Parts & Accessories

Revamp the look of your single speed cranks with some new hardware. Origin-8's Single Chainring Bolts give a high polished look to any crankset. The anodized finish comes in multiple colors to highlight your crank and makes it look as good as you do. You can also choose between steel or aluminum bolts. • Set of 5 male/female bolts • Inside measures 4mm when tightened, 7mm total height

This very light, stiff, and strong carbon crank spider optimizes your power transfer. - Stiff and lightweight. - For use with S-Works carbon road cranks.

vendor part #: 11.6900.002.160 UPC: 710845614422 fits: GXP bolt/cap size: M15/M26 (alum) color: black UOM: each Crank bolt and self-extractor cap with washer (sold each or in pairs depending on application)

With the SXg, MRP delivers a guide without compromise and with no equal. No longer does the desire for protection and both upper and lower retention have to come at the expense of weight, efficiency, or the addition of moving parts - have your cake and eat it too. With the SXg covering all those bases, it’s the first guide in history that’s equally at home on anything from aggressive, short-travel bikes to Armageddon-ready Rampage rigs, and everywhere in-between. It’s a guide that refuses to be pigeon-holed, blurring the lines between typical industry definitions - a little country and a little rock, as they say. But, in this case, it’s a whole lotta rock. High-security chain retention and bulletproof chainring defense in an innovative, lightweight package with zero efficiency loss make the SXg ideal for a wide range of uses. Whippersnapper™ technology provides lower retention without moving parts or friction. The most advanced chainguide on the market, the SXg is the go-to of the top Rampage stuntmen, World Cup downhill pilots, and superhuman enduro tacticians. - Whippersnapper™ lower guide. - Full-size, nylon HD upper guide with co-molding. - Integrated SX skid provides safeguard to the chainring and glides over rocks and obstacles. - Nylon and TPU co-molding in the Whippersnapper™ provides durable protection from external blows and mutes internal contact with the chain. - Swingset™ hardware. - All installation and adjustment operations are possible with just a single 4mm HEX wrench. - Available in 30-34t and 34-38t sizing. - Alloy guides compatible with chainlines 49mm and wider, carbon 50mm and wider. Boost 148 compatible. - ISCG-05 only. - 149g (34-38t Alloy ISCG-05)

- Dual ring chainguide with 6061-T6 backplate and removable direct mount bashguard - Replaceable upper sharkfin wearplate prevents chain drop and allows front shifting - Dual-position lower roller provides chain tension and security - Includes both 32-36t and 36-40t direct-mount bashguards - ISCG-05 models are adjustable for 48-53mm chainlines - 149g - Range: 32-40t

The Wheels Manufacturing 386 EVO Adaptor for Shimano Hollowtech II Cranks adapts Shimano cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (2) - 24mm ID adapters - (8 )- .7mm spacers

Wheels Manufacturing BBRIGHT BB30A and PF30A Adaptor for 24mm Spindle Cranks adapts 24mm spindle cranks (Shimano, FSA, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Also adapts Cannondale BB30a and PF30a frames to 24mm spindle cranks (Shimano, FSA, etc.). - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 48g/pr

Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for double and triple chainrings, each set includes 5 male/female bolts to securely connect your chain rings to the crank. Available in black and silver, as well as aluminum or steel.

- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles

Wheels Manufacturing 2.5mm Black Aluminum Bottom Bracket Spacers are for adjusting chainline or bearing play in English (BSA) or Italian threaded bottom brackets.

Race Face CINCH Crank Puller • Puller cap for Cinch model Race Face cranks only, including Next SL, SixC and Turbine • Puller cap utilizes 16mm hex key • 26mm thread

- Preload collar for adjusting tension on bottom bracket bearings - For Race Face 30mm Cinch System cranks only

The Wheels Manufacturing BBright Press Fit Bottom Bracket Adaptor for GXP Cranks adapts 24/22mm cranks (SRAM, Truvativ, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 8g/pr

- Sunlite Cottered Pins

• Square taper interface • Only includes left crank

Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. for use with SRAM DUB cranks - 10 spacers per bag - Machined engineering-grade Delrin

Shimano Chainring Bolts - For use with M9000 chainrings

Problem Solvers Crank Arm Fixing Bolts - 8mm - Sold as a pair

Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10

SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact. - Injection molded plastic crank arm protection - Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes - Material: Injection molded plastic - Recommended Group: XX1, X01, XX, X0

SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact.

The Easton Spider and Ring assembly features the Cinch Direct Mount System, making a swap between ring configurations a fast and simple procedure. This system also provides a significant weight savings by eliminating the material overlap and extra bolt hardware that is required for a traditional spider with chainring configuration. - EA90 Aluminum

Race Face Cinch aluminum crank arm bolt. 18mm, fits XC/AM cranks.

The Wheels Manufacturing 386 EVO Adapter for 22/24mm Spindle Cranks adapts SRAM/Truvativ cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (1) - 24mm ID adapter (for right-side) - (1) - 22mm ID adapter (for left-side) - (8) - 0.7mm spacers

The Wheels Manufacturing PressFit 30 Bottom Bracket Adaptor for Shimano Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter

Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks