): 1 meter - Product Weight: 121 grams - Product Dimensions: 1.2" x 1.2" x 4" - Compatible Mounts: Bar, GoPro, Helmet
To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector that allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included for flexible mounting options. Features - Lumen Output: 100 - 4 Modes with a Run Time up to 136h - 2 x AAA Alkaline Battery Powered - Weight: 82g - Battery: 2 x AAA Alkaline - Highly Visible up to 1 Mile - 100 Lumen Daylight Visible taillight - Water / Dust Resistant IP64 Rated Run Time - Fast Flash—96:00h - Pulse Flash—136:00h - Steady High—72:00h - Steady Low—127:00h
This mount securely attaches your Light and Motion Vis 180 Micro taillight to a standard rear bicycle rack (taillights and racks sold separately).
- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
Setup a light wherever you can connect a GoPro mount. Use this adapter to connect your Taz to any GoPro mounting option.
Need to replace a strap on the compact Vis 180 Pro taillight or the front mount of the Vis 360 Pro? This is a durable direct replacement that installs in seconds and can be cut to the preferred length.
The Supernova The Plug III Dynamo USB Charger is a thoughtful and discrete upgrade to your existing dynamo system. You are your own power plant with ThePlug III. It is simply wired to your front hub and is capable of charging your USB-A devices with 5A at 8 mph. ThePlug III transfers dynamo AC to USB spec, with not upper limit on charge speed. While Supernova does not recommend charging with simultaneous lighting system usage we have done it without issue. Replaces existing headset top cap Charges at 5V/500mA at 8mps Does not include steer expander New and improved with no upper charge speed limit
Being Seen From All Angles Has Never Been Easier We understand being able to see in the dark is important, but we also believe that so is being visible to cars. A recent study by the National Highway Traffic Safety Administration (NHTSA) showed 27% of bicycle accidents are side impacts and 30% of fatalities occur in intersections (between 2010-2017). With the Luminate 360 set, being seen from all angles while cycling has never been easier. The grid side beacon was imagined to work in with head/tail lights to keep you more visible from a full 360 degrees. While the grid side beacon can be used as a stand alone light, we believe it works best as part of our Luminate 360 light set. The Dayblazer 400 front light and the 65 rear are spec'd with blitz mode to keep you bright enough to be seen, day or night. - 165 grams (140 front, 48 rear, 58 side) - 4 Lithium polymer/lithium ion batteries included - Rear: Solid 50 lumen, 1.6 hr runtime; High Flash 65 lumen, 3 hr runtime; Low Strobe 35 lumen, 6 hr runtime - Side: High/Solid 85 lumen, 1.5 hr runtime; Low/Solid 50 lumen, 3 hr runtime; High/Flash 85 lumen, 3 hr runtime; Low/Strobe 50 lumen 6 hr runtime - Front: Blitz 400 lumen, 1 hr runtime; Low 200 lumen, 1.5 hr runtime; Pulse 200 lumen, 6 hr runtime; Strobe 200 lumen, 10 hr runtime - Charges via any standard USB port (charging cable included) - IP-65 Submersible - ingress protection rating or "IP rating," is a techy way to describe the level of water- and dust-proofness of a product. This light meets the IP-65 standard, which means it is totally protected against dust/grit and protected against low-pressure water jets from any direction.
The NiteRider Sabre 110 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye-catching visibility in both day and night. Features - Lumen Output: 110 - 6 Modes with Run Times: 1:45 – 17:00hrs - Charge Time: 2:30hrs - Weight: 28g - Battery: Li-Po - Low Battery Indicator - 110 Lumen Super Lightweight Daylight Visible taillight - Water / Dust Resistant IP64 Rated Run Times - Pulse Flash—7:00h - Flash—6:00h - Fast Flash—17:00h - Steady High—1:45h - Steady Med—4:00h - Steady Low—8:30h
Page 1 of 3 Next page