Filter By:
700c, 27-Inch & 650c

$996.00
Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all.
Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider.
The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits.
- New Zipp graphics and cosmetic identity that scream speed
- Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile
- Lighter weight than its predecessor, making it nimble and fast
- Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire.
- Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road
- 40mm rim depth makes a light and aero wheel in every situation
- Ships with 12mm end caps
- Center Lock rotor interface (lockring included)

$1,050.00
Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all.
Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. At the center of the 303 Firecrest Tubeless is a versatile and durable new hubset, the German-engineered ZR1 DB. This hubset features 66 points of engagement for quicker response.
The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits.
- New Zipp graphics and cosmetic identity that scream speed
- Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile
- Lighter weight than its predecessor, making it nimble and fast
- Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire.
- Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road
- 40mm rim depth makes a light and aero wheel in every situation
- Ships with 12mm end caps
- Center Lock rotor interface (lockring included)

$360.00
Take to the open road with the lightest, most durable, best-handling alloy wheel Roval has ever made - the Alpinist SLX. This is the pinnacle of alloy - a wheel so good it earned the Alpinist name.
There’s no room for excess weight whether you’re chasing summits or looking for ride quality. For the climbers, the wheels are stiff enough for high-powered efforts and feature confident handling. The newly engineered shot peen treatment increases fatigue life and with proven DT Swiss 350 hubs and Sapim spokes, the overall weight has been reduced by 30 grams. Because every gram counts.
LIGHTWEIGHT X RIDE QUALITY:
As the first-ever alloy product to earn the Alpinist name, the Roval Alpinist SLX wheels weigh in at 1,485 grams* thanks to premium alloy and a thoughtful build. Confirming what we’ve all felt: lightweight wheels feel better to ride.
*1,485 grams production sample weight. Final weights may vary slightly.
TUBELESS COMPATIBLE:
There’s no room for excess weight whether you’re chasing summits or looking for ride quality. A Shallow rim depth amplified by tubeless compatibility means you’ll get sublime ride quality with the added efficiency, comfort, and flat protection of tubeless tires.
RELIABLE PERFORMANCE:
Featuring confident handling for high-powered efforts, the newly engineered shot peen treatment increases fatigue life, while the proven DT Swiss 350 hubs and Sapim spokes enhance overall durability and performance.
- Rim: Alpinist Alloy, 6061 Alloy Shot-Pened, 700c, Disc Brake, Tubeless Compatible
- Rim Details: 24mm Depth, 23.5mm External Width, 20mm Internal Width
- Hub: DT Swiss 350 Straighpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub (Convertible freehub)
- Bearing Type: DT Swiss Sealed Steel Cartridge Bearings
- Spokes: Sapim D-Light Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 296mm, NDS: 292mm, Rear: Two-cross (1:1) 24 count, DS: 291mm NDS: 295mm
- Nipple: Sapim Secure Lock Double Square Alloy Blk, 2.0 x 18mm, 16cNm
- Max Pressure: 130psi
- Weight: Wheelset 1,485g, Front 694g, Rear 791g (excluding 15g, tubeless rim tape, and tubeless valve)
- Assembly Method: Hand-built
- Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit, Lifetime Warranty, System Weight Limit: 275lbs / 125kg

$440.00
Take to the open road with the lightest, most durable, best-handling alloy wheel Roval has ever made - the Alpinist SLX. This is the pinnacle of alloy - a wheel so good it earned the Alpinist name.
There’s no room for excess weight whether you’re chasing summits or looking for ride quality. For the climbers, the wheels are stiff enough for high-powered efforts and feature confident handling. The newly engineered shot peen treatment increases fatigue life and with proven DT Swiss 350 hubs and Sapim spokes, the overall weight has been reduced by 30 grams. Because every gram counts.
LIGHTWEIGHT X RIDE QUALITY:
As the first-ever alloy product to earn the Alpinist name, the Roval Alpinist SLX wheels weigh in at 1,485 grams* thanks to premium alloy and a thoughtful build. Confirming what we’ve all felt: lightweight wheels feel better to ride.
*1,485 grams production sample weight. Final weights may vary slightly.
TUBELESS COMPATIBLE:
There’s no room for excess weight whether you’re chasing summits or looking for ride quality. A Shallow rim depth amplified by tubeless compatibility means you’ll get sublime ride quality with the added efficiency, comfort, and flat protection of tubeless tires.
RELIABLE PERFORMANCE:
Featuring confident handling for high-powered efforts, the newly engineered shot peen treatment increases fatigue life, while the proven DT Swiss 350 hubs and Sapim spokes enhance overall durability and performance.
- Rim: Alpinist Alloy, 6061 Alloy Shot-Pened, 700c, Disc Brake, Tubeless Compatible
- Rim Details: 24mm Depth, 23.5mm External Width, 20mm Internal Width
- Hub: DT Swiss 350 Straighpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub (Convertible freehub)
- Bearing Type: DT Swiss Sealed Steel Cartridge Bearings
- Spokes: Sapim D-Light Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 296mm, NDS: 292mm, Rear: Two-cross (1:1) 24 count, DS: 291mm NDS: 295mm
- Nipple: Sapim Secure Lock Double Square Alloy Blk, 2.0 x 18mm, 16cNm
- Max Pressure: 130psi
- Weight: Wheelset 1,485g, Front 694g, Rear 791g (excluding 15g, tubeless rim tape, and tubeless valve)
- Assembly Method: Hand-built
- Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit, Lifetime Warranty, System Weight Limit: 275lbs / 125kg

$1,100.00
From the purist gravel racer to the mixed-surface fanatic, Terra CLX II provides a level of weight savings and material confidence that’s unheard of in the all-road or gravel space. This tier of weight-savings translates to rocket-like acceleration off the starting line, nimble performance in the hills, and unleashed efficiency on those loaded-down long-haul excursions.
Weighing in at just 1250 grams, the Roval Terra CLX II are the lightest wheels in their class, rivaling pure climbing wheels in terms of weight and out-performing in raw toughness. We were able to get even lighter than before (50 grams lighter) by utilizing Low Flange Disc (LFD) hubs, borrowed from the Alpinist CLX II wheels.
What’s being carried forward from the previous generation, is the rim. With its multiple Unbound victories, we we kept what was already class leading, and extended our lead. Because Terra CLX II is a hooked rim, you’re able to ride almost any tire and pressure. Thanks to the 25mm internal width, they work seamlessly with 28-47c tires (up to 80 PSI), giving you options to customize your setup for what’s ahead. Using Roval LFD hubs, still spinning on DT Swiss 180 hub internals, Terra CLX II continues to provide flawless ride quality. The CINC ceramic bearings inside do some serious heavy lifting when it comes to the efficiency of these wheels.
Even with laundry list of demands that need to be met for the serious gravel racer, to the all-road explorer—the Roval Terra CLX II checks every box with authority.
- Rim: Terra CLX Carbon Clincher, 700c, Disc Brake, Tubeless Compatible
- Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width - ERD 577mm
- Hub: Roval Light Hub (LF13/LF14R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub
- Bearing Type: DT Swiss SINC Ceramic Bearings
- Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 21 count, DS: 278mm, NDS: 290mm, Rear: One-cross/Two-cross (2:1), DS: 290mm NDS: 288mm
- Nipple: DT Swiss Hex Prolock Al 2.0x14mm
- Tire Size: 28mm - 47mm - Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi
- Weight: Wheelset 1,250g, Front 570g, Rear 680g (excludes 15g, tubeless rim tape and tubeless valve)
- Assembly Method: Hand built at every step, from rim layup to the last nipple turn.
- Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

$175.00
The Shimano WH-RS100 wheels with its wide 17c aluminum clincher rims offers comfort and versatility at a low price. Technologies derived from higher-quality wheels ensure that the model is as reliable as it is affordable. For example, the sealed cone bearing system ensures smooth running and long durability. The freehub body made of steel accommodates 8-11 speed cassettes. Round stainless steel spokes complete this sturdy wheel for training and everyday use. WH-RS100-CL is designed for classic rim brakes and quick releases skewer mounts.
SPECIFICATIONS
Intended Use: Road
Model: WH-RS100
Wheel Diameter / ISO: 700c / 622
Speeds: 8-/9-/10-/11-speed
Front Hub Spacing: 9x100
Rear Hub Spacing: 10x130
Axle Type: QR
Type: Clincher
Spokes: Front 20h / Rear 24h
Bearings: Cup & Cone
Freehub Body Material: Steel
Body Material: Aluminum
Brake Type: Rim Brake
Rim Width: 17mm inner / 23.2mm outer
Rim Height: 24mm
Valve Hole Diameter: Presta (6.5 mm)
Recommended Tyre Width: 700c 23-32c
Rim Material: Aluminum
Rim Joint: Sleeve
Weight: 1932g Set
Rim Tape: Included
QR Skewers: Included
FEATURES
- wider rim for more comfort and reliability
- improved stiffness of the drivetrain
- easy maintenance
- sleeved rim joint
- rear offset rim
- painted hubs
- cone bearing system (polished/CBN)
- contact seals
- steel axles (front 108 mm, rear 141 mm long)
- quick release made of aluminium (quick release length front 133 mm, rear 163 mm)
- rim tape required (18-622, incl.)

$280.00
The Shimano WH-RX010 Cyclocross/Road Disc Wheelset 700c
offering all the technology of Shimano wheels at an economical price.
Easy to use Centre-Lock rotor mount for use with disc brakes. 28 stainless steel bladed straight pull spokes with a 2-cross lacing pattern improve lateral and torsional (power transmission) rigidity. The hub uses angular contact bearings designed to cradle the balls giving both radial and lateral support for superior strength and durability in real world riding conditions. They also offer precision bearing adjustment and easy maintenance. Labyrinth and contact sealing - low-friction seals effectively shut out water, mud and dirt without affecting rotational smoothness.
Intended Use: Cyclocross/Road
Model: WH-RX010
Wheel Diameter / ISO: 700c / 622
Speeds: 10-/11-speed
Front Hub Spacing: 9x100
Rear Hub Spacing: 10x135
Axle Type: QR
Type: Clincher
Spokes: Front 28h / Rear 28h
Hub Seal Type: Contact seals
Freehub Body Material: Steel
Body Material: Aluminum
Brake Type: Disc Centerlock
Rim Width: 23mm
Rim Height: 24mm
Recommended Tyre Width: 700 x 25-38c
Rim Material: Aluminum
Rim Joint: Sleeve
Rim Finish: Anodized/Painted
Spoke Material: Stainless Steel
Spoke Finish: Black
Weight: 1920g (Set)
Axle: QR Skewers included
Rim Tape: Included
1.8mm Spacer Included

$475.00
Road Tubeless ready tires are now widely available as the technology, materials, and design and manufacturer commitment have improved. We also have seen the increase in tubeless ready road wheelsets across a greater price range. Shimano and Hutchinson were the two original Road Tubeless partners, so the Japanese component giant has always delivered options, and now continues to flesh out the line with this 1649 gram, rim brake, 105/Ultegra equivalent level WH-RS500 TL Wheelset.
Shimano's aluminum rims, welded joint, with machined brake tracks are outstanding. The 24mm deep rim profile design offers good rolling speed, and balanced by a 20.8mm external width (15mm internal), great lateral strength. The front carries 16 stainless steel straight-pull spokes, in high tension, to a machined aluminum hub. A 14mm oversized alloy axle carries Shimano's preferred cup and cone bearing system. The rear wheel has a stouter 20 hole hub variant laced 2x/2x with the straight pull spokes. The freehub body is steel, which holds up to considerable use, especially with loose cog cassettes.
The rim bed was designed for use with Road Tubeless tires and standard clincher tires with tubes. Tire width range is considered 23-32mm, with the sweet spot from 23-28mm. There is a max recommend weight for rider, gear and bike: 220 lbs. The freehub is 11-speed and requires a 1.8mm spacer for 9 or 10 speed use. The rim and hub anodized finish is grey, with black spokes and black alloy nipples. Shimano supplies their excellent 100/130mm dropout anodized grey quick releases and rim tape.
Great riding Tubeless Ready road wheelset for rim brake use
Can be used with standard clincher tires and tubes
Responsive speed, smooth ride, prompt acceleration, predictable cornering
Essentially a 105/Ultegra level product with grey anodized finish
Rim spec: 24mm profile, 20.8mm ext width, 15mm int width, rear asymmetric
Hubs: Machined anodized aluminum for straight pull spokes, 14mm oversized alloy axle, cup and cone bearing system
Spokes: 16 front radial, 20 rear 2x/2x; black, stainless steel, straight-pull
Nipples: Black alloy
Freehub: Steel Shimano 11 speed (use 1.8mm spacer for 9/10 spd use
Includes: 100/130mm anodized grey QR's, rim tape
Max weight: 220lbs (rider, bike, gear)
Finish: Anodized grey
Weight: 1649 grams (705g front, 944g rear)

$750.00
From road to gravel, the ULTEGRA RS770 supports wider tires for mixed surface and rough tarmac riding. The tubeless carbon laminate rims are complimented by CENTER LOCK disc brake hubs, providing confident braking in all conditions.
Efficient acceleration
- High drive rigidity
- OPTBAL
Lightweight and durable
- Carbon laminate rim
- Road tubeless
Stability
- Higher rigidity
- Road E-THRU axle
Easy maintenance and installation
- Simple handling and workability
- CENTER LOCK mount

$1,050.00
Shimano has brought full carbon wheels to a new level. With a development concept shared with DURA-ACE and ULTEGRA, the new 105 series full carbon wheels offer balanced performance at an attainable price. The C32, with its focus on accelerating and climbing performance, features reduced rotational weight aimed at terrain with punchy steep rises where weight is king. The added benefit of tubeless technology further boost the usability by allowing riders to run relatively low pressures for more comfort and control. And you can't mention tubeless without talking about the reduced risk of flats. On-road, off-road or a combination of both, the C32 wheels are here and ready for the masses.
Features:
-Simple design that can be easily matched to any bike
-Most affordable Shimano carbon road wheel to date
-32mm height full carbon rim profile
-21mm internal rim width optimized for high volume road tires (25-32c)
-Tubeless technology increase comfort and control while reducing the chances of flats
-Centerlock disc brake
-Shimano 11 & 12 speed road compatible
Specifications:
Wheel Size: 700c
ISO Diameter (ETRTO): 622
Position: Set
Tire Type: Tubeless (Clincher)
Brake Type: Disc Brake (Centerlock)
Hub: Shimano
Axle Type: Thru Axle
Hub Spacing: 12 x 100mm, 12 x 142mm
Drive Type (Rear Hub): Shimano/SRAM (11/12 Speed HG)
Rim: RS710 C32
Rim Width: 21mm (Internal), 28mm (External)
Valve: Presta
Spoke Count: 24H
Spoke Type: J-Bend
Material: Carbon
Color: Black
Weight: 1526g (w/ Tubeless Tape & Valve)

$1,400.00
The Shimano GRX RX870 wheels are designed to exponentiate the gravel experience, helping riders go faster, further, and have more fun. Wide gravel tires need a wide rim to maintain lateral tire stability at the low air pressures that we all love to run. Shimano studied this complicated relationship between tire size, rim width, air pressure, and tire lateral rigidity to optimize the GRX rim width for 32-50c tires. In addition, they pursued the best balance of rim weight, strength, and profile in order to deliver an exceptional gravel wheelset.
Features:
- Clean design that can be easily matched to any bike
- First gravel specific Shimano carbon wheel to date
- 32mm height full carbon rim profile
- 25mm internal rim width optimized for gravel tires (32-50c)
- Tubeless technology increase comfort and control while reducing the chances of flats
- Centerlock disc brake
- Shimano 11 & 12 speed road compatible

$1,400.00
With a shallow-depth aero profile and lively acceleration, the ULTEGRA R8170 C36 wheelset is a climber's delight that delivers performance every road rider will appreciate.
With the speed and efficiency of tubeless tires, the everyday performance of a shallow, aero profile carbon rim, and the convenience of 11 and 12-speed compatibility, the new ULTEGRA R8170 C36 wheelset is an upgrade for any road bike.
- 36 mm height full carbon rim
- Internal rim width: 21 mm
- Shared rim profile with R9200 DURA-ACE wheels
- Improved aerodynamics

$1,400.00
Balancing aerodynamics, weight, and affordability, the new ULTEGRA R8170 C50 wheelset is sure to inspire action on your group ride with its all-new tubeless carbon rim and updated, 12 and 11-speed compatible hub.
Summiting climbs, carving descents, or cruising the flats, the new C50 is the jack of all trades among the new ULTEGRA R8170 wheel lineup. The tubeless, carbon rim features a 21 mm internal width that pairs nicely with wider, modern tires while the HYPERGLIDE cassette body is compatible with 11 and 12-speed cassettes.
- 50 mm height full carbon rim
- Internal rim width: 21 mm
- Shared rim profile with R9200 DURA-ACE wheels
- Improved aerodynamics

$2,100.00
With stunning acceleration, the new DURA-ACE R9270 C36 wheelset will change the way you experience climbs, corners, even stop lights. This is because it isn't just how much a wheel weighs but where the weight is on the wheel that matters. The all-new C36 design shaves mass at every opportunity but especially at the rim. The result is a lively wheelset that can transform your ride.
With both a lighter, wider all-carbon rim and a lighter hub, the new DURA-ACE C36 won't shy away from a day of climbing. The new rim is 36 mm deep and still delivers good aerodynamic efficiency despite its gossamer weight. Meanwhile the hub features an alloy FREEHUB body and new engagement mechanism for increased rigidity.
- 36 mm height full carbon rim
- Internal rim width: 21 mm
- DIRECT ENGAGEMENT
- Compatible only with Shimano road 12-speed cassette sprockets

$2,100.00
The all-rounder of the new DURA-ACE wheel lineup, the C50 is both lighter than the previous C40 model and nearly as aerodynamic as the previous C60. It's a wheelset at home in a wide range of conditions. From time trials to criteriums, on rolling terrain or attempting a personal best, the new C50 is the ideal wheel for spirited road riding.
The perfect blend of low weight and aerodynamic performance, the all-new DURA-ACE C50 features an updated all-carbon tubeless rim and new hub design that drops weight while enhancing rigidity.
- 50 mm height full carbon rim
- Internal rim width: 21 mm
- DIRECT ENGAGEMENT
- Compatible only with Shimano road 12-speed cassette sprockets

$1,599.00
The relatively young Reserve crew began back in just 2014, however, with a team that tallies up decades of experience, it's unsurprising that what started as a mountain bike themed wheel-company has ascended to manufacture a full-range of sought-after dropbar bike wheelsets as well. And their 22 DT Swiss Wheelset takes aim directly at the gravel scene with its shallow profile, tubeless design. Reserve took inspiration from the famed spring-classics that notoriously test every wheelset daring enough to roll over their heavily-cobbled farm roads. Reserves settled on the low-profile and tough box-design, which we see in the 22mm deep 22, which also happens to be 22mm internal. Tubeless-ready, it's recommended to hold tires ranging from 30-45mm in width to easily handle the spread of race-ready narrow cyclocross tread to the super-low psi, meaty gravel tires for your cross-state, three-day weekend adventure.
Reserve laces the 22 with Sapim CX-Ray spokes to DT Swiss 350 hub, which offers durable and reliable rolling year-round.

$1,699.00
$1,899.00
11% Off
Roubaix. Flanders. E3. These races test wheels to their absolute limit. The best solution came in the form of a tough, box-section aluminum rim, still raced by some teams today. We took inspiration from that shape, and engineered a gravel rim with the compliance you want over harsh surfaces, but the lateral stiffness to make every effort count.
Gravel riding offers a bit of roll-your-own style, but these types of races and rides favor light weight over bump absorption, so most opt to leave the suspension at home. This is where the new Santa Cruz Reserve 22 wheels really shine.

$710.00
Feel your bike come alive on the open road with the new Alpinist CL II, featuring the lightest, best-handling clincher rims we have ever made, elevated with the performance of a tubeless system. The brand new Alpinist CL II now brings mountain-taming performance slightly closer to earth with a carefully selected build designed to let riders take full advantage of the low rim and spoke mass. The Alpinist CL II utilizes the same rim as the alpinist clx ii. They react to even the slightest increase in power with immediate acceleration and carve the purest lines in the corners, yet they can also handle almost double the impact standards of every certifying body. The result is a 1375-gram tubeless wheelset with an otherworldly ride quality designed for real-world road pressures. The Alpinist CL II utilizes components curated to keep you rolling and rolling fast. The DT Swiss 350 hubs, featuring their star ratchet drive system, are reliable and easy to service, while 24 DT Swiss comprace straight-pull spokes front and rear, laced to the rims with their alloy pro lock nipples, are synonymous with reliability and can be obtained at any bike shop. The reduced rolling resistance of a tubeless setup is undeniable, as are the benefits of improved handling and incredible puncture protection. It took the most extensive and demanding engineering and testing program we've ever undertaken. As a result of this extensive development, the Alpinist CL II features a hooked rim that can handle a huge range of pressures up to 110psi and offers an easier set up and mounting experience than ever.
- Rim: Alpinist CLX Carbon Clincher, 700c, Disc Brake, Tubeless
- Rim Details: 33mm Depth, 27mm External Width, 21mm Internal Width
- Hub: DT Swiss 350 Straightpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub
- Bearing Type: DT Swiss Sealed Steel Cartridge Bearings
- Spokes: DT Swiss Competition Race Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 276mm, NDS: 290mm; Rear: Two-cross (1:1) 24 count, DS: 283mm NDS: 287mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm
- Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi)
- Weight: Wheelset 1,375g, Front 606g, Rear 769g (including 15g, tubeless rim tape and tubeless valve)
- Assembly Method: Hand built at every step; from rim layup to the last nipple turn.
- Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

$990.00
Feel your bike come alive on the open road with the new Alpinist CL II, featuring the lightest, best-handling clincher rims we have ever made, elevated with the performance of a tubeless system. The brand new Alpinist CL II now brings mountain-taming performance slightly closer to earth with a carefully selected build designed to let riders take full advantage of the low rim and spoke mass. The Alpinist CL II utilizes the same rim as the alpinist clx ii. They react to even the slightest increase in power with immediate acceleration and carve the purest lines in the corners, yet they can also handle almost double the impact standards of every certifying body. The result is a 1375-gram tubeless wheelset with an otherworldly ride quality designed for real-world road pressures. The Alpinist CL II utilizes components curated to keep you rolling and rolling fast. The DT Swiss 350 hubs, featuring their star ratchet drive system, are reliable and easy to service, while 24 DT Swiss comprace straight-pull spokes front and rear, laced to the rims with their alloy pro lock nipples, are synonymous with reliability and can be obtained at any bike shop. The reduced rolling resistance of a tubeless setup is undeniable, as are the benefits of improved handling and incredible puncture protection. It took the most extensive and demanding engineering and testing program we've ever undertaken. As a result of this extensive development, the Alpinist CL II features a hooked rim that can handle a huge range of pressures up to 110psi and offers an easier set up and mounting experience than ever.
- Rim: Alpinist CLX Carbon Clincher, 700c, Disc Brake, Tubeless
- Rim Details: 33mm Depth, 27mm External Width, 21mm Internal Width
- Hub: DT Swiss 350 Straightpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub
- Bearing Type: DT Swiss Sealed Steel Cartridge Bearings
- Spokes: DT Swiss Competition Race Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 276mm, NDS: 290mm; Rear: Two-cross (1:1) 24 count, DS: 283mm NDS: 287mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm
- Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi)
- Weight: Wheelset 1,375g, Front 606g, Rear 769g (including 15g, tubeless rim tape and tubeless valve)
- Assembly Method: Hand built at every step; from rim layup to the last nipple turn.
- Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

$1,000.00
Taking the notion of combining flagship performance with workhorse dependability one step further, we're introducing the Terra C. This shares the same hub and spoke architecture as the Terra CL, ensuring ease of service and spoke replacement, should the need arise and is paired with an entirely new rim layup. The rims on the Terra C share the same dimensions and broad range of tire mounting possibilities as the Terra CLX and CL—33mm deep with a 25mm internal width—but are crafted using a new-to-us process known as Resin Transfer Molding. This is an automated process that allows us to very precisely control how resin is introduced to the layup, which in turn ensures maximum strength and material performance. The end result is an incredibly tough set of wheels that you can beat on to hell and back.
- Rim: Terra C RTM Carbon Clincher, 700c, Disc Brake, Tubeless Compatible
- Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width; ERD 577mm
- Hub: DT Swiss 370 J-bend Center Lock, Ratchet LN 18t internals (20 degs), 100x12mm & 142x12mm, Shim. Rd. 11sp Freehub (Convertible freehub )
- Bearing Type: DT Swiss Sealed Steel Cartridge Bearings
- Spokes: DT Swiss Competition Race J-bend, Front: Radial/Two-cross 24 count, R: 268mm, L: 279mm; Rear: Two-cross 24 count, DS: 277mm NDS: 278mm
- Nipple: DT Swiss Hex Prolock Al 2.0x14mm
- Tire Size: 28mm - 47mm; Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi
- Weight: Wheelset 1,610g, Front 719g, Rear 891g (including tubeless rim tape and tubeless valve)
- Assembly Method: Carbon Layup - Automated, Wheel Build - Hand built.
- Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit
- System Weight Limit: 275lbs / 125kg

$1,075.00
Feel your bike come alive on the open road with the new Alpinist CLX II-the lightest, best-handling clincher wheels we have ever made. Hyper-responsive acceleration, magic in the corners, sublime over rough roads, all elevated with the performance of a tubeless system. There's no room for a single excess gram whether you're chasing summits or ride quality because perfection is only achieved when there is nothing left to take away. It takes more than a lightweight rim to deliver the incredible reactivity and handling of the tubeless Alpinist CLX II. The wheelset is designed as a system with our engineers controlling and testing every part of that system-hubs, rims, spokes, lacing-and developing it hand-in-hand with Specialized Tubeless tires. The result is a 1250-gram tubeless wheelset with otherworldly ride quality. The Alpinist CLX II utilizes a hooked rim (allowing for real-world riding pressures up to 110psi, if that's your thing) for secure tire bead retention and an easier set up and mounting experience than ever before. All in a wheel that almost doubles current industry impact standards while managing to achieve the lightest weight possible. Our all-new LightAF hubs are the spinning heart of the Alpinist CLX II. We carved 50 grams out of the previous Alpinist CLX hub with new low-profile hub bodies and machined rotor mounts. Inside, DT Swiss EXP internals and SINC ceramic bearings deliver silky-smooth efficiency and outstanding durability.
- Rim: Alpinist CLX Carbon Clincher, 700c, Disc Brake, Tubeless
- Rim Details: 33mm Depth, 27mm External Width, 21mm Internal Width
- Hub: Roval Light Hub (LFD13/LF14R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub
- Bearing Type: DT Swiss SINC Ceramic Bearings
- Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 21 count, DS: 276mm, NDS: 290mm; Rear: One-cross/Two-cross (2:1), DS: 288mm NDS: 286mm
- Nipple: DT Swiss Hex Prolock Al 2.0x14mm
- Tire Size: 24mm - 38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi)
- Weight: Wheelset 1,265g, Front 670g, Rear 694g (including 15g, tubeless rim tape and tubeless valve)
- Assembly Method: Hand built at every step; from rim layup to the last nipple turn.
- Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

$1,575.00
Feel your bike come alive on the open road with the new Alpinist CLX II-the lightest, best-handling clincher wheels we have ever made. Hyper-responsive acceleration, magic in the corners, sublime over rough roads, all elevated with the performance of a tubeless system. There's no room for a single excess gram whether you're chasing summits or ride quality because perfection is only achieved when there is nothing left to take away. It takes more than a lightweight rim to deliver the incredible reactivity and handling of the tubeless Alpinist CLX II. The wheelset is designed as a system with our engineers controlling and testing every part of that system-hubs, rims, spokes, lacing-and developing it hand-in-hand with Specialized Tubeless tires. The result is a 1250-gram tubeless wheelset with otherworldly ride quality. The Alpinist CLX II utilizes a hooked rim (allowing for real-world riding pressures up to 110psi, if that's your thing) for secure tire bead retention and an easier set up and mounting experience than ever before. All in a wheel that almost doubles current industry impact standards while managing to achieve the lightest weight possible. Our all-new LightAF hubs are the spinning heart of the Alpinist CLX II. We carved 50 grams out of the previous Alpinist CLX hub with new low-profile hub bodies and machined rotor mounts. Inside, DT Swiss EXP internals and SINC ceramic bearings deliver silky-smooth efficiency and outstanding durability.
- Rim: Alpinist CLX Carbon Clincher, 700c, Disc Brake, Tubeless
- Rim Details: 33mm Depth, 27mm External Width, 21mm Internal Width
- Hub: Roval Light Hub (LFD13/LF14R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub
- Bearing Type: DT Swiss SINC Ceramic Bearings
- Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 21 count, DS: 276mm, NDS: 290mm; Rear: One-cross/Two-cross (2:1), DS: 288mm NDS: 286mm
- Nipple: DT Swiss Hex Prolock Al 2.0x14mm
- Tire Size: 24mm - 38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi)
- Weight: Wheelset 1,265g, Front 670g, Rear 694g (including 15g, tubeless rim tape and tubeless valve)
- Assembly Method: Hand built at every step; from rim layup to the last nipple turn.
- Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

$1,750.00
Following directly in the tire tracks of the Terra CLX, the new Terra CL utilizes the same super-light, incredibly tough rim as our flagship wheel. It's a hook-bead, 33mm deep carbon fiber rim with a 25mm inner width that plays well with tubeless setup and allows you to mount tires anywhere from 28mm to 47mm wide at whatever pressure you feel like running. In a nod to accessibility, durability and real-world serviceability, we opted to use ultra-dependable DT Swiss 350 hubs and lace them to the rims with DT Swiss Competition Straightpull spokes. The net effect of these changes is a wheelset that is almost as light as our incredibly light Terra CLX, offering close to the same benchmark performance but with more easily sourced spokes in the event of some back-of-beyond carnage, all with a price tag that is about half that of our flagship product.
- Rim: Terra CLX Carbon Clincher, 700c, Disc Brake, Tubeless Compatible
- Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width; ERD 577mm
- Hub: DT Swiss 350 Straight-pull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. Rd. 11sp Freehub (Convertible freehub )
- Bearing Type: DT Swiss Sealed Steel Cartridge Bearings
- Spokes: DT Swiss Competition Race Straightpull, Front: Two-cross (1:1) 24 count, R: 287mm, L: 286mm; Rear: Two-cross (1:1) 24 count, DS: 284mm NDS: 287mm
- Nipple: DT Swiss Hex Prolock Al 2.0x14mm
- Tire Size: 28mm - 47mm; Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi
- Weight: Wheelset 1,408g, Front 654g, Rear 754g (including tubeless rim tape and tubeless valve)
- Assembly Method: Hand built at every step; from rim layup to the last nipple turn.
- Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit
- System Weight Limit: 275lbs / 125kg

$1,599.00
Bringing cutting edge performance to the diverse needs of drop bar off-roaders, the coveted Reserve gravel wheelset has been redesigned and is ready for any dirt adventure you can dream up. Wider than Reserve's previous gravel wheels, the 25|GR plays nicely with today’s slew of big volume gravel tires. A semi-hooked rim makes tubeless set up easier than ever and like all Reserve wheels, the 25|GR has a lifetime warranty supported by a no-fault crash replacement. And in keeping with its workmanlike ways, you’ll find external nipples and standard spokes, which makes the wheels easy to keep tensioned up and in tip-top shape.

$1,699.00
$1,899.00
11% Off
Enjoy the simple pleasures of getting off-road on your drop bar rig with the Reserve 22|GR. Designed to handle anything you can throw at them, this gravel-specific wheelset provides compliance over harsh surfaces with the lateral stiffness to make every effort count. Capable of fitting tires up to 45c, the 22mm internal-width rims allow you to run a wide range of tires and tire pressure to provide unparalleled versatility.

$214.00
The entry into the world of gravel riding, the G 1800. If you want to give cycling a try and plan to do your first rides off-road the G 1800 is your choice of wheel. Combining all the key advantages of DT's gravel segment wheels at a very attractive price point, these wheels may be your entry into the world of gravel riding. Leave for beaten roads and turn to the unexplored paths, the G 1800 will join you.
- 370 based hub

$229.00
At the core of this all-around wheelset lies a modern, wide and light aluminum rim. Being the foundations of the wheel, it makes for a balanced width to stiffness to weight ratio. The rim is complemented by DT's proven pawl drive system and a high end build with bladed spokes and alloy nipples. These features make it a premium training wheel easily able to race your mates to the city limits sign.
- Spline hub
- Straight-pull hub and spokes are radial laced
- Includes RWS Eco skewer, tubeless ready tape and tubeless valve

$278.00
The entry into the world of gravel riding, the G 1800. If you want to give cycling a try and plan to do your first rides off-road the G 1800 is your choice of wheel. Combining all the key advantages of DT's gravel segment wheels at a very attractive price point, these wheels may be your entry into the world of gravel riding. Leave for beaten roads and turn to the unexplored paths, the G 1800 will join you.
- 370 based hub

$315.00
At the core of this all-around wheelset lies a modern, wide and light aluminum rim. Being the foundations of the wheel, it makes for a balanced width to stiffness to weight ratio. The rim is complemented by DT's proven pawl drive system and a high end build with bladed spokes and alloy nipples. These features make it a premium training wheel easily able to race your mates to the city limits sign.
- Spline hub with 3-pawl system
- Straight-pull hub and spokes are radial laced
- Includes RWS Eco skewer, tubeless ready tape and tubeless valve
Page 1 of 2
Next page