Filter By:
- Casual Shoes (7)
- Parts & Accessories (25)
- Cycling Shoes (117)
- MTB (28)
- Road (8)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Shoes
We have Portland's largest selection of men's, women's and kids' cycling shoes in stock from brands like Specialized, Sidi, Five Ten, Giro and Shimano. Not seeing a size or model your looking for? Give us a call—it is likely it has not been added to our webstore just yet.
$25.00
The Xpresso Free float cleats have been developed for the TIME Xpresso Road bike pedal range. They allow angular and lateral freedom in order to respect the natural movements of your legs and joints. You can also adjust the Q-factor (by switching the cleats), in order to optimize performance following 3 points: security, ergonomics and performance. The Bi-material brings more durability when walking with the cleats.
- Weight: 85g/pair
$60.00
- Very stretchy SoftShell fabric on the upper part to protect against wind and water
- Anti-abrasion treatment on the lower part, with a wider opening
- Elastic band below for easier entry
- Greater reflectivity
- Neoprene fabric on the front
$40.00
Body Geometry Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. With three different arch support options (Red+ being the lowest, Blue++ being in the middle, and Green+++ being tallest), you can be sure that every precious watt is preserved through the pedal stroke.
- Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot.
- Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour.
- Proprietary lightweight foam avoids taking a compression set for long-lasting performance.
- Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.
$70.00
For some serious protection in the cold and wet for your toes, slip on a pair of the Neoprene Shoe Covers—they're the perfect winter accessory to ensure your feet stay warm and dry.
- Rear opening with zippers securely blocks the elements from infiltrating the covers, while also easing entry and exit.
- Abrasion resistant toe and heel sole utilizes universal welted velcro closure, so these covers are compatible with both road and mountain shoes.
- Fabric Content: 100% Neoprene
$20.00
Replacement SL and SL2 shoe buckles, sold in pairs.
- Sold in pairs
- SL buckles for 2012 and prior shoes
- SL2 buckles for 2013 and newer shoes
- Low-profile
- Replaces without tools
$80.00
$110.00
27% Off
With the Recon 1.0 our goal was simple—put S-Works Recon-inspired performance in a very accessible package. Easier said than done, but we’ve created a shoe with Body Geometry comfort and efficiency in a durable, dirt-focused shoe. So yeah, mission accomplished.
Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. The Recon 1.0 is a double threat—efficiency at the pedals with comfort and confidence off bike.
To create traction off the bike in wet or dry, gravel or dirt, we’ve covered the nylon outsole with our SlipNot compound. We’ve also lifted the heel for an even more natural feeling while walking.
Three Velcro closures make slipping into the Recon 1.0 easy, and creates a fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and even more than your fair share of hike-a-bike.
- Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
- Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling (stiffness index 6.0)
- SlipNot rubber tread for confident traction on all terrain.
- Two-bolt cleat pattern fits all major MTB pedals.
- Approximate weight: 331g (1/2 pair, Size 42)
$120.00
The Recon 1.0 was made for riders who set out on two wheels to seek the great outdoors and saddle up their bike for the adventure ahead, with the scientifically proven performance benefits of Body Geometry.The Recon 1.0’s purpose is to add confidence and functionality for riders who push their limits uphill for an unforgettable view, maybe are even clipping in for the first time, or are hopping on their trainer for an after-work hammer session on the spin bike. Comfort and versatility are key, and that’s what the Recon 1.0 was made for.
Body Geometry: Like every Body Geometry shoe, the Recon 1.0 is ergonomically designed and scientifically proven to improve comfort, increase performance, and reduce the chance of injury for every rider with patented technology, while improving power by 7 watts - validated by science.
Stride Technology: Stride technology provides a flexible outsole and upper around the toe box combined with a stiff cleat pocket, enabling the shoe to easily flex when walking and remain stiff and efficient when pedaling.
Efficiency: The Recon 1.0 utilizes an L6 Boa Dial with soft-lace cables made from a Dyneema yarn, eliminating unwanted stretch while removing hard molded guides to give riders a more supple upper that comfortably conforms to the foot. Additionally, the outsole is optimized to put your power on the pedal through balanced stiffness.
- Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
- Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling (stiffness index 6.0)
- L6 BOA® Dial with soft-lace cables made from a Dyneema yarn.
- SlipNot™ rubber tread for confident traction on all terrain.
- Two-bolt cleat pattern fits all major MTB pedals.
- Approximate weight: 291g (1/2 pair, Size 42)
$80.00
$110.00
27% Off
With the Recon 1.0 our goal was simple - put S-Works Recon-inspired performance in a very accessible package. Easier said than done, but we've created a shoe with Body Geometry comfort and efficiency in a durable, dirt-focused shoe. So yeah, mission accomplished.
Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU-injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. The Recon 1.0 is a double threat - efficiency at the pedals with comfort and confidence off bike.
To create traction off the bike in wet or dry, gravel or dirt, we've covered the nylon outsole with our SlipNot compound. We've also lifted the heel for an even more natural feeling while walking.
Three Velcro closures make slipping into the Recon 1.0 easy, and creates a fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike.
- Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
- Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling (stiffness index 6.0)
- SlipNot rubber tread for confident traction on all terrain.
- Two-bolt cleat pattern fits all major MTB pedals.
- Approximate weight: 331g (1/2 pair, Size 42)
$80.00
$110.00
27% Off
With the Recon 1.0 our goal was simple - put S-Works Recon-inspired performance in a very accessible package. Easier said than done, but we've created a shoe with Body Geometry comfort and efficiency in a durable, dirt-focused shoe. So yeah, mission accomplished.
Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU-injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. The Recon 1.0 is a double threat - efficiency at the pedals with comfort and confidence off bike.
To create traction off the bike in wet or dry, gravel or dirt, we've covered the nylon outsole with our SlipNot compound. We've also lifted the heel for an even more natural feeling while walking.
Three Velcro closures make slipping into the Recon 1.0 easy, and creates a fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike.
- Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
- Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling (stiffness index 6.0)
- SlipNot rubber tread for confident traction on all terrain.
- Two-bolt cleat pattern fits all major MTB pedals.
- Approximate weight: 331g (1/2 pair, Size 42)
$120.00
$170.00
29% Off
Just because winning an XC World Cup isn’t on your to-do list, doesn’t mean you don’t value performance and comfort. Recon 2.0 is your shoe. Inspired by S-Works Recon, with Body Geometry comfort and efficiency, Recon 2.0 puts all that performance within easy reach.
Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in the saddle performance. We’ve also lifted the heel for an even more natural feeling while walking.
To create traction off the bike in wet or dry, gravel or dirt, we’ve covered the nylon outsole with our SlipNot compound. If the traction's needed in the wet, you can also rest easy knowing the XPEL mesh used through the Recon 2.0 won’t get bogged down with water and will dry exceptionally quickly. No more wet shoes the morning after a wet ride.
An L6-Snap Boa and a Velcro forefoot closure ensure micro-adjustable comfort with a secure fit designed for all-day comfort and performance, whether your ride calls for open gravel, twisting single track, and even more than your fair share of hike-a-bike.
- Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
- Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0
- Welded upper reduces seams for superior step-in comfort.
- BOA L6-Snap dials for on-the-fly micro-adjustment.
- SlipNot rubber tread for confident traction on all terrain.
- Two-bolt cleat pattern fits all major MTB pedals.
- Approximate weight: 357g (1/2 pair, Size 42)
$180.00
The Recon 2.0 was made for riders who seek out dirt roads and challenging trails in search of a shoe that delivers comfort and efficiency in a durable package, with the scientifically proven performance benefits of Body Geometry. Whether you’re saddling up a Diverge or Creo to ride with your gravel group or hopping on your epic to embark on an all-day trail session, the Recon 2.0 is your partner in crime for days spent in the dirt.
Body Geometry: Like every Body Geometry shoe, the Recon 2.0 is ergonomically designed and scientifically proven to improve comfort, increase performance, and reduce the chance of injury for every rider with patented technology, while improving power by 7 watts - validated by science.
Stride Technology: Stride technology provides a flexible outsole and upper around the toe box combined with a stiff cleat pocket, enabling the shoe to easily flex when walking and remain stiff and efficient when pedaling.
Efficiency: The Recon 2.0 features a Li2 Boa Dial for adjustability on the fly, making getting in and out of the shoe a breeze. BOA soft-lace cables made from a Dyneema yarn allow us to do away with hard molded guides for a more comfortable fit. The forefoot strap above the toes helps riders adjust volume around their toes to tailor the fit to their unique foot, connecting you to the bike for confidence when hitting a new feature or tackling loose and technical gravel.
- Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
- Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0
- Welded upper reduces seams for superior step-in comfort.
- BOA® Li2 dials for on-the-fly micro-adjustment.
- SlipNot™ rubber tread for confident traction on all terrain.
- Two-bolt cleat pattern fits all major MTB pedals.
- Approximate weight: 307g (1/2 pair, Size 42)
$250.00
KOM/QOM chasers, race podium challengers, and all devotees of speed don’t need to sacrifice comfort, durability, or off-the-bike capability when searching for an efficient race-ready shoe with the scientifically proven performance benefits of Body Geometry. A shoe that looks good, feels good, and is light yet capable can be hard to find—well, it used to be. Meet the all-new Recon 3.0, a not-so-distant relative to its S-Works counterpart: made for speed, durability, comfort, and now lighter than ever before.
Body Geometry: Like every Body Geometry shoe, the Recon 3.0 is ergonomically designed and scientifically proven to improve comfort, increase performance, and reduce the chance of injury for every rider with patented technology, while improving power by 7 watts - validated by science.
Stride Technology: Stride technology provides a flexible outsole and upper around the toe box combined with a stiff cleat pocket, enabling the shoe to easily flex when walking and remain stiff and efficient when pedaling.
High Performance & Efficiency: The Recon 3.0 pulls its cable routing, Boa dial placement, and carbon plate directly from our halo S-Works Recon. Dual, premium Li2 Boa Dials offer optimized adjustability and fit, while the cable routing ensures a locked-in feel, minimizing movement within the shoe. The carbon plate keeps the Recon 3.0 lightweight and stiff for optimal power output on the pedal, not to mention shaving 10 grams off our previous generation.
- Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
- Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0)
- Fully-welded upper reduces seams for superior step-in comfort.
- Independent BOA® Li2 dials for on-the-fly micro-adjustment.
- SlipNot™ rubber tread for confident traction on all terrain with removable toe studs.
- Two-bolt cleat pattern fits all major MTB pedals.
- Approximate weight: 345g (1/2 pair, Size 42)
$170.00
$230.00
26% Off
The Recon 3.0 is all about putting the legendary performance of our S-Works Recon - power transfer, comfort, light weight, style - in a package perfect for the XC and gravel rider. Starting with Body Geometry, Recon 3.0 delivers comfort and efficiency, with features that stand-out off the beaten path.
Looking for in the saddle speed as well as off-bike performance? Recon 3.0 mates a carbon outsole with a Pave-inspired glass fiber forefoot to create Carbon STRIDE toe-flex, which lets your foot function naturally off the bike, yet still provides incredible power transfer with a stiffness index of 10.0. Whether you're flying up a run-up on the 'cross course or strolling into the brewhouse post ride, STRIDE toe-flex is a game changer.
We know venturing off-road means venturing into the unknown, so we've given the Recon 3.0 XPEL Mesh to create a comfortable fit that sheds water, keeping the shoe light and making it dry as fast as it rides. Our SlipNot compound provides full rubber coverage of the outsole for off bike traction on any surface, with open treads to eject mud.
Dual L6-Snap Boas and a Velcro forefoot closure ensure micro adjustable comfort with a secure fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike.
- Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
- Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0)
- Fully-welded upper reduces seams for superior step-in comfort.
- Independent BOA L6-Snap dials for on-the-fly micro-adjustment.
- SlipNot rubber tread for confident traction on all terrain with removable toe studs.
- Two-bolt cleat pattern fits all major MTB pedals.
- Approximate weight: 355g (1/2 pair, Size 42)
$325.00
$425.00
24% Off
Finding the perfect cross country race shoes can be tough going, but with the S-Works Recon shoes, we've made the choice simple. Exceptional power transfer? Check. Gram-counter approved? Check. Undeniable style? You got it. With the S-Works Recon you get XC-focused mountain bike shoes that truly have no compromises.
We took a no-holds-barred approach to transferring every bit of your power to the pedals. The sole utilizes a rubber toe and heel for superior off-the-bike traction, while the pontoons are made of a harder TPU to provide excellent stability and power transfer to the pedal. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn't stretch when pulled on, making sure that your foot stays where it's supposed to. With all of these features combined, you can be sure that we've kept in line with the motto "every watt is sacred."
In the comfort arena, we kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. We also took luxury into account by designing the S-Works Recon to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC'd alloy Boa dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial-in your fit.
The S-Works Recon embodies everything we know about footwear, compacted into one shoe with no compromises, no shortcuts—just explosive speed and superior comfort.
- Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
- Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0
- Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort.
- Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee.
- PadLock heel construction cradles the heel and is proven to improve acceleration.
- Titanium alloy cleat nut.
- SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs.
- Form Fit last with a roomy toe box for the ultimate in connectivity and comfort.
- Two-bolt cleat pattern fits all major MTB pedals.
- Approximate weight: 270g (1/2 pair, Size 42)
$450.00
From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down.
Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips.
- High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform
- Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button
- Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar.
- Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight
- Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap
- Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care.
- For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes).
- 280g for a size 156
$450.00
From recent road converts, to sultans of dirt speed, the new S-Works Recon delivers pavement-bred performance to the gravel and XC discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down.
Inside and out, Body Geometry technology is baked into the the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there are no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as inline with your knee and hips.
- High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform
- Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button
- Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar.
- Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight
- Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap
- For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes).
- Approximate weight: 280g for a 1/2 pair size, 44
$450.00
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it.
Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency.
Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer.
Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel.
The S-Works Torch is scientifically crafted to disappear on your feet and off the front.
- New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot.
- Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe.
- By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation.
- An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit.
- Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar.
- Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments.
- Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee.
- Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals.
- Non-slip, replaceable heel tread with internally recessed screws for security.
- IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
$80.00
$110.00
27% Off
Remarkable performance and value make the Specialized Sport MTB shoes a remarkable pair of mountain bike shoes. This durable, lightweight shoe features Body Geometry fit, comfortable offset Velcro closures, and a sole with improved traction for hiking.
- Body Geometry sole construction and footbed: ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
- Injection-molded nylon composite outsole with rubber tread for moderate pedaling stiffness and phenomenal trail traction: Stiffness Index 6.0.
- Three-strap offset Velcro closure for comfortable fit.
- Durable synthetic leather and vented mesh upper.
- Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.
- Standard Fit for all-day comfort.
- Two-bolt cleat pattern fits all major MTB pedals.
- Approximate weight: 360g (1/2 pair, size 42)
$250.00
Whether you're hunting for Strava PRs or looking to ride big elevation, the all-new Torch 3.0 is the perfect companion. Combining classic aesthetics, premium construction, and elevated comfort, the all-new Torch 3.0 is a not-so-distant relative to its S-Works counterpart. Sharing key features like a unidirectional carbon plate, dual-zone Boa closure, and a seamless upper, the Torch 3.0 is an efficient, comfortable, and dependable performance shoe.
- Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
- Unidirectional Carbon sole engineered to be stiff, yet light with a large rubber heel and toe for off-the-bike traction.
- Dual BOA Li2 dials for dual direction micro-adjustments and pop release
- Seamless upper constructed from mesh, TPU, and with zonal reinforcement to maximize lockdown and comfort
- Internal heel counter provides a supportive and secure heel fit
- Three-bolt cleat pattern fits all major road pedals.
- Approximate weight: 288g (1/2 pair, Size 42)
$160.00
$230.00
30% Off
From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price.
In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa® S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort.
- Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment.
- FACT™ carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5.
- Dual Boa® S2-SV Snap Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee.
- Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit.
- Standard Fit for support and all-day comfort.
- Three-bolt cleat pattern fits all major road pedals.
- Approximate weight: 248g (1/2 pair, Size 42)
$160.00
$230.00
30% Off
From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price.
In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort.
- Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment.
- FACT carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5.
- Dual Boa S2-SV Snap dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee.
- Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit.
- Standard Fit for support and all-day comfort.
- Three-bolt cleat pattern fits all major road pedals.
- Approximate weight: 248g (1/2 pair, Size 42)
$160.00
$230.00
30% Off
From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price.
In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort.
- Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment.
- FACT carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5.
- Dual Boa S2-SV Snap dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee.
- Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit.
- Standard Fit for support and all-day comfort.
- Three-bolt cleat pattern fits all major road pedals.
- Approximate weight: 248g (1/2 pair, Size 42)
$20.00
Replacement strap compatible with Sidi's Caliper Buckle. Includes two straps.
$240.00
$325.00
26% Off
Microtech Microfiber incorporates features of resistance, stability, lightness, transpirability, water-repellency and eco-friendliness. It is manufactured using the "Water-Tech” water treatment:
- Lower environmental impact
- Less noxious emissions into the air and into the work environment
- Water-based products, not solvents, were used, which is beneficial to the environment as well as the final user.
The Soft Instep 4 Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The Soft Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The Soft Instep Closure System is replaceable.
Sidi's Techno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. Sidi's famously reliable and replaceable closures are improved by an all-new proprietary Sidi Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most Sidi small parts, the Techno-3 Buckle is serviceable and replaceable.
- Reinforced heel cup.
- The MTB RS17 SOLE consists of a Nylon and PU blend. This sole is lighter than the traditional competition sole and has been updated with a more aggressive tread pattern and a replaceable toe tread insert.
- Regular "D" width last for precise fit.
$130.00
$260.00
50% Off
- Women-specific design provides a more tapered foot shape, less volume around the instep and narrower heel cups than the men's version
- Wide, anatomically curved straps with soft thermoformed EVA pads distribute pressure evenly over the instep area
- Microtech microfiber uppers with non-solvent-based treatment provide water-repellent, supple and durable performance
- Caliper Buckle 2-way ratchet allows easy on-bike adjustment with incremental tightening and loosening
- Padded tongues eliminate pressure points
- High-security hook-and-loop straps won't shift or slip
- Reinforced heel cups reduce heel slip, boost power transfer and provide additional foot protection in the event of a crash
- Millennium 5 carbon-composite soles use injected carbon fiber in a matrix of nylon, providing more rigidity than standard nylon soles
Replaceable, lightweight polyurethane heel pads improve walkability
- Sizing is specific to Sidi; please consult size chart to determine your correct fit
$220.00
$325.00
32% Off
Upper: Microfibre microtech
Sole: Carbon composite 20 sole
Technology:
- Soft instep 4
- Tecno 3 system
- Sidi heel cup
- Replaceable heel pad
$220.00
$325.00
32% Off
The Genius 10 Mega Road Cycling Shoe doesn't mess around when it comes to rigidity and speed. It's built for superb power transfer so we never feel like we're wasting watts, and complete with a nylon and injected carbon fiber sole for lightness and stiffness. The "Mega" range is designed around a higher volume shoe for wider feet. A reinforced heel cup keeps our feet from sliding around, and Sidi's dial system allows for micro-adjustments so we can customize our ideal fit.
$100.00
$260.00
62% Off
Padded tongue, micro-lock buckles, two VELCRO® brand closure straps, and molded heel cups combine to provide excellent fit adjustment
Arch compression straps hold feet securely
Airplus insoles provide added padding and breathability
SIDI Millennium II road soles offer rigidity for power transfer and excellent aerodynamics; replaceable rubber heel tab
Compatible with all major pedal systems; adapters sold separately
Imported.
$130.00
$260.00
50% Off
MILLENIUM 5 SOLE
- The redesigned MILLENNIUM 5 SOLE is constructed from injected carbon fiber in a nylon matrix. This infusion of carbon fiber in the nylon increases sole stiffness and durability, ensuring optimum performance in the face of prolonged use and temperature changes.
CALIPER BUCKLE
- SIDI’s TECHNO-3 PUSH dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI’s famously reliable and replaceable closures are improved by an all new proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most SIDI small parts, the TECHNO-3 PUSH buckle is serviceable and replaceable. It can be adjusted while riding, thanks to an innovative button which can be pushed to lift the buckle and facilitate the adjustment.
SOFT INSTEP CLOSURE SYSTEM
- The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable.
HIGH SECURITY VELCRO
- HIGH SECURITY VELCRO straps with integrated locking polymer teeth, that engage onto each other when the strap is closed. This feature makes the closure more secure and the strap becomes unmovable.
SIDI HEEL CUP
- Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash.
REPLACEABLE HEEL PAD
- For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad.
$175.00
$250.00
30% Off
- Upper: Politex suede effect, mesh, upper drilled on the inside. The "Politex” material is constructed of several overlapping layers with different physical mechanical properties. The compacted PVC is then coupled to two fabrics (knitted fabric + felt) that is then film dyed for long-lasting color retention. "Politex” offers strong resistance to ripping, laceration, stretching and fading. "Politex” is made in strict compliance with European regulations and is a totally "green” product.
- Has been specifically studied for this specialty, may be fitted with two toe spikes on the front for traction in difficult and muddy conditions. The toe spikes are sold separately.
- Polyurethane shock absorber on the external area with inner padding.
- Abrasion-resistant material on the toe.
- Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash.
- Sidi's Techno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. Sidi's famously reliable and replaceable closures are improved by an all-new proprietary Sidi Wire material that is completely non-binding for intuitive and effortless on the-fly adjustments.
- Like most Sidi small parts, the Techno-3 System is serviceable and replaceable.
Page 1 of 6
Next page