Components

Designed for 104 BCD Mountain Cranksets. The proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the benefits of an oval ring without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. - The simplest way to explain the way these rings feel is having 2 teeth less in the weak part of your pedal stroke and 2 teeth more where you have the most power - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life - These rings are threaded, use with 10mm chainring bolts - 48mm - 50mm chainline depending on the crankset

More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth PowerTrac Elliptical (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112 degree) than competitors versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. Compatibility - These rings fit on the Shimano XT M8000, SLX M7000, Deore M6000, or FC MT5100 1x or 2x cranksets. - Use only the stock Shimano XT M8000 or SLX M7000 chainring bolts - These CAN be mounted to the XTR 9000 series cranks, but you will have to use the bolt caps that come with that crankset and you will need to file roughly 1mm off the threaded boss on each bolt cap (they are a little too long and don't allow the ring to be tightened down). - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). - Provide a great chainline on most boost bikes - Must use the stock chainring bolts. The Wolf Tooth chainring bolts are a different size. - Ovality of 10% and timing of 112 degree after TDC (top dead center) - Maximum diameter is that of a chainring 2t bigger than the size you order so be sure there is adequate chainstay clearance. Specifications: - Chainline: 49mm - Boost Crankset Chainline: 52mm - Mount type: 96 BCD for Shimano M8000 and M7000 - Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains

Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. - Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life - Use of a clutch-style rear derailleur is recommended - 52mm chainline / 3mm offset for boost spacing

Wolf Tooth ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and more. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look. - Designed to work with rear (right side) brakes and shifters - Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters - For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque - 6061-T6 aluminum - ISEV-ISII is for a Shimano I-SPEC EV shifter mounting to a Shimano I-SPEC II brake

Wolf Tooth Supple handlebar tape is extra-thick, extra-wide, extra-soft, and extra-tacky. Designed for the abuse of unforgiving trails, the 40mm wide tape can be tuned for additional thickness by wrapping with increased overlap. - 5mm thick, 100% silicone is washable, resistant to wear and packing out - Self-fusing silicone finishing tape included for a clean finishing touch

Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm. Dual-Concave Profile: - Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side. Extra Grip: - Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts. Shaped with Purpose: - The shape of Waveform Aluminum Pedals matches the footprint of your shoe Reliable Performance: - Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Tapered Edges: - Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain Two sizes: - Large: 112mm x 106mm - 384g - Small: 105mm x 99mm - 373g Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

Made in the USA, BlingKits add a dash of style and color to any bike in an easy to manage package. - Includes a 3mm, 5mm,10mm,15mm headset spacer and integrated 5mm top cap - Includes 2x sets of anodized to match bottle cage bolts

Made in the USA, BlingKits add a dash of style and color to any bike in an easy to manage package. - Includes a 3mm, 5mm,10mm,15mm headset spacer and integrated 5mm top cap - Includes 2x sets of anodized to match bottle cage bolts

Made in the USA, BlingKits add a dash of style and color to any bike in an easy to manage package. - Includes a 3mm, 5mm,10mm,15mm headset spacer and integrated 5mm top cap - Includes 2x sets of anodized to match bottle cage bolts

Made in the USA, BlingKits add a dash of style and color to any bike in an easy to manage package. - Includes a 3mm, 5mm,10mm,15mm headset spacer and integrated 5mm top cap - Includes 2x sets of anodized to match bottle cage bolts

Made in the USA, BlingKits add a dash of style and color to any bike in an easy to manage package. - Includes a 3mm, 5mm,10mm,15mm headset spacer and integrated 5mm top cap - Includes 2x sets of anodized to match bottle cage bolts

Made in the USA, BlingKits add a dash of style and color to any bike in an easy to manage package. - Includes a 3mm, 5mm,10mm,15mm headset spacer and integrated 5mm top cap - Includes 2x sets of anodized to match bottle cage bolts

Gnarwolf Chainguide

Gnarwolf Chainguide

Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain.

The ReMote BarCentric is a dropper lever option for bikes with front shifters, lockout levers, or e-bike controls. The slender design of the ReMote BarCentric allows it to easily fit between the left grip and levers with four potential lever positioning options to avoid any interference with existing levers. This dropper lever has a ring shape that encompasses the handlebar, while also serving as a pivot point to provide the rider with extra leverage, making it easier to press the lever. - Compatible with left side controls including 2x shifters, suspension lockout levers, and under-bar e-bike controls - Large, smooth, sealed Enduro ball bearing that encircles the handlebar - Clean and efficient cable routing flows around disc brake levers - Adjustable reach for ideal ergonomics and controls clearance - Compatible with all cabled actuated dropper posts - Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post - Works with any mountain bike handlebar - Can be rotated to your preferred position

Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility

Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility

Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility

Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility

The Wolf Tooth ReMote Pro is the most adjustable and refined dropper lever. It can be moved laterally along the handlebar and rotated around the handlebar as can be done with all dropper levers, while also allowing for 48 deg of rotation to set the lever starting point, independent of cable tension – no other dropper lever allows for this to be adjusted. ReMote Pro also has a cable pulley with a cam (oval) shape that provides more leverage at the beginning of the lever throw; this is when dropper posts need more force to open the fluid reservoir valve that allows the post to move. And just like other Wolf Tooth dropper levers, ReMote Pro features a large sealed custom bearing and is machined at Wolf Tooth in Minnesota, USA. - Machined surface of paddle provides extra grip - 6061 T6 aluminum construction with Delrin axle - Large sealed cartridge bearing is shielded from the elements - Stainless steel bolts for unprecedented adjustability - Cable clamp won’t pinch or bend cable - Integrated barrel adjuster is the only plastic component - Compatible with all cable-actuated dropper posts - Various clamp options to integrate with brakes from popular manufacturers

ReMote Dropper Lever - Lever pivots on a 21mm ball bearing for smooth operation - Cable Kind Clamp does not damage secured cables and features captive hardware. - Includes barrel adjuster for on the fly changes - Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash.

The RoadLink DM (Direct Mount) is the RoadLink designed to fit Shimano's current generation R8000 Ultegra and R9100 Dura-Ace rear derailleurs. It serves as a simple device to offset the position of the rear derailleur, making it possible to run a wide-range mountain bike style cassette. It's an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - Fits Shimano R9100-generation Dura-Ace and R8000-generation Ultegra rear derailleurs - CNC machined from 6061-T6 aluminum with stainless steel bolt - Does not change the derailleurs total chain wrap capacity - Fits standard derailleur hangers only - Best used with Single or Double Setups - see manufacturer's site for more details

Roadlink Rear Derailleur Part - The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes - 11-42 or 10-42 setups are not supported - Works with all 10-11 speed Shimano and SRAM Road Derailleurs - Best used with Single or Double Setups - see manufacturer's site for more details

The Tanpan brings the range and security of Shimano mountain rear derailleurs to Shimano-equipped drop-bar bicycles. This means a greater gearing range for bigger adventures, better chain security for rough terrain, and lighter weight and reduced complexity for the daily commute. In order to deliver these benefits, the Tanpan amplifies road shifter cable pull to allow for seamless communication with mountain derailleurs. The result is ideal for riders looking to convert their road, gravel, cyclocross, or commuter bike to the simplicity and light weight of a single chainring. - Not Compatible with Tiagra 4700 - Compatible with most road, CX and gravel bikes - Designed to mount directly to adjuster-free cable stops on Shimano rear derailleurs - Certain chainring and cassette configurations benefit from a Goatlink - If the rear derailleur cable is routed internally through the chainstay and exits at the end of the chainstay above the axle or past the axle out the very end, you will need to utilize the inline ferrule

Valais Dropper Post Seat Bag Adapter - Allows the usage of seat packs on a dropper post - Protects the dropper stanchion from wear and grit - Can act as a travel limiter when full drop isn't needed

Connex S0 chains are made of high strength alloy steel. Their chamfered plate design offer precise, lightning-fast shifting, ideal for both road and MTB riding. - Alloy steel inner and outer link plates - Compatible with Shimano, SRAM and Campagnolo 10 speed drive trains - 5.9mm pin width - Reusable Connex master link included Connex sX chains are nickel plated for durability. Their chamfered plate design offer precise, lightning-fast shifting, ideal for both road and MTB riding. - Stainless steel inner links, alloy steel outer links, both electroless nickel-plated - Compatible with Shimano, SRAM and Campagnolo 10 speed drive trains - 5.9mm pin width - Reusable Connex master link included

The Whisky No.7 Seatposts are made from the highest quality materials to be durable, lightweight, and comfortable. Whether you’re remounting during the cross race, or abusing them on the trail, you can trust Whisky’s seatposts. Available in different diameters and offsets. - Convenient finger adjustment of saddle angle - Unidirectional carbon shaft, forged aluminum head - No rider weight limit - 5 year Whisky warranty - ASTM Condition 3 - For rough off-road riding and jumps less than 24"

Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.