Fenders

- Releases front fender stays if debris is present in between fender and tire - Fits current and past Grasshopper, Cascadia ALX, Cascadia and Hardcore front fenders (not recommended for non-Planet Bike fenders)

Easy to install and available in various colors and designs, the Splash Pad Front Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and compatible with suspension forks. - A low-profile, easy-install fender that keeps riders clean in various conditions - Fits wide range of wheel sizes - Tool-free installation - Zip ties not included. Color zip tie options available through Problem Solvers.

The S-Guard is not just for road bike cyclists; this super-lightweight (24g) and small mudguard protects your bottom from mud and water. Made with super-soft material, it fits on nearly every saddle with the addition of a cable tie.

Shockboard / Shockblade & Dashboard hardware kit (for 2nd bike)

Our Coast Fender integrates perfectly with our Syncros 2019 saddles equipped with two threaded inserts. Simply attach, adjust with the two included screws, and ride. - Designed for Syncros 2019 saddles equipped with threaded inserts - Includes 2 mounting screws - Flexible material enabling you to jump off the bike easily - High-impact resistant composite - Approximate Weight: 22g

A lot of bikes, particularly performance road bikes, have next-to-no clearance between the wheel and the frame, leaving little space for a traditional fender. So what is a Portlander supposed to do? Hang up the bike 8 months out of the year? Never! River City Bicycles has designed a workaround – a Reacharound – that allows for split-fender installation on bikes that won’t take a traditional fender. Built exclusively for River City Bicycles, each set of Reacharounds includes three special fender-mounting brackets (two for the back and one for the front). We also include instructions for splitting and mounting a fender set. If at all possible, have a trustworthy bike mechanic take care of the installation since each bike is different and a perfectly good set of fenders will need to be cut. Your installation may require additional hardware.

Just the thing for rainy weather, the Portland Design Works minimalist Origami Front Fender attaches to a snap-on/off bracket you mount on your downtube. And it folds flat so you can easily stow it when not in use. - Length: 370mm (14.5") - Weight: 60g (2.1oz)

The X-Board is an innovative clip-on fender with rubber fasteners for downtube mounting. - Adjustable soft rubber cable-spacers, ideal to adapt on almost any tube profile - Robust rubber fasteners - Dual compound-softspoiler

Portland Design Works has given the original fat bike front fender a facelift! The Mud Shovel 6.5 Front Fender was designed specifically for fat bikes - they're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. Made of heavy-duty polymer, the Mud Shovel 6.5 Front Fender is super lightweight but sturdy enough to take years of bad weather abuse. The fender mounts to the downtube of your bike using adjustable rubber straps for a secure fit. - Front fender is 254mm wide and 622mm long (10" x 24.5") - Extra-long, wide design blocks snow, water and sand - Bracket keeps fender super stable and is easy to install - Built with lightweight, sturdy materials for durability

Our hugely successful fender range is now expanded to include newer models. This version is specifically designed for the latest generation of FOX 36 forks as well as FOX 38 fork models. The fender mounts directly to the fork using two screws in the crown and the bleeding ports (no zip ties here!) Integration at it's finest, now with added mud protection compared to the first generation with additional seal protection thanks to the side walls. 2 Torx screws and Torx and hex tools included for installation.

Much like our regular Trail fenders, the DH fender integrates perfectly with a Fox 49 fork to offer the perfect solution for when trail conditions are of the wet kind. Fully customizable, you can mount the full set, (extending either side of the fork) or the rear part only depending on riding conditions. Our solution is screwed securely into the bridge, no need for zip ties for the ultimate clean look. Fully compatible with both FOX 40 / 27" and FOX49 / 29" wheel size thanks to 2 sets of mounting holes. - Designed for FOX 40 and 49 forks - Optimized fit through two screws on fork arch - Can be mounted as single rear or front + rear parts - Highest level of integration, durability and protection from mud - High-impact resistant composite - Approximate Weight: 107g, hardware included - Dimensions: 250mm

The Fender Flute fits inside most forks and attaches to standard front fender tabs for mounting fenders closer to the wheel. - Especially helpful for fender mounting on suspension-corrected forks - Threaded M6 holes at 10mm intervals for fine-tuning fit - Bolts and lock washers included

- Designed for FOX 34 Step Cast forks with an optimized ft through two screws on fork arch. - The highest level of integration, durability, and protection from mud - Mounted with 2 supplied Torx screws, tool included

The Syncros Trail Fender is made from a high-quality Impact PP that balances stiffness and durability. Designed to work specifically with Fox 34 & 36 Boost forks, the Trail Fender features a 2-bolt direct mount. This means a clean and reliable mount that is easily removable.

Just the thing for rainy weather, the Portland Design Works minimalist Origami Rear Seatpost Fender attaches to a clamp-on bracket you mount to your seatpost. And it packs down so you can easily store it when not in use. - Length: 445mm (7.5") - Weight: 160g (5.6oz)

With these mudguards, kids can also pep up their bikes like the grownups and are well protected against dirt on their way to school or on the weekend tour.

No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.

These clip-on fenders are designed specifically for fat bikes. They're extra-long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. - Extra-long and wide to accommodate the biggest tires - Easy to install and fits virtually any bicycle

SKS's S-Blade rear fender attaches easily to almost any road bike seatpost, protecting you from road spray and letting you ride through the wet.

No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it's longer and fatter than the regular X-tra Dry so it works great with 29ers and fatter 700c tires. It's also a breeze to attach with its easy-to-adjust seatpost mounting strap.

Our hugely successful fender range is now expanded to include newer models. This version is specifically designed for the latest generation of FOX 34 forks. The fender mounts directly to the fork using two screws in the crown (no zip ties here!) Integration at it's finest, now with added mud protection compared to the first generation with additional seal protection thanks to the side walls. 2 Torx screws and Torx Tool included for installation.

Keep your little rider dry and clean with SKS's Rowdy fenders. They're compatible with a wide variety of frame types and feature durable mounting brackets for worry-free use.

The Shockblade 26/27.5-inch is a clip on front, high-quality 2-component fender for mounting on the fork of 26-inch and 27.5-inch mountain and trekking bikes. - Virtually unbreakable high quality dual compound plastic - Hidden chuck cone adapter which is fitted once during first assembly - Easy quick-release fastening - Optimized dirt protection - Fits almost all suspension forks - 26-inch and 27.5-inch wheel compatible

The Shockblade 27.5+/29-inch is a clip-on front, high-quality 2-component fender for mounting on the fork of 27.5+ and 29-inch mountain and trekking bikes. - Virtually unbreakable high quality dual compound plastic - Hidden chuck cone adapter which is fitted once during first assembly - Easy quick-release fastening - Optimized dirt protection - Fits almost all suspension forks - 27.5+ and 29-inch wheel compatible

The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 27.5+ and 29-inch wheel compatible

Stay clean and dry with SKS's Commuter II fenders! The stainless-steel hardware comes pre-installed for quick and easy mounting.

Mudrocker Front Fender for MTB is your perfect trail companion. Provides excellent mud and splash coverage on 27.5, 650b or 29er wheels with a maximum tire width of 3.0" Attaches to fork legs with hook and loop straps. Hook and loop strap fasteners or cable ties can be used to mount the Mudrocker to the fork bridge. If the fork bridge is perforated, the Mudrocker can be securely mounted with the included adapter. Fender can be adapted with scissors if necessary depending on the fork bridge. Perfect companion with the Mudrocker Rear Fender. - Measurements: 490mm - Weight: 112 grams - Compatiblity Notes: Compatible with disc brakes. Not compatible with V-brakes. - Made in Germany

STAY DRY FOR THE LONG HAUL. Keep water, mud, and gravel away with these simple, robust, and easy to mount Revolt-specific fenders. With clearance for up to a 40c tire, the Revolt Fender Set will give you the protection you need as you crush long, multi-terrain miles in any weather.

End wet feet forever! SKS Longboard are one of the longest and best coverage fender on the planet. They feature stainless-steel hardware and SKS's security clips for durability and safety. - 700c x 20-28

Mudrocker Rear Fender for MTB protects you AND your suspension and linkage from water and mud. Provides excellent coverage on 27.5, 650b or 29er wheels with a maximum tire width of 3.0" The fender attaches to the seat stays with hook and loop straps (or cable ties if perferred). With the included frame adapter pads, user can adjust the angle of the fender. The included rear extender can be snapped on and used for extra protection in the bottom bracket/derailleur area. Perfect companion with the Mudrocker Front Fender. (If you lose your Adapter Pads or your Extender, they are both sold separately as well.) - Measurements: 840mm - Weight: 172 grams - Made in Germany