Racks & Baskets

B-RAD Half Bottle Mounts allow for cargo customization and cargo optimization. Designed to work in tandem with B-RAD Base, the Half-Bottle Adaptor moves the bottle over about half a bottle radius to make it easier to access. The Accessory strap mounts can be mounted to the other side providing a mounting point for additional items. - Mounts to the B-Rad base mount (not included

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts

B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads

Replacement hardware, bolts and nuts for Wald baskets. Works with Wald Basket models: 520, 520GB, 535 and 535GB

By using the accessory bolt mounts on a frame or fork, the Wald Standoff kit allows the user to space a basket or rack away from other components that would otherwise be in the way, like disc brake calipers. - 2 Phillips head frame bolts in 1.5-inch (38mm) length - 2 Standoff spacers in 1-inch (25.4mm) length

Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket. - Simple design for easy use - Lightweight, yet sturdy - Steel rack w/adjustable brake bolt mount - Loading surface = 13" x 5" - Lightweight at just over 2 pounds

These are simple polished stainless steel struts which can be used to mount many of our racks to your bike's brake bridge or fork crown. Available in Small and Large sizes. - Small is 8.5cm long from end to end - Useful for mounting our Constructeur Rear Rack to your brake bridge. - Useful for mounting our Constructeur Rear Rack to your brake bridge. Also used for mounting our Randonneur, Constructeur Front, and Porteur Racks to your bike's fork crown. - Note: not required if you mount the rack to metal fenders, as is traditional.

Common on European utility bikes, a front wheel stabilizer makes loading front racks simpler. It is a spring connecting the fork to the down tube. It adds a subtle self centering action to the front wheel, making loading and unloading of a bike with a basket, or say, our Porteur Rack much easier. The spring also offers some resistance to steering, so it counteracts deflections from hitting potholes and road debris. - Mounts to the back of the fork crown via brake bolt or through bolt - Fork crown mount diameter is made to fit an M6 bolt - common on nutted calipers - Use Sheldon's Fender Nuts to work with recessed brake bolts - Rust resistant and includes all required brackets and hardware - Available for Small (31.8mm and smaller) and Large (38-62mm) sized downtubes

The VO Porteur Rack is a traditional-style rack as used on the famed Parisian newspaper delivery bikes. Those Parisian delivery bikes were reputed to carry as much as 110lbs. of newspapers on similar racks (of course, the bikes had strengthened frames and forks, not just racks). Our Porteur Rack is made from strong stainless steel tubing and polished to a lovely shine. It won't rust like painted steel racks or fatigue and crack like aluminum racks. The quality is actually superior to that of many custom racks. In short, this is a real load-carrying rack, not an aluminum "style-rack". Yet total weight with rail, nuts, bolts, etc. is only 1.079kg. The platform is about 36cm x 29cm. A removable rail attachment is included and very handy for smaller packages. The tangs are pre-drilled to fit 700c, 27", 26", and 650b bikes. There are four bosses for a light attachment. There is a boss for securing your fender to the rack -- no rattling! Please also note the elegant pannier/tie-down loops above the mounting tangs. Mounting hardware is included. The Porteur Rack mounts to the dropout eyelet and the brake bolt (or fork crown hole). Max weight with this configuration is 25 lbs.

The Tara is the most durable, most versatile lowrider rack Tubus makes. It has been Tubus' best selling front carrier for more than 18 years, and Tubus has been improving it along the way. It's incredible strength comes largely from its massive 14mm chromoly main tube and simple design. When used in combination with the Cargo, Tara is the perfect match for long-distance biking. - Separate eyelets for mudguard mounting are also included - For the fat tire applications, see the Tubus Tara Big Apple - Weight: 500 grams/17.6 ounces incl. hardware - Capacity: 15kg/33 pounds - Wheel Size: 26-inch/700c *Not suitable for mounting on suspension or carbon forks without eyelets. Be sure your fork is approved by the manufacturer, or by the bicycle manufacturer for the installation of a rack.

The travel-master Logo has been updated with 3-D feet with perfect force absorption and an integrated screw attachment. The super-light mounting parts for mounting the stays to the frame and klick spring clamp as well. The Evo has the typical lower rail of the Logo classic, lowering the center of gravity and improving the riding stability. - Weight: 730g/1.6 pounds - Carrying Capacity: 40kg/88 pounds

Topeak's Cargo Net works with the Trolley Tote or MTX Rear Basket (sold separately). Make sure your goods stay in place on those bumpy rides home!

For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.

Free Pack provides an alternative way to pack most inner tubes with a mini tool or CO2 cartridges for your ride. Mounts to saddle rail with included Duo Fixer which provides dual use with Topeak Duo Fixer system accessories, including Tubi tools, CO2 inflators, lights, and fenders. A simple slide and click is all it takes to go on a safe and secure ride. - Two tire levers included - Load with Inner tube (up to 29” x 2.6”) / Mini tool or CO2 cartridge - Max gear load 450g / 15.9oz - Compatible with steel, CroMo, titanium, and carbon standard saddle rails with 36mm width spacing and at least 30mm height spacing - Not compatible with monorail or spring type saddle rails - Upper mount position available for additional Duo-Fixer system accessories

Topeak Elementa tool/tube strap provides a minimalist, convenient way to carry your essentials. Individual straps hold tools, Co2 tubes and levers securely. The Elementa Strap can be attached to seat rails, top or down tubes, or anywhere else on the frame. - Attach to saddle rails, seatpost, or downtube with hook and loop fastener - Anti-slip and scratch-free fabric protects your bike

Omni QuickTrack Adapter attaches to a standard rear rack or Racktime* system platform allowing the use of popular Topeak TrunkBags and rear baskets. Adjustable mounting brackets fit rear rack widths from 90mm to 120mm with 10mm to 12mm rack tube dimensions. - Attachments: Rear rack deck - Material: Engineering grade polymer - Max Load: Limited to rack max loading rating - Size: 32 x 9.4 x 6.1cm - Weight: 230g / 8.11oz Compatibility - Fits rear rack without top plate and spring clip, - Rear rack width 90mm - 120mm, - Rack tubes, 10mm to 12mm diameter - Compatible with Topeak MTX / RX TrunkBags and MTX rear baskets *Racktime is a registered trademark of tubus carrier systems GmbH.

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

Fast and easy attachment of Topeak handlebar bags. - Clamp: Fits 25.4/28.6/31.8 mm Handlebars (shims included)

Topeak handlebar bag fixer for eBikes with display units.

Topeak's front basket handlebar fixer fits standard bikes or eBikes with display units. - Fits up to 1-inch handlebars

Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches

Boost the carrying capacity of your Topeak MTX BeamRack (sold separately) with their Dual-Side Frame. It enables you to attach panniers and other Topeak MTX bags to your BeamRack.

The Topeak Backloader Wishbone attaches to the saddle, and provides anti-sway for large saddle bags. In addition, the Wishbone has bottle cage mounts to allow 2 additional bottles to be carried. A handy accessory to add to your bikepacking repertoire that keeps the backloader or any large seat bag from swaying back and forth. - Fits rear bags 18cm/7" wide - Bottle cage bolts included, max load 4.4lbs - Mounts to any standard seat rails. Not compatible with monorail or spring/bumper saddles

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - 625g - 55lb weight capacity

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - Spring clip for additional cargo security - 800g - 55lb weight capacity

A lighter duty version for MTB and commuter use. QR mechanism is secure and easy to use. 7 kg (15 lb) carrying capacity. Compatible with all MTX TrunkBags. Includes hidden storage tray, rubber bungee and safety reflector. - Clamp: Fits 25.4/31.8 mm (shims Incl.) - Bag Compatibility: MTX TurnkBags - Material: Aluminum beam / Plastic cargo deck - Max Weight Capacity: 7 Kilograms - Size: 51 x 12.5 x 9 cm / 20.1” x 4.9” x 3.5” - Weight: 688 grams

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061 T6 alloy construction - To be mounted on bikes with disc brakes - 625g - 55lb weight capacity