Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

RaceFace Cinch Nylon Preload Collar and Screw
$3.00
- Preload collar for adjusting tension on bottom bracket bearings - For Race Face 30mm Cinch System cranks only
Sunlite Cottered Pin
$3.00
- Sunlite Cottered Pins
RaceFace CINCH Puller Cap with Washer 18mm XC/AM
$7.00
Race Face CINCH Crank Puller • Puller cap for Cinch model Race Face cranks only, including Next SL, SixC and Turbine • Puller cap utilizes 16mm hex key • 26mm thread
Wheels Manufacturing BSA Bottom Bracket Spacer
$7.00
Wheels Manufacturing 2.5mm Black Aluminum Bottom Bracket Spacers are for adjusting chainline or bearing play in English (BSA) or Italian threaded bottom brackets.
Problem Solvers Hex Crank Arm Fixing Bolt/Cap
$8.00
Problem Solvers Crank Arm Fixing Bolts - 8mm - Sold as a pair
Origin8 Double/Triple Chainring Bolts
$10.00 - $24.00
Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for double and triple chainrings, each set includes 5 male/female bolts to securely connect your chain rings to the crank. Available in black and silver, as well as aluminum or steel.
SRAM Carbon Crank Arm Boots
$11.00
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact. - Injection molded plastic crank arm protection - Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes - Material: Injection molded plastic - Recommended Group: XX1, X01, XX, X0
Origin8 Single Chainring Bolts
$12.00 - $26.00
Revamp the look of your single speed cranks with some new hardware. Origin-8's Single Chainring Bolts give a high polished look to any crankset. The anodized finish comes in multiple colors to highlight your crank and makes it look as good as you do. You can also choose between steel or aluminum bolts. • Set of 5 male/female bolts • Inside measures 4mm when tightened, 7mm total height
SRAM Carbon Crank Arm Boot
$12.00
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact. - For Descendant Carbon and non-Eagle XX1 and X01
FSA BB30 Crank Bolts
$14.00
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles
Wheels Manufacturing Crank Spindle Spacer
$14.18
Use these Wheels Manufacturing Crank Spindle Spacers to adjust chainline or bearing play in bottom brackets. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Machined engineering-grade Delrin - 10 spacers per bag
SRAM DUB Self-Extracting Bolt
$18.00
- Replacement bolt for DUB cranks
TruVativ Crank Arm Bolt, Self-Extracting M15/M26 GXP, BLK
$18.00
vendor part #: 11.6900.002.160 UPC: 710845614422 fits: GXP bolt/cap size: M15/M26 (alum) color: black UOM: each Crank bolt and self-extractor cap with washer (sold each or in pairs depending on application)
RaceFace CINCH Bolt with Washer 18mm XC/AM
$21.00
Race Face Cinch aluminum crank arm bolt. 18mm, fits XC/AM cranks.
Wheels Manufacturing Freewheel/BB Spacer
$22.05
Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10
Shimano EW-SD300 Di2 Charging Cable
$50.00
The new Shimano Di2 EW-EC300 charging connector is designed specifically for Shimano's 12-speed Di2 road drivetrains. Connected via the rear derailleur, it is also compatible with Shimano power meters. Charging of the new series of 12-speed Di2 road drivetrains is now accomplished with the EC300 charger cord. Attached to the rear derailleur, this new cord is less expensive than previous chargers and is also compatible with Shimano power meters.
Wheels Manufacturing BB30a/PF30a/BBright Adapter for 24mm Spindle Cranks
$61.00
Wheels Manufacturing BBRIGHT BB30A and PF30A Adaptor for 24mm Spindle Cranks adapts 24mm spindle cranks (Shimano, FSA, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Also adapts Cannondale BB30a and PF30a frames to 24mm spindle cranks (Shimano, FSA, etc.). - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 48g/pr
Wheels Manufacturing BBright Adapter for 22/24mm Spindle Cranks
$61.00
The Wheels Manufacturing BBright Press Fit Bottom Bracket Adaptor for GXP Cranks adapts 24/22mm cranks (SRAM, Truvativ, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 8g/pr
Wheels Manufacturing 386 EVO Adapter for 22/24mm Spindle Cranks
$64.05
The Wheels Manufacturing 386 EVO Adapter for 22/24mm Spindle Cranks adapts SRAM/Truvativ cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (1) - 24mm ID adapter (for right-side) - (1) - 22mm ID adapter (for left-side) - (8) - 0.7mm spacers
Wheels Manufacturing PF30 Adapter for 24mm Spindle Cranks
$64.05
The Wheels Manufacturing PressFit 30 Bottom Bracket Adaptor for Shimano Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
Wheels Manufacturing 386 EVO Adapter for 24mm Spindle Cranks
$65.00
The Wheels Manufacturing 386 EVO Adaptor for Shimano Hollowtech II Cranks adapts Shimano cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (2) - 24mm ID adapters - (8 )- .7mm spacers
DT Swiss XDR Aluminum Freehub Body Ratchet 12x142/148mm with End Cap, Fits 180/240/350/440 Hub
$95.00
This freehub body allows you to run 11/12 speed Sram XD cassettes on DT Swiss 180/240/350/440 hubs as well as hubs that use DT Swiss internals. Please reference your wheel's manufacturer to ensure that this freehub body will work with your wheels Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.
Easton EC90 SL Spider and Ring Assembly
$149.99
The Easton Spider and Ring assembly features the Cinch Direct Mount System, making a swap between ring configurations a fast and simple procedure. This system also provides a significant weight savings by eliminating the material overlap and extra bolt hardware that is required for a traditional spider with chainring configuration. - EA90 Aluminum
e*thirteen TRS+ Dual DMB Chain Guide
$150.00
- Dual ring chainguide with 6061-T6 backplate and removable direct mount bashguard - Replaceable upper sharkfin wearplate prevents chain drop and allows front shifting - Dual-position lower roller provides chain tension and security - Includes both 32-36t and 36-40t direct-mount bashguards - ISCG-05 models are adjustable for 48-53mm chainlines - 149g - Range: 32-40t
Specialized S-Works Carbon Spider
$160.00
This very light, stiff, and strong carbon crank spider optimizes your power transfer. - Stiff and lightweight. - For use with S-Works carbon road cranks.
Shimano Di2 BT-DN300 Battery Built-In for SD300 Wires
$185.00
All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/ Compatible with thinner, next generation electric SD300 wires and R9150 and R8150 series systems Features three SD300 wire ports Shared fixing method with BT-DN110 Built-in type U.S. spec Charger and power cable sold separately
Page 1 of 1