Praxis Works M24 BB30/PF30 68mm Road
Details
This BB is for installing a Praxis M24 or SRAM GXP steel spindle crank in either BB30 or PF30 road frame.
COMPATIBILITY
FRAME TYPE : This specific press fit M24 bottom bracket is made to be installed in a 68mm BB30 or PF30 Road frame.
BEARINGS : Praxis M24 bottom brackets have a 24mm Drive and a 22mm NonDrive Bearing. These are specifically made for use with Praxis Road M24 spindle cranks or SRAM Road GXP spindle cranks. A drive-side wave washer is used for preload of the bearings.
TOOL : This specific M24 bottom bracket requires two 16 notch traditional BB tools along with a press tool/drift for installation. Please read the instructions carefully for installation. Use any standard outboard cup BB tool with 16 external notches and a 44mm ID
- For M24 / GxP steel spindle cranks being installed in a 68mm BB30 / PF30 road frame.
- Forged & machined heat-treated 7075 T6 Aluminum
- Enduro 2437 Drive /2237ER Non-Drive steel bearings
- 68mm version is only for Road. It cannot be used for MTN Frames/Cranks
- Ref Weight - 149g +/- with included sleeve
- GXP® is a registered trademark of SRAM, LLC
- INSTRUCTION MANUAL
Praxis warrants components to be free from defects in materials or workmanship for a period of 2 years after original purchase to the original owner.
However, there are limitations such as normal wear and tear…as “nothing lasts forever” so please read their full Warranty.
Reviews
