Handlebar Grips/Tape

- Adhesive backed, 100% cotton, braided, reinforced edges

Specialized's BG Bar Phat w/Tape is a complete system that boasts advanced cushioning to keep you comfortable and protect your hands. It's comprised of adhesive gel pads and suede tape that's wrapped over them to provide the ultimate in comfort and control. In fact, tests have shown that the 4.5mm-thick pads reduce pressure by 50%!

Specialized's BG Contour Locking Grips are medically designed with an ergonomic shape that offers excellent support and protection, while the soft-density outers provide an outstanding grip and superb comfort. Available in two sizes for a perfect fit, the Contours also include locking clamps to keep them in place on your handlebars.

Specialized's Contour XC Grips were designed with your hands in mind. Engineered in conjunction with a hand surgeon, these grips relieve hand pressure to keep you feeling great. So not only do you get cushy comfort and a great grip on the bars, you also stay in total control. These grips lock on to your bars so you know they'll stay put.

Specialized's Enduro XL Locking Grips boast an oversize diameter for maximum control in even the most challenging situations. Their soft-density, textured outers provide an outstanding grip and superb comfort, while the firm inners and locking clamps built into the ends keep the grips securely in place on your handlebars.

This dual-color, triple-density, synthetic leather tape provides a tacky grip and superior vibration damping. - Easy-to-clean, synthetic leather top layer. - EVA vibration-damping foam takes the sting out of harsh terrain. - Easy-stretch with feathered edges, plus adhesive backing, for a smooth wrap. - Bar end plugs included.

When you look at the start line of a race that's bound for rough roads, you're sure to see bar upon bar wrapped in cork tape. Why? Because it's tough to beat the vibration absorbing properties of this natural material. With the Specialized S-Wrap Cork Handlebar Tape, however, we managed to do one better. It features a dual-density design that pairs cork with EVA foam tape, and the result of this is an incredible reduction in hand fatigue. They also gave it an elastomer gel backing to heighten the aforementioned, as well as overall comfort. And for easy installation, they kept everything highly stretchable and low in profile. - Low-profile cork/EVA foam tape is sleek and comforting over rough roads. - Elastomer gel backing provides additional comfort and vibration damping. - Easy-stretch tape with feathered edges creates a smoot, low profile wrap. - Bar end plugs included.

Specialized's heavy-duty, triple-density S-Wrap HD Tape looks good and feels great. Its high-grip, diamond-textured outer surface provides outstanding handlebar feel, while the gel backing damps vibrations for protection and comfort.

Specialized's heavy-duty, triple-density S-Wrap HD Tape looks good and feels great. Its high-grip, diamond-textured outer surface provides outstanding handlebar feel, while the gel backing damps vibrations for protection and comfort.

Specialized's S-Wrap Roubaix Handlebar Tape boasts a stylish suede finish and elastomer gel cushioning for awesome vibration damping and comfort.

Specialized's SIP Locking Grips have the grip you need when you're throwing down on the trail. Featuring a super-tacky, durable material and strategically placed, moto-inspired waffle pattern, these lock-on grips deliver optimum comfort and maximum control. Available in two sizes for a perfect fit, the SIPs also are also easy to color coordinate with your rig.

Wrap your handlebars in comfort, luxury and style with Salsa's Gel Cork Tape. It's made from cork with a vibration-damping gel backing and is embossed with the Salsa logo. And, with a variety of palette-pleasing colors to choose from, you're sure to find your favorite one!

Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance.

Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance. They fit RED 22, Force 22 and RED 10-speed ErgoDynamic shifters.

Keep your bike looking good with SRAM's HydroR Lever Hoods. They're made of a soft, grippy rubber and are a great replacement hood for HydroR levers.

The 711 MTB Tech and Trail Grip features perfect grip ergonomics for long-distance routes and use in racing on sports-oriented mountain bikes. A well thought-out, highly ergonomic shape offers an especially secure grip and comfort. The outer contact area is less rounded (flattened). The flattened area raises slightly towards the outside for support. Based on the natural contour of the hand on a grip, contact is drawn forward and slightly rearward. The clamp is located inside and the clamping sleeve at the (inner) third of the grip. This increases the shock absorption and comfort on the hand’s outer side. The flat angular bottom offers a perfect form fit. The design organically flows with your palm and fingers providing the ideal interface and optimal cushioning. 711 offers extended pressure distribution and hand support compared to a wing design that supports only the outside of your hand. The grip can be squeezed less tightly because it fits better. Various rubber compounds ensure a perfect grip level and high comfort. We only use the best possible materials to avoid sticky/gummy rubber. The end of the grip is closed, so no plugs are needed. As round as necessary and as flat as possible! This grip is a bit more difficult to install because the clamping is inside and only on the inner third. Use a bit of brake cleaner to slip the grip onto the handlebar very easily and it tightens up very quickly. - Weight (g) / pair: 128, 150, 186 - Diameter at Smallest Point (mm): 91, 101, 106 - Material: Proprietary Rubber Blend

Profile Design's Bar Wrap is a synthetic handlebar tape that offers a nice grip, padding for comfort and that comes in many colors and designs to add some bling to your road bicycle. It's also stretchy and extra long for easy installation, and durable, too.

Pretty much everyone has lost the plugs from drop bar bikes. It's obnoxious. These plugs, however, have two elastomers that expand when tightened, keeping them secure within the bar. - Fit bars with 18-20mm inner diameters - Installs with a 3mm hex wrench - Outer diameter of plug measures: 25mm

• Silicone material for improved grip in all conditions • Excellent shock absorbtion • Offset geometry for increased comfort and a lower weight • Avaibable in 30mm (Slim) and 32mm (Standard) thickness • Length 130mm • Weight from 55 g.

Pro's Smart Silicon Handlebar Tape is soft to the touch for top comfort. Plus, it's made of EVA foam for an excellent grip and total control even in the wet. This great tape is also durable and features adhesive backing for easy wrapping and a stay-put hold.

- Thick profile and raised square blocks with a sticky feel - 98 grams

Oury single compound grips. Simple & classic. - Soft grips with raised blocks - Flange: No - Lock On: No - Grip Shift Specific: No - Length: 114 mm - Shape: Round - Weight: 141 g

Shock absorbent EVA foam - Adhesive back with tapered edges - Handlebar plugs included

Origin-8's Pro Cork Handlebar Tape is made from real cork and features an adhesive backing. The tapered edge gives you a smooth, comfortable wrap that feels wonderful. And, you'll also get a set of handlebar plugs to finish the job.

- Zig Zag pattern provides comfort and grip with or without gloves - Dual lock rings securely attach grip to bar - Outboard lock rings have replaceable integrated bar end caps - 130mm length with 30mm diameter grip area

A low profile single lock on grip, designed to reduce arm pump and hand numbness. The Diamond knurled texture, with saw tooth finger ramps and a super tacky 20A compound provide ultimate traction. More traction means less death-gripping the bars and less arm pump. Our single lock has the profile of your favorite double lock-on. But to reduce hand numbness we've replaced the hard outer clamp with extra rubber for greater cushioning of your palm heel. Get all the benefits of an “ergonomic” grip without the city bike cruiser look! SPECS Weight: 97g (Pair) Length: 136mm Diameter: 30mm

- Aluminum clamps secure the grip on both ends using a hex wrench - Loosen pinch bolts and grips slide on or off with ease - 130mm length for standard shift/brake setup (not for twist shifters, use 90mm replacement grip options for twist shifters)

Two Southern California originals have teamed up to create a modern-day classic design. Featuring the classic Vans waffle sole pattern and constructed from ODI's proprietary grip compounds for a consistent feel that provides exceptional control in all conditions. Available as part of the patented Lock-On Grip System for guaranteed slip-free performance and simple installation. For MTB, BMX, ATV, and PWC applications. - Iconic Vans Waffle sole pattern utilizing ODI's proprietary grip compounds - Provides exceptional feel and control in all conditions - Aluminum clamps secure the grip on both ends using a hex wrench

Make every ride more fun and comfortable with Fizik's Bar Gel. It's placed beneath your handlebar tape (sold separately) to add padding and increase shock absorption. It's made from the same soft Technogel that's used in Fizik saddles, so you know this cut-to-fit Bar Gel will add a world of comfort.