Other

Ursus BIG FOOT center-mount kickstand is an alloy double kickstand and has the capacity to hold up to 110 lbs. Suitable for bikes with extra cargo or a child seat. The plastic feet attached to the BIG FOOT kickstand is extremely strong and prevents the stand from slipping while in use. BIG FOOT is designed to work with 28" wheeled bicycles.

Specifically, fit for the Solace eRide and Solace Gravel eRide, it will ensure high stability and strength while offering a clean outlook by not overpassing the back wheel axle. KEY FEATURES - Fits to SCOTT Solace eRIDE - Fits to SCOTT Solace Gravel eRIDE - 2-bolt chainstay attachment - 25kg max load

Surly's Junk Straps can secure almost anything to almost anything else. Essentially an extra long toe strap, they're easy to use and store. And, trust us, these handy straps will get used often.

Nylon beaded cable ties - 8-inch - Reusable

Nylon cable ties - 8 inches long

2-bolt dropout mount, allowing a bike to be kept upright. - Made of durable aluminum - Compatible with: Crosstrail and Ariel A1 Disc bikes (up through MY14) - 2012-2014 Hardrock and Myka models - Crossroads and Expedition models (up to MY13) with 2-bolt dropout mount

This plug-in throttle mounts next to your HMI on your Globe bike and allows you to motor up to 20mph without needing to pedal. Need to go faster? Pedal assist will still be there to give you a boost to 28mph after the throttle reaches its limit. The throttle’s extra burst of torque makes entering and exiting traffic safer and faster but still allows you to use pedal assist to increase efficiency and range. - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Max throttle speed: 20mph. Does not affect pedal-assist performance or top speed. - Requires installation of the free Globe phone app to activate.

This bike kickstand was developed specifically for the Turbo Tero, allowing you to keep your bike upright on its own. If you need to complete your kit or replace a bike kickstand, this two-bolt dropout mount kickstand will do the job for you. Turbo Vado, Como, and Tero EQ come already equipped with a kickstand. - Durable aluminum construction. - Simple, two-bolt dropout mount allows for easy assembly. - Fits 40mm adapter plates. - Length: 362mm

Turbo Chainstay-Mounted Kickstand - 323mm.

Skratch Labs’ Feed Zone Portables Cookbook gives you real, delicious, and easy-to-make fuel for your next ride. Chef Biju Thomas and Dr. Allen Lim—a physiologist who has done extensive work with Pro Tour teams—teamed up to give you 75 simple recipes for food that travels well, tastes amazing, and gives you the energy you need to keep riding. The book focuses on delivering the right blend of macro and micro nutrients for training athletes in simple, flavorful recipes.

Fueling yourself correctly at home is one of the most crucial aspects of athletic performance and all-around health. Skratch Labs’ Feed Zone Cookbook has 150 easy-to-follow recipes that are designed to give endurance athletes like you just what you need. Chef Biju Thomas teamed up with physiologist Dr. Allen Lim, whose time spent working with Pro Tour teams led to many of these delicious, healthful recipes. The Feed Zone focuses on delivering the right blend of macro and micro nutrients when you need them in simple, flavorful recipes.

8 sets of SKS Breakaway Mount Eyebolt and Nut Set

Cannondale Headshok Adaptor for the SKS Shockboard Fender

SKS Raceblade Long Hardware Kit compatible with 2014 and prior models.

Replacement SKS Rubber Straps for RacebladePro and S-Board

Safety release clip for SKS bolt-on fenders with 3.4mm stays. Typically found on Chromoplastic Longboard and various OEM and Bluemel fender models.

Front and Rear SKS V-Brace Fender Stay Set with Drawbolts

- A Threadless no tap install option that lets you store the EDC V2 Tool inside your stem/steerer tube without threading your steerer tube - The Threadless Carrier replaces your star nut and lets you preload your headset with a bolt, while also creating a space for the EDC Tool. - Easy to install in less than 10 minutes. - Compatible with EDC V2 Tool (You must use the small EDC V2 Storage Capsule with the Threadless Carrier.) The tire plug and bacon strips fit within the small storage capsule. - Chain pliers are not compatible with the threadless carrier set up. - The EDC Threadless Carrier is NOT compatible with V1 EDC Tools (Green Multi-Tool)

- EverClear Roll is 12 micrometers (µm) thick and offers 2 x 60-inches of high-quality protection film - It's designed to protect your frame against anything from rock chips to cable rubs and everything in-between. - Included is a sheet large enough to cover your down tube, top tube, chain-stay, cable rub points and crank arms. Also works great for fork lowers, shock bodies, and more! Especially great for protecting carbon frames or decals. - It’s easy to cut and apply—simply trace and cut your desired pattern(s), clean your surface, and apply where necessary! - Want to boost re-sale value of you bike? EverClear is your ticket! By applying this stealthy 12µm protection to your frame when it’s new, you can preserve that new look without using any bulky and ugly frame protection. Then, when it’s time to sell, you can remove the EverClear, and you are left with a beautiful like-new bike that’s ready to get top dollar in re-sale. - Made in the USA

- EverClear is an 8-micrometer (µm) high-quality frame protection film - Each sheet is 2-feet x 8-inches. - It's designed to protect your frame against anything from rock chips to cable rubs and everything in-between. - Included is a sheet large enough to cover your down tube, top tube, chain-stay, cable rub points and crank arms. Also works great for fork lowers, shock bodies, and more! Especially great for protecting carbon frames or decals. - It’s easy to cut and apply; simply trace and cut your desired pattern(s), clean your surface, and apply where necessary! - Want to boost re-sale value of you bike? EverClear is your ticket! By applying this stealthy 8µm protection to your frame when it’s new, you can preserve that new look without using any bulky and ugly frame protection. Then, when it’s time to sell, you can remove the EverClear, and you are left with a beautiful like-new bike that’s ready to get top dollar in re-sale. - Made in the USA

Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 55mm wide x 269mm long - 14 mils thick polyurethane for durability - UV Resistant

Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 2 large and 2 medium patches - 3 small frame protectors - 2 large frame protectors

Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 64mm wide x 305mm long - 3 Extenders included for desired protection

Ride with minimal chain slap by using a Chainstay Protector. Comes in 5 sizes and 4 colors giving you the versatility needed no matter what you ride. Designed and made in our Utah facility, the Chainstay Protector is made with neoprene and sewn with a tight stitch and heavy-duty thread for extra strength and durability. Lizard Skins chainstay guards are the original, strongest and lightest protectors on the market since 1993.

Greenfield kickstand parts.

Greenfield Kickstand Parts.

Greenfield's Rubber Foot attaches to the bottom of the kickstand for added support on soft and slippery surfaces. It also prevents the kickstand from scratching your flooring. The Rubber Foot fits all Greenfield kickstands and many others, too.

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

This kit includes a Greenfield center-mounted kickstand as well as a mounting plate that's designed with a cutaway to clear derailleur cables. The kickstand is lightweight, durable, and looks great on any bike. It's made of aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface